MGL Avionics ALT-5 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor MGL Avionics ALT-5 (13 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
Introduction
The ALT-5 is a 2 1/4” sunlight readable encoding altimeter and a wide range vertical speed indicator.
The altimeter contains an internal high accuracy 24 bit digital altitude sensor which calculates altitude from -1000 ft up to
a maximum of 35000 ft. The ALT-5 outputs various formatted RS232 serial data protocols compatible with serial input
transponders such as that from Garmin, Magellan, Northstar, Trimble, Microair etc. The altimeter can display altitude in
feet or meters and local pressure can be set in millibars or inches of mercury
The VSI indicator can be displayed in either feet/minute (ft/min) or meters/second (m/s). The VSI can be calibrated by the
user once the instrument has been installed in the aircraft.
The ALT-5 also features a user settable altitude bug and an encoder test function. The ALT-5 provides a parallel Gillham
code interface when used in conjunction with the MGL Avionics CNV-ALT.
1 Features
Large 1.8” high resolution 160x128, sunlight readable, wide viewing angle, 1000 cd/m2 TFT LCD display
An internal high accuracy 24 bit digital altitude sensor calculates altitude from –1000 ft up to a maximum
of 35000 ft (-304m to 10668m)
The ALT-5 outputs various formatted RS232 serial data protocols compatible with serial input
transponders such as that from Garmin, Magellan, Northstar, Trimble, Microair etc.
Provides a parallel Gillham code interface for transponders when used in combination with the MGL
Avionics CNV-ALT
Built in encoder test function
The altimeter can display altitude in feet or meters
Local pressure can be set in millibars or inches of mercury
Contains a wide range VSI indicator from +/-20 ft/min to as high as +/-10000 ft/min
VSI units can be in feet/minute (ft/min) or in meters/second (m/s)
User settable altitude bug
Standard 2 1/4” aircraft enclosure (can be front or rear mounted)
Rotary control plus 2 independent buttons for easy menu navigation and user input
Wide input supply voltage range of 8 to 30V DC with built in voltage reversal and over voltage protection
for harsh electrical environments
1 year limited warranty
Vega ALT-5
Altimeter and Vertical Speed Indicator
with a transponder compatible serial
RS232 output
Operating Manual – English 1.00
Vega ALT-5 Operating Manual Page 2
2 ALT-5 Layout
3 Main Displays
The ALT-5 has 2 different display screens. The main display screen can be selected in the menu. “ALT SETUP”
3.1 Altitude "TAPE" Display
F2 / Down Button:
Menu system: Softkey button
Normal display: Altitude
bug setting display
Sunlight readable color
graphic display:
Backlight can be adjusted in the
menu system
Rotary Control (Up/Down) & Enter Button:
Press the rotary control during the normal display screens to access the menu system. Rotate anti/clockwise
for up/down menu scrolling. Rotate the rotary control during the normal display mode to adjust the local
pressure. Local pressure can be set in either mB or in “Hg.
F1 / Up Button:
Menu system: Softkey button
Normal display: Enable/disable
altitude bug
2 1/4” enclosure.
Can be front or rear mounted
VSI scale indication
VS I (Vertical Speed Indication)
VSI unit
Altitude Tape
Altitude Value
Altitude Bug
Local pressure readout (Either in mB or in “HG)
VSI Value
Altitude unit
Vega ALT-5 Operating Manual Page 3
3.2 Altitude "CLASSIC" Display
3.3 Altitude Bug
Press the F2/Down button during the altitude “TAPE” display to access the altitude bug setting screen. Press the F1/UP
key to set the altitude bug to the current altitude or use the rotary control to adjust the altitude bug. Press the F2/Down
key to change the increment / decrement unit to 50 or 500. Press the rotary control to exit and save.
Press the F1/Up button during the normal altitude TAPE” display to enable or disable the altitude bug. The bug will be
yellow when in the display screen and cyan when either above or below the limits of the display.
VSI Value
VSI unit
Altitude unit
Altitude Value
VSI scale indication
VSI (Vertical Speed Indication)
Local pressure readout (Either in mB or in “HG)


Product specificaties

Merk: MGL Avionics
Categorie: Meetapparatuur
Model: ALT-5

Heb je hulp nodig?

Als je hulp nodig hebt met MGL Avionics ALT-5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur MGL Avionics

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur