Metra 99-7613 Handleiding

Metra Niet gecategoriseerd 99-7613

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7613 (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

I N S TA L L AT I O N I N S T R U C T I O N S

U . S . P AT E N T # D 7 0 4 , 6 9 7

99-7613

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. nsure that all installation

connections, especially the air bag indicator

lights, are plugged in before reconnecting

the battery or cycling the ignition to test this

product.

NOTE: Refer also to the instructions included

with the aftermarket radio.

KIT FEATURES

• ISO DIN radio provision with pocket • ISO DDIN radio provision

KIT COMPONENTS

• A) Radio housing • B) Bracket set A • C) Bracket set B • D) ISO DDIN trim plate • E) #8 x 3/8" Phillips screws (4) TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..............................................3-5

Kit Assembly

ISO DIN radio provision with pocket ...................6

ISO DDIN radio provision ................................. 6-7

(See page 2 for Table of Contents by model)

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7552

Antenna Adapter: • 40-NI12

A B C E

Nissan Multi-Kit 2007-2015

Visit for more detailed information about the product and up-to-date MetraOnline.com

vehicle speciﬁc applications

Visit or Metraonline.com AxxessInterfaces.com

for harness and interface options.

APPLICATIONS

Nissan

Juke 2011-2014

Rogue 2011

Rogue S 2012-2013

Rogue SV

(w/SL package)

2012-2013

Rogue Select

(w/lower model radio)

2014-2015

Versa 2007-2013

Versa S 2014

Versa S+ 2014

Versa SV base 2014

386.257.1187

MetraOnline.com

Juke 2011-2014

For manual climate controls:

Lift up to remove the small knob on the slide

for “recirc/ fresh air”.

2. Using the panel removal tool, carefully unclip

and remove the trim from around the climate

controls. (Figure A)

Note: Climate controls stay in the dash.

3. Remove (2) Phillips screws securing the radio

trim panel. (Figure B)

4. Remove (4) Phillips screws securing the

radio, disconnect the wiring, and then remove

the radio. (Figure C)

Continue to Kit Assembly

For auto climate controls:

Using the panel removal tool, carefully unclip and

remove the climate control panel. (Figure A-2)

2. Remove (2) Phillips screws securing the radio

trim panel. (Figure B)

3. Remove (4) Phillips screws securing the radio,

disconnect the wiring and then remove the

radio. (Figure C)

Continue to Kit Assembly

(Figure C)

(Figure A-2)

(Figure B)

DASH DISASSEMBLY

(Figure A-1)

TABLE OF CONTENTS

(cont.)

Nissan

Juke 2011-2014 ..............................................2

Rogue 2011 ....................................................3

Rogue S 2012-2013 ........................................3

Rogue SV (with SL package) 2012-2013 ......3

Rogue Select (with lower model radio)

2014-2015....................................................3

Versa 2007-2013 ............................................4

Versa S 2014 ..................................................5

Versa S+ 2014 ................................................5

Versa SV base 2014 .......................................5

REV. 7/13/22 INST99-7613 3

Rogue 2011, Rogue S

2012-2013

Rogue SV (with SL package)

2012-2013,

Rogue Select (with lower model radio) 2014-2015

1. If equipped with center speaker: Using the

panel removal tool, carefully unclip and

remove the grille then remove (4) Phillips

screws to remove the speaker. (Figure A)

2. Using the panel removal tool, unclip and

remove the panel below the radio, including

the A/C controls. (Figure B)

3. Unclip the radio trim, including the A/C vents,

then unplug the hazard switch and remove

the panel. (Figure C)

4. Remove (4) Phillips screws securing the radio,

disconnect the wiring, and then remove the

dio. (Figure D)

Continue to Kit Assembly

(Figure D)

(Figure B)

(Figure C)

(Figure A)

DASH DISASSEMBLY

Product specificaties

Merk:	Metra
Categorie:	Niet gecategoriseerd
Model:	99-7613

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7613 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Metra

Metra 95-7022HG Handleiding

12 November 2024

Metra 95-7642 Handleiding

12 November 2024

Metra 71-017C Handleiding

26 September 2024

Metra AXSP-HK Handleiding

26 September 2024

Metra 109-TO7 Handleiding

24 September 2024

Metra 95-8273B Handleiding

6 September 2024

Metra 95-7822 Handleiding

6 September 2024

Metra 82-8703 Handleiding

6 September 2024

Metra 88-00-9004 Handleiding

6 September 2024

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux IAN 071407 Handleiding

29 November 2024

Livarno Lux IAN 317128 Handleiding

29 November 2024

Livarno Lux IAN 049213 Handleiding

29 November 2024

Livarno Lux ST-1002 Handleiding

29 November 2024

Livarno Lux HG02489 Handleiding

29 November 2024

Livarno Lux HG02189 Handleiding

29 November 2024

Livarno Lux IAN 365198 Handleiding

29 November 2024

Livarno Lux IAN 367074 Handleiding

29 November 2024

Livarno Lux HG00701 Handleiding

29 November 2024

Livarno Lux IAN 337273 Handleiding

29 November 2024