Metra 99-7522B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7522B (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.®MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 9/6/17 INST99-7522B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7522B
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black to match factory finish
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) Pocket • D) (4) Panel clips • E) (4) #8 x 3/8” Phillips pan head screws
• F) (4) #8 x 3/8” Phillips truss head screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
. ISO DIN radio provision with pocket ................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7903 • AX-LCD (Mazda6 only)
Antenna Adapter: 40-HD10
A B C D E F
Mazda CX5 2013-2015 2016, CX5 Sport ,
Mazda6 2014-2015
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unsnap and remove the trim panel above the glove box
and climate controls. This panel will include the climate
vents and hazard button. (Figure A)
Note:
Do not cycle the key while the hazard button is
disconnected.
2. Unsnap and remove the trim from around the factory
radio. (Figure B)
3. Remove (2) Phillips screws, and (1) 10mm bolt securing
the factory radio, then unplug and remove.
Continue to Kit Assembly (Figure A)
(
Figure
B)
REV. 9/6/2017 INST99-7522B 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Install the (4) included
panel clips
to the back of the
radio
housing
.
Note:
The factory clips removed in disassembly can also
be used if so desired.
2. Mount the
pocket
to the
radio brackets
with (4) #8 x 3/8”
Phillips pan head screws supplied. (Figure A)
3. Attach the completed assembly to the
radio housing
with
(4) #8 x 3/8” Phillips truss head screws supplied.
(Figure B)
4. Remove the metal “DIN” sleeve and trim ring from the
aftermarket radio.
5. Slide the radio into the completed assembly and secure
with screws supplied with the radio. (Figure C)
6. Locate the factory wiring harness and antenna connector
in the dash and complete all necessary connections to
the radio. Metra recommends using the proper mating
adapter from Metra and/or AXXESS. Test the radio for
proper operation.
7. Reassemble the dash in reverse order of disassembly.
(Figure A)
(Figure B)
(Figure C)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-7522B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7522B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd