Metra 99-7380HG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7380HG (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV.7/12/17 INST99-7380HG
I N S TA L L A T I O N I N S T R U C T I O N S
99-7380HG
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted gloss black to match the factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7304
• Visit metraonline.com for premium options
Antenna Adapter: Not required
A B C D
Hyundai Elantra GT (with factory navigation) 2016-up*
*Visit metraonline.com for up-to-date vehicle specific applications.
1.800.221.0932
|
MetraOnline.com
DASH DISASSEMBLY
2
1. Unsnap and remove the vent panels
from either side of the radio down to the
shifter base. (Figure A)
2. Remove the (4) screws and remove
the radio. (Figure B)
Continue to Kit Assembly
(Figure A)
(Figure B)
REV. 7/12/2017 INST99-7380HG 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
housing trim panel
with (4) #8 x 3/8”
Phillips screws supplied (Figure A)
2. Mount the
pocket
to the bracket/panel
assembly with (4) #8 x 3/8” Phillips screws
supplied. (Figure B)
3. Remove the metal DIN sleeve and trim ring
from the aftermarket radio.
4. Slide the radio into the assembly and
secure with screws supplied with the radio.
(Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation.
6. Mount the new radio assembly into the
dash and reassemble the dash in reverse
order of disassembly.
ISO DDIN radio provision
1. Attach the
radio brackets
to the
radio
housing trim panel
with (4) #8 x 3/8”
Phillips screws supplied (Figure A)
2. Slide the radio into the assembly and
secure with screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation.
4. Mount the new radio assembly into the
dash and reassemble the dash in reverse
order of disassembly.
(Figure A) (Figure A)
(Figure B) (Figure B)
(Figure C)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-7380HG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7380HG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd