Metra 99-6516B Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-6516B (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 122 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 3/4/2014 INST99-6516B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 99-6516B
• A) Radio housing trim panel • B) Radio housing • C) ISO Brackets • D) ISO Trim plate • E) Double DIN brackets
• F) Double DIN trim plate • G) Pocket • H) (7) metal panel clips • I) (8) #6 Phillips screws
KIT COMPONENTS
• DIN radio provision with pocket
• ISO radio provision with pocket
• Double DIN radio provision
• Painted matte black
KIT FEATURES
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6502-NAV - Chrysler CAN R.A.P. interface 2004-up
• CHTO-01 - Chrysler CAN amp interface 2004-up
Antenna Adapter: • 40-CR10 - Chrysler antenna adapter 2004-up
• Flat blade screwdriver • Panel removal tool
• Phillips screwdriver • Socket wrench • Cutting tool
TOOLS REQUIRED
A B C
G
D
H I
E F
Dash Disassembly
– Chrysler 300 2005-2007 ...................................... 2
Kit Assembly
– DIN radio provision with pocket ............................ 2
– ISO radio provision with pocket ............................ 3
– Double DIN radio provision ................................... 3
Table of Contents
99-6516B
1. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents and
clock. (Figure A)
2. Remove (4) 7mm screws securing
radio to dash and remove radio.
(Figure B)
3. Remove factory vents, clock,
switch plate, and climate controls
from the factory radio panel and
transfer to the 99-6516B radio
panel using the screws provided in
this package.
Continue to kit assembly
Dash Disassembly Kit Assembly
(Figure A)
(Figure B)
DIN radio provision with pocket
1. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage until secure. (Figure B)
3. Snap the pocket into the radio
housing. (Figure C)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure C)
(Figure B)
99-6516B
Kit Assembly
ISO radio provision with pocket
1. Mount the ISO Brackets to the
radio with the screws supplied
with the unit. (Figure A)
2. Slide the radio into the radio
opening until the side clips engage.
(Figure B)
3. Snap the ISO Trim Plate into the
radio housing. (Figure C)
4. Snap the pocket into the radio
housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure C)
(Figure B)
right side clip
Double DIN radio provision
1. Cut and remove center divider in
radio housing. (Figure A)
2. Snap the double DIN brackets
to the inside edge of the radio
housing. (Figure B)
3. Slide the double DIN radio unit
into the double DIN bracket/radio
housing assembly and secure
the radio unit to the kit using the
screws supplied with the radio
unit. (Figure C)
4. Snap the double DIN trim-plate
onto the housing/radio assembly.
(Figure D)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly, using the new
Metra radio housing trim panel.
(Figure A)
(Figure B)
(Figure C)
(Figure D)
Product specificaties
| Merk: | Metra |
| Categorie: | Carkit |
| Model: | 99-6516B |
Heb je hulp nodig?
Als je hulp nodig hebt met Metra 99-6516B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Carkit Metra
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
Handleiding Carkit
- Carkit JVC
- Carkit Kenwood
- Carkit Motorola
- Carkit Medion
- Carkit Nokia
- Carkit Pioneer
- Carkit Siemens
- Carkit Alpine
- Carkit Belkin
- Carkit Blaupunkt
- Carkit Boss
- Carkit Brigmton
- Carkit Brodit
- Carkit Bury
- Carkit Dymond
- Carkit Einhell
- Carkit Envivo
- Carkit Gembird
- Carkit Hama
- Carkit HQ
- Carkit Iluv
- Carkit Kensington
- Carkit Kogan
- Carkit Lenco
- Carkit Livoo
- Carkit Manhattan
- Carkit Manta
- Carkit Mr Handsfree
- Carkit MT Logic
- Carkit Nedis
- Carkit Parrot
- Carkit Pyle
- Carkit Renegade
- Carkit Renkforce
- Carkit Silvercrest
- Carkit Sony Ericsson
- Carkit SuperTooth
- Carkit Technaxx
- Carkit Thule
- Carkit TomTom
- Carkit Trust
- Carkit Uniden
- Carkit Veho
- Carkit Jabra
- Carkit Jensen
- Carkit B-Speech
- Carkit BeeWi
- Carkit Caliber
- Carkit Exibel
- Carkit T'nB
- Carkit Hamron
- Carkit Clarion
- Carkit Cobra
- Carkit Arkon
- Carkit Scosche
- Carkit WAGAN
- Carkit Havis
- Carkit I-Tec
- Carkit BlueAnt
- Carkit SBS
- Carkit Cellular Line
- Carkit PAC
- Carkit KRAM
- Carkit NAV-TV
- Carkit Ergotron
- Carkit Konig & Meyer
- Carkit Alpin
- Carkit Novus
- Carkit Foliatec
- Carkit THB
- Carkit Perfect Choice
- Carkit SiriusXM
Nieuwste handleidingen voor Carkit
17 November 2024
15 November 2024
30 Juli 2024
30 Juli 2024
19 Juni 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024
27 Mei 2024