Metra 95-8731 Handleiding

Metra Carkit 95-8731

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-8731 (4 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 11/22/19 INST95-8731
I N S TA L L AT I O N I N S T R U C T I O N S
95-8731
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
Polished gloss black to match the factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) #8 x 3/8” Phillips pan-head screws (4)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx T-20 screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wire Harness: See metraonline for harness and
interfacing solutions
Antenna Adapter: 40-EU10
A B C
Mercedes Sprinter2019-Up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
† Excluding models with a touchscreen radio
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the radio trim panel.
(Figure A)
2. Remove (4) Torx T-20 screws securing
the radio and pocket assembly. Slide the
assembly out, then unplug and remove.
(Figure B)
Continue to Kit Assembly
(Figure A) (Figure B)
DASH DISASSEMBLY
REV. 11/22/2019 INST95-8731 3
(Figure A) (Figure B)
1. Secure the radio brackets to the radio
trim panel using (4) #8 x 3/8” Phillips
pan-head screws provided. (Figure A)
2. Slide the radio into the bracket/panel
assembly, then secure using screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Slide the radio assembly into the dash,
then secure using the factory screws.
5. Attach the factory radio trim panel to
complete the installation.
KIT ASSEMBLY


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 95-8731

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-8731 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Metra

Metra 99-7339B Handleiding

17 November 2024
Metra

Metra 99-7345B Handleiding

17 November 2024
Metra

Metra AX-ADCT4 Handleiding

17 November 2024
Metra

Metra 95-7883HG Handleiding

17 November 2024
Metra

Metra 95-5026 Handleiding

17 November 2024
Metra

Metra 99-7367HG Handleiding

23 Augustus 2024
Metra

Metra 99-8223 Handleiding

23 Augustus 2024
Metra

Metra 99-7422 Handleiding

23 Augustus 2024
Metra

Metra 99-7875 Handleiding

23 Augustus 2024

Handleiding Carkit

Nieuwste handleidingen voor Carkit