Metra 95-8272B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-8272B (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 3/28/24 INST95-8272B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
I N S TA L L AT I O N I N S T R U C T I O N S
95-8272B
KIT FEATURES
ISO DDIN radio provision
Painted scratch resistant matte black
Single ISO DIN radio provision with 88-00-9004 pocket
sold separately
KIT COMPONENTS
• A) Front housing • B) Rear housing • C) Radio brackets • D) #8 x 3/8” Phillips screws (4) • E) #4 x 3/8” Phillips screws (8)
TOOLS REQUIRED
• Panel removal toolPhillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly.............................................. 2-3
Kit Preparation 4 .......................................................
Kit Assembly ..........................................................5
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio/video and
steering wheel control interface options.
Wire harness: 70-1761
Antenna adapter: 40-NI12
A B C D E
Subaru /Toyota BRZ GR86 2022-2024
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
(Figure B) (Figure D)
(Figure A) (Figure C)
DASH DISASSEMBLY
1. Unclip and remove the panel from the
end of the passenger side of the dash
with the door open. (Figure A)
2. Unclip and remove the trim panel above
the glove box and below the right side
air vent. (Figure B)
3. Unclip and remove the trim panel
above the trim panel removed in step 2.
(Figure C)
4. Remove (1) Phillips screw from the right
side of the drivers knee bolster panel
the unclip panel and let hang. (Figure D)
REV. 3/28/2024 INST95-8272B 3
DASH DISASSEMBLY
(CONT.)
(Figure F)
(Figure E) (Figure G)
5. Unclip and remove the A/C vents.
(Figure E)
6. Remove (4) 10 MM bolts securing the
radio then unclip and remove the radio
from the dash. (Figure F)
7. Remove (4) Phillips screws securing the
back plate to the factory radio and keep
for kit assembly. (Figure G)
Continue to Kit Preparation


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-8272B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-8272B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd