Metra 95-7822 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-7822 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/10/24 INST95-7822
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
I N S TA L L AT I O N I N S T R U C T I O N S
95-7822
KIT FEATURES
DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio bracket • C) #14 x 1/2” Phillips screw (1)
TOOLS REQUIRED
• Panel removal toolPhillips screwdriver
TABLE OF CONTENTS
Dash Disassembly 2 ..................................................
Kit Assembly .......................................................... 3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio/video and
steering wheel control interface options.
Wire harness: 70-1729
Antenna adapter: 40HD-11
A B C
Honda CR-Z (with factory navigation) 2011-2016
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the lower dash panel
cover above the pocket and remove the
8mm/Phillips screw. (Figures A and B)
2. Unclip and remove the radio from the
dash. (Figure C)
Tip: Start at the top of the radio.
(Figure B) (Figure D)
(Figure C) (Figure A)
3. Unplug and remove the radio.
4. Disassemble the factory NAV unit by
removing the (4) Phillips screws holding
it to the factory dash panel. (Figure D)
Continue to Kit Assembly
REV. 4/10/2024 INST95-7822 3
KIT ASSEMBLY
(Figure B)
1. radio bracketSecure the to the factory
dash panel using the factory hardware.
(Figure A)
2. radio trim panelSnap the into the
factory dash panel. (Figure B)
3. Slide the DDIN radio into the radio
bracket assembly and secure using
hardware supplied with the radio.
(Figure C)
(Figure A) (Figure C)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order of
disassembly. A #14 x 1/2” screw has
been provided if the factory 8mm
mounting screw has been lost or
discarded.


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-7822

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-7822 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024
Metra

Metra 95-7021HG Handleiding

6 September 2024
Metra

Metra 82-5608 Handleiding

6 September 2024
Metra

Metra 82-8152 Handleiding

6 September 2024
Metra

Metra 82-8153 Handleiding

6 September 2024
Metra

Metra 82-8606 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd