Metra 95-7617GHG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-7617GHG (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
INSTALLATION INSTRUCTIONS FOR PART 95-7617GHG
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 4/3/2013 INST95-7617GHG
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
• Double DIN radio provision
• Painted Grey High Gloss
• A) Radio Trim Panel • B) Radio Brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 2010-Up Nissan Wire Harness • 70-7554 2010-Up Nissan Wire Harness
Antenna Adapter: • 40-NI12 2010-Up Nissan Antenna Adapter
• Panel removal tool • Phillips screwdriver • Socket Wrench
TOOLS REQUIRED
(Sedan)
A B
Dash Disassembly
– Nissan Altima 2013-up ......................................... 2
Kit Assembly
– Double DIN radio provision .................................... 3
99-7617GHG
Dash Disassembly
1. Unclip the right side of the driver’s
knee bolster panel next to the
center console and let hang. Note:
There is no need to completely
remove the panel. (Figure A)
2. Unclip and remove the (2) silver
side trim panels from each side of
the factory radio. (Figure B)
3. Unclip and remove trim panel
below the a/c control panel.
(Figure A)
(Figure D)
(Figure B)
(Figure E)
(Figure C)
(Figure F)
4. Remove (4) Phillips screws
securing the factory radio, a/c
control and a/c vents. (Figure C)
5. Remove the a/c controls.
(Figure D)
6. Remove the a/c vent panel.
(Figure E)
7. Remove the factory radio.
(Figure F)
8. If equipped there may be an a/c
amp present attached under the
radio remove (2) Phillips screws
securing the a/c amp.
Continue to kit assembly
99-7617GHG
Kit Assembly
Double DIN radio provision
1. If equipped attach the a/c amp to
the radio brackets with the factory
hardware. (Figure A)
2. Mount the DDIN radio to the radio
brackets using the screws supplied
with the radio. (Figure A)
3. Mount the radio/bracket assembly
into the dash.
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.
(Figure A)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-7617GHG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-7617GHG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd