Metra 95-6546B Handleiding

Metra Carkit 95-6546B

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-6546B (4 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 216 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 4/5/18 INST95-6546B
I N S TA L L A T I O N I N S T R U C T I O N S
95-6546B
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (2) Panel clips TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool • Grinding tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness:
70-1817 (99-01) • 70-6502 (02-04)
Antenna Adapter:
N/A (99-01) • 40-CR10 (02-04)
A B C
Jeep Grand Cherokee 1999-2004
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the radio trim panel.
(Figure A)
2.
Remove (4) Phillips screws securing the
radio, then unplug and remove the radio
.
Continue to Kit Preparation
1.
Carefully grind or cut away the (4) plastic
welded tabs securing the a/c vents to the
radio trim panel, then remove the vents.
(Figure A)
2.
Trim the top of the a/c vents. (Figure B)
3.
Attach the a/c vents to the radio trim
panel, then secure them by either gluing
them, or plastic welding them in place.
Note:
Once the radio trim panel is
secured to the vehicle, this will also hold
the vents in place.
4.
Attach the (2)
panel clips
provided onto
the
radio trim panel
.
5.
Cut the sub-dash to allow room for the
radio assembly. (Figure C)
Continue to Kit Assembly
(Figure A)
DASH DISASSEMBLY KIT PREPARATION
(Figure A)
(Figure B)
(Figure C)
Remove shaded area
REV. 4/5/2018 INST95-6546B 3
(Figure A)
1. Secure the
radio brackets
to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Snap the
radio trim panel
over the radio
assembly to complete the installation.
KIT ASSEMBLY


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 95-6546B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-6546B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Metra

Metra 99-7339B Handleiding

17 November 2024
Metra

Metra 99-7345B Handleiding

17 November 2024
Metra

Metra AX-ADCT4 Handleiding

17 November 2024
Metra

Metra 95-7883HG Handleiding

17 November 2024
Metra

Metra 95-5026 Handleiding

17 November 2024
Metra

Metra 99-7367HG Handleiding

23 Augustus 2024
Metra

Metra 99-8223 Handleiding

23 Augustus 2024
Metra

Metra 99-7422 Handleiding

23 Augustus 2024
Metra

Metra 99-7875 Handleiding

23 Augustus 2024

Handleiding Carkit

Nieuwste handleidingen voor Carkit