Metra 95-6535B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-6535B (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
REV. 1/25/2017 INST95-6535B
INSTALLATION INSTRUCTIONS FOR PART 95-6535B
METRA. The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DDIN radio provision
Painted matte black
A) Radio trim panel • B) Radio brackets
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • XSVI-6523-NAV
Antenna Adapter: 40-EU55
Panel removal tool • Cutting tool
T-25 Torx screwdriver
;663:9,8<09,+
Fiat 500X 2016-up
95-6535B
A
Table of Contents
B
Dash Disassembly ................................................. 2
Kit Assembly
ISO DDIN radio provision ...................................... 3
95-6535B
2
Dash Disassembly
1. Open upper storage compartment
on passenger side. (Figure A)
2. Unclip, unplug, and remove painted
hazard button panel below the radio.
(Figure A)
3. Unscrew (2) T-25 Torx screws at the
bottom of the radio trim. (Figure B)
4. Unclip the radio trim. (Figure B)
5. Unscrew (4) T-25 Torx screws
securing the radio into the dash.
(Figure C)
6. Unplug and remove the radio from
the dash. (Figure C)
7. Cut the shaded areas in the dash
cavity to gain suitable depth for the
new radio chassis (CAUTION: The
vents are located directly behind the
area to be cut, use extreme caution
to not cut into them). Be careful, you
may want to make multiple cuts.
(Figures D, E)
Continue to kit assembly.
(Figure A)
(Figure C)
(Figure B)
(Figure E)
(Figure D)
Be careful not to cut
into the vents!
First cut
Second cut
Remove shaded area
Remove shaded area
95-6535B
3
Kit Assembly
(Figure A) (Figure B)
ISO DDIN radio provision
1. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Insert the radio trim panel into the
factory radio trim removed in step
4 of dash disassembly. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the dash,
complete all necessary connections
to the radio and test the radio
for proper operation. Metra
recommends using the proper
mating adapter from
Metra and/or AXXESS.
4. Mount the radio into the dash using
the factory hardware.
5. Reassemble the dash in the reverse
order of disassembly.


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-6535B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-6535B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd