Metra 95-6532B Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Metra 95-6532B (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
METRA. The World’s best kits.β„’metraonline.com Β© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 9/23/2015 INST95-6532B
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 95-6532B
β€’ A) Radio trim panel β€’ B) Radio brackets β€’ C) (4) White panel clips
20;ξ˜ƒ*64765,5;:
>0905.ξ˜ƒξ˜ξ˜ƒ(5;,55(ξ˜ƒ*655,*;065: (sold separately)
Wiring Harness: β€’ XSVI-6523-NAV
Antenna Adapter: β€’ 40-EU55 Amplified antenna adapter
β€’ Panel removal tool β€’ Phillips screwdriver
β€’ Torx driver
;663:ξ˜ƒ9,8<09,+
Jeep Renegade 2015-up
95-6532B
A B
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DDIN radio provision ...................................... 3
Table of Contents
β€’ ISO DDIN radio provision
β€’ Painted to match factory finish
20;ξ˜ƒ-,(;<9,:
C
95-6532B
2
Dash Disassembly
ξ˜˜ξ˜• Unclip and remove the trim panel
surrounding the factory radio.
(Figure A)
ξ˜™ξ˜• Remove (4) T-20 Torx Screws
securing the radio. (Figure B)
ξ˜šξ˜• Unplug and remove the radio.
ξ˜›ξ˜• Cut shaded area at the top of the
radio cavity. (Figure C)
Continue to kit assembly
(Figure A)
(Figure B)
(Figure C)
Remove
shaded
area
95-6532B
3
Kit Assembly
ISO DDIN radio provision
1. Attach the (4) supplied white panel
clips radio housing to the .
(Figure A)
2. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in the
reverse order of disassembly using
the 6532 instead radio trim panel
of the factory radio panel.
(Figure A) (Figure B)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-6532B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-6532B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd