Metra 95-6523 Handleiding

Metra Carkit 95-6523

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-6523 (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 9/18/2014 INST95-6523
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 95-6523
• Double DIN radio provision
•
Custom texture
• A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) (4) White plastic panel clips
• E) (8) 5mm x 12mm Phillips Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1784 or XSVI-6523-NAV
Antenna Adapter: • 40-VW10 or 40-EU10
• Panel removal tool • Phillips screwdriver
• 86-5618 radio removal tool
• 86-3528 radio removal tool
TOOLS REQUIRED
D E
Dash Disassembly
– Ram Promaster 2014-up ...................................... 2
Kit Assembly
– Double DIN radio provision ................................... 3
Table of Contents
A B C
95-6523
Dash Disassembly
With radio delete or Single DIN
factory radio:
1. Using Metra’s 86-5618 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws in
bottom of dash opening.
3. Unclip and remove the factory
radio trim panel.
With Double Din factory radio:
1. Using Metra’s 86-3528 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws from
the bottom of the dash opening.
(Figure A)
95-6523
Kit Assembly
Double DIN radio provision
1. Attach the (4) panels clips to the
radio trim panel. (Figure A)
2. Break the small locating pin
from inside surface of each
radio bracket. (Figure B)
3. Position the radio mounting
brackets into the sub dash opening
and secure with the (2) Phillips
screws removed in disassembly.
(Figure C)
4. Attach the radio brackets to
the aftermarket radio using the
screws supplied with the radio or
the supplied (8) Phillips screws.
Note: Screws must not protrude
from slot in radio brackets as
interference with mounting
bracket will occur when sliding
radio into mounting brackets.
(Figure D)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
6. Slide the aftermarket radio into the
radio opening between the radio
mounting brackets until it clips into
the opening. (Figure E)
7. Snap the radio trim panel into
the opening around the
aftermarket radio.
(Figure C)
(Figure A)
(Figure B)
(Figure E)
(Figure D)
Remove pin


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 95-6523

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-6523 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Metra

Metra 99-7339B Handleiding

17 November 2024
Metra

Metra 99-7345B Handleiding

17 November 2024
Metra

Metra AX-ADCT4 Handleiding

17 November 2024
Metra

Metra 95-7883HG Handleiding

17 November 2024
Metra

Metra 95-5026 Handleiding

17 November 2024
Metra

Metra 99-7367HG Handleiding

23 Augustus 2024
Metra

Metra 99-8223 Handleiding

23 Augustus 2024
Metra

Metra 99-7422 Handleiding

23 Augustus 2024
Metra

Metra 99-7875 Handleiding

23 Augustus 2024

Handleiding Carkit

Nieuwste handleidingen voor Carkit