Metra 108-TO2CHG Handleiding

Metra Niet gecategoriseerd 108-TO2CHG

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 108-TO2CHG (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 95 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/29/19 INST108-TO2
I N S TA L L AT I O N I N S T R U C T I O N S
108-TO2
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
Patent Pending
KIT FEATURES
• Designed specifically for the Pioneer DMH-C5500NEX 8-inch radio
• 108-TO2B = Painted scratch resistant matte black
• 108-TO2CHG = Painted charcoal high gloss
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Clock/Hazard housing • D) Panel Clips (4) • E) #4 x 3/8” Phillips truss head screws (6)
A B C D
E
Toyota Tacoma 2012-2015
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip, unplug and remove the climate
control panel. (Figure A)
2. Remove (4) 10mm screws securing the
radio assembly. (Figure B)
3. Unclip, unplug, and remove the radio
assembly. (Figure C)
(Figure D)
(Figure E)
4. Remove (8) screws securing the radio
brackets to the radio, then remove the
brackets. (Figure D)
5. Unclip and remove the clock/hazard
assembly from the radio assembly.
(Figure E)
6. Remove (3) panel clips from the radio
assembly.
Continue to Kit Preparation
SCAN
T EXT
PWR VOL
(Figure A)
(Figure B)
(Figure C)
SCAN
T EXT
PWR VOL
REV. 8/29/2019 INST108-TO2 3
KIT PREPARATION KIT ASSEMBLY
1. Attach the clock/hazard housing to the
radio trim panel using (6) #4 x 3/8”
Phillips pan-head screws provided.
WARNING: DO NOT OVERTIGHTEN
THE SCREWS.
2. Clip the clock/hazard assembly into the
radio trim panel. (Figure A)
3. Attach (4) factory panel clips to the
radio trim panel. The middle clip will
not be reused to allow room for the
larger aftermarket radio.
(4) panel clips have been Note:
provided, only if the factory clips are
missing or damaged.
4. Cut the factory dash panel in areas
indicted to allow room for the
aftermarket radio. (Figure B)
Continue to Kit Assembly
(Figure A)
H
M
PASSENGE R PASSENGE R
Insert Clock/Hazard switch assembly from
rear of 108-TO2 radio housing trim panel
Note: For steps 1 and 2, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1. Secure the radio brackets to the radio
chassis using (4) screws supplied with
the radio. (Figure A)
2. Secure the radio display to the radio
brackets using (4) screws supplied with
the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation.
4. Slide the completed radio assembly into
the dash, then secure it using the factory
screws.
5. Re-connect the clock/hazard assembly
back to the vehicle, then clip the radio
trim panel over the radio assembly.
6.
Reassemble the dash in reverse order of
disassembly to complete the installation
.
(Figure A)
(Figure B)
(Figure B)
Remove shaded area

Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 108-TO2CHG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 108-TO2CHG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024