Metra 107-KI1HG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 107-KI1HG (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 5/4/22 INST107-KI1HG
I N S TA L L AT I O N I N S T R U C T I O N S
107-KI1HG
Patent Pending
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
Designed specifically for ISO DDIN radios which have an “L
shaped chassis design, with the radio chassis at the bottom of
the screen like the Alpine iLX-207. Also designed for Pioneer modular
6.8” radios like the DMH-C2550NEX and DMH-C2500NEX.
Both textured and painted gloss black to match the factory finish.
KIT COMPONENTS
A) Radio housing front • B) Radio housing back • C) Pioneer brackets • D) panel clips (2)• E) #8 x 3/8” Phillips screws (4) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
–Bottom chassis DDIN radio provision.................4
–Pioneer modular DDIN radio provision .............5
WIRING & ANTENNA CONNECTIONS
Wiring Harness:
Visit metraonline.com for audio/
video and steering wheel control interface options.
Antenna Adapter: 40-KI11
A CB D E
Kia Seltos 2021-Up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
1. Unclip and remove the trim panel
behind the radio display. (Figure A)
2. Remove the (2) Phillips screws under
trim panel removed in step 1. (Figure B)
(Figure C)(Figure A)
(Figure D)(Figure B)
DASH DISASSEMBLY
3. Unclip and remove the small trim to the
left of the instrument cluster. (Figure C)
4. Remove (1) Phillips screw from behind
small trim panel removed in step 3.
(Figure D)
Continued on the next page
REV. 5/4/2022 INST107-KI1HG 3
DASH DISASSEMBLY (CONT.)
(Figure E) (Figure G)
(Figure F) (Figure H)
5. Unclip and remove the entire trim
surrounding the instrument cluster and
including the a/c vents under the radio
display. (Figure E)
6. Remove (1) Phillips screw securing the
trim panel below the radio display
which had the a/c vents in it then unclip
and remove the panel. (Figure F, G)
7. Remove (2) Phillips screws securing the
radio display and chassis. (Figure H)
8. Unclip unplug and remove the radio
display and chassis.
Continue to Kit Preparation


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 107-KI1HG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 107-KI1HG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Metra

Metra 95-7022HG Handleiding

12 November 2024
Metra

Metra 95-7642 Handleiding

12 November 2024
Metra

Metra 71-017C Handleiding

26 September 2024
Metra

Metra AXSP-HK Handleiding

26 September 2024
Metra

Metra 109-TO7 Handleiding

24 September 2024
Metra

Metra 95-8273B Handleiding

6 September 2024
Metra

Metra 95-7822 Handleiding

6 September 2024
Metra

Metra 82-8703 Handleiding

6 September 2024
Metra

Metra 88-00-9004 Handleiding

6 September 2024
Metra

Metra 82-9101 Handleiding

6 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd