Metabo UB18DDQ4 Handleiding

Metabo Lamp UB18DDQ4

Lees hieronder de 📖 handleiding in het Nederlandse voor Metabo UB18DDQ4 (57 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/57
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
Model
Modèle
Modelo UB 18DD Cordless Work Light
Lampe de Travail Sans Fil
Lámpara de Trabajo Inalámbrica
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this work light can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the work light. Please keep this manual available for other
users and owners before they use the work light. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cette lampe de travail peut entraîner
la mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Veuillez lire et de comprendre ce mode d’emploi AVANT d’utiliser la lampe de travail. Laissez
ce mode d’emploi à la disposition des autres utilisateurs et propriétaires avant utilisation de
la lampe de travail. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE
INSTRUCCIONES
ADVERTENCIA
¡Una utilización INCORRECTA O INSEGURA de esta lámpara de trabajo puede provocar
la muerte o daños corporales importantes!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la lámpara de trabajo. Guarde proporcione este
manual a los demás usuarios y propietarios antes de que utilicen esta lámpara de trabajo.
Este manual debe almacenarse en un lugar seguro.
Without charger and battery
Sans chargeur et batterie
Sin cargador y batería
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction
Manual before operating or maintaining this work light.
Most accidents that result from work light operation and maintenance are caused by the failure to observe
basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections
which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on
the work light and in this Instruction Manual.
NEVER use this work light in a manner that has not been specifi cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate
injury, or may cause machine damage.
NOTE emphasizes essential information.
MEANINGS OF SYMBOLS
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
To reduce the risk of injury, user must
read instruction manual.
—direct currents
alternating current
Do not stare at operating lamp.
Hz hertz
W watts
A amperes
0,5m
Keep the light and the object being
illuminated at least 0.5 m apart. Class II tool
V volts ta ambient temperature
2
English
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS
APPLIANCE)
WARNING
To reduce the risk of fi re, electric shock, or
injury:
1. Use only the AC cord that is included with this
product.
Additionally, this AC cord is only for use with
this product. Do not use this AC cord with other
products.
2. Use only the specifi ed power supply voltage.
3. Do not touch the power plug (AC cord) with wet
hands.
4. Avoid damaging the AC cord.
Do not modify, forcibly bend, twist or pull the
AC cord, place heavy objects on it or place it
near heating appliances.
5. Insert the power plug (AC cord) securely as far
as it will go.
Dust or dirt between the power plug and the
electric socket may lead to fi re. Remove the
power plug periodically and wipe off any dust
or dirt with a dry cloth.
6. Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
7. Use only as described in this manual. Use only
manufacturer’s recommended attachments.
8. Do not use work light in explosive atmospheres,
such as in the presence of fl ammable or
combustible liquids, gasses or dust.
9. Be careful of electrical shock.
10. When not using the work light, or when
inspecting it or performing maintenance on it,
be sure to turn the switch OFF on the unit, and
detach the AC cord and battery.
11. Do not cover the work light with cloth,
cardboards or other materials when the light
is on. Keep the light and the object being
illuminated at least 50 cm apart. Failure to
observe these warnings may result in fi re.
12. When the light is turned on, do not look directly
into it, point it at people or animals, or aim it
toward the eyes.
13. The LED cover will remain at a high temperature
when lit and immediately after use, so do not
touch it.
14. Do not use, leave, or store the work light in the
rain or in humid places.
15. Do not leave the work light in a car or the like
that tends to be exposed to be searching heat
of the sun (above 122°F (50°C)). Otherwise,
troubles can result.
16. Do not leave the work light unattended while it
is turned on.
17. When placing the work light in a high location
for use, ensure that the location is stable.
Additionally, secure it in place with string, etc.
to prevent it from falling.
If it falls, it may result in injury or damage.
18. Do not use the work light if the LED cover is
damaged or detached.
19. Do not charge the unit outdoors.
20. Use only the charger supplied by the
manufacturer to recharge.
21. Do not incinerate the appliance even if it is
severely damaged. The batteries can explode
in a fi re.
22. Do not disassemble or modify the work light.
GENERAL SAFETY RULES
SAVE THESE
INSTRUCTIONS
1) Work area safety
a) Keep work area clean.
Cluttered areas invite accidents.
b) Do not operate work light in explosive
atmospheres, such as in the presence
of fl ammable liquids, gases or dust.
3
English

Product specificaties

Merk: Metabo
Categorie: Lamp
Model: UB18DDQ4

Heb je hulp nodig?

Als je hulp nodig hebt met Metabo UB18DDQ4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Lamp Metabo

Metabo

Metabo UB18DDQ4 Handleiding

27 Februari 2024
Metabo

Metabo ULA 14.4-18 LED Handleiding

29 Januari 2023

Handleiding Lamp

Nieuwste handleidingen voor Lamp

Chauvet

Chauvet WELL POD 2X6 Handleiding

17 December 2024
Makita

Makita MT001 Handleiding

16 December 2024
Ledlenser

Ledlenser ML6 Handleiding

16 December 2024
Ledlenser

Ledlenser ML4 Handleiding

16 December 2024
Ledlenser

Ledlenser H5R Work Handleiding

16 December 2024
Ledlenser

Ledlenser H3.2 Handleiding

16 December 2024
Ledlenser

Ledlenser MH5 Handleiding

16 December 2024
Ledlenser

Ledlenser MH4 Handleiding

16 December 2024
Ledlenser

Ledlenser H7R Work Handleiding

16 December 2024
Ledlenser

Ledlenser H7R Core Handleiding

16 December 2024