Mercusys MS108 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Mercusys MS108 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
12345678
12345678
7107500049 REV1.0.0
For more information, please visit our website:
http://www.mercusys.com
Installation Guide
5/8-Port 10/100Mbps Desktop Switch
* MS108 is used for demonstration in this guide.
Images may dier from actual product.
MS105/MS108
LED Explanation
Connection
LAN PortWAN Port
Router
Internet
PC
Power Cord
PC
Ethernet Ports (1-8)
Power
On: The power is on.
O: The power is o.
Port LEDs (port 1-8)
On: The port is connected.
Blinking: The port is sending or receiving data.
O: The port is not connected.
Certication
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
CE, RoHS
0ËšC~40ËšC (32ËšF~104ËšF)
-40ËšC~70ËšC (-40ËšF~158ËšF)
10%~90% RH non-condensing
5%~90% RH non-condensing
Environmental and Physical Specifications
General Specications
IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
CSMA/CD
5/8 10/100Mbps Auto-Negotiation RJ45 Ports
10BASE-T: UTP category 3, 4, 5 cable
(maximum 100m) EIA/TIA-568 100Ω STP
(maximum 100m)
100BASE-TX: UTP category 5, 5e cable
(maximum 100m) EIA/TIA-568 100Ω STP
(maximum 100m)
Power, Link/Act LEDs
Ethernet:
10Mbps (Half Duplex), 20Mbps (Full Duplex)
Fast Ethernet:
100Mbps (Half Duplex), 200Mbps (Full
Duplex)
Store-and-Forward
Automatically learning, automatically aging
10Base-T: 14880pps/Port
100Base-Tx: 148800pps/Port
10Base-T: 14880pps/Port
100Base-Tx: 148800pps/Port
Standard
Protocol
Interface
Network Media (Cable)
LED Indicators
Data Transfer Rate
Transfer Method
MAC Address Learning
Frame Filter Rate
Frame Foward Rate
It is recommended that you check the following items:
A1: Make sure that the cable connectors are rmly plugged
into the switch and the device.
A2: Make sure the connected device is turned on and working
properly.
A3: The cable must be less than 100 meters long (328 feet).
Q2. The Port LED is o when a device is connected to
the corresponding port.
FAQ (Frequently Asked Questions)
The Power LED should be on when the power system is
working properly. If the Power LED is not on, please check
as follows:
A1: Make sure the power cord is connected to the switch
with power source properly.
A2: Make sure the voltage of the power supply meets the
requirements of the input voltage of the switch.
A3: Make sure the power source is ON.
Q1. The Power LED is o.
COPYRIGHT & TRADEMARKS
Specications are subject to change without notice. is a
registered trademark of MERCUSYS TECHNOLOGIES CO., LIMITED. Other brands
and product names are trademarks or registered trademarks of their respective
holders.
No part of the specications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from MERCUSYS TECHNOLOGIES CO., LIMITED. Copyright ©
2016 MERCUSYS TECHNOLOGIES CO., LIMITED. All rights reserved.
http://www.mercusys.com
SAFETY NOTICES
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
CE Mark Warning
Do not use this product near water,
for example, in a wet basement or near a swimming pool.
Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.
Cautions
Use only power supplies which are provided by manufacturer and in the original
packing of this product. If you have any questions, please don't hesitate to contact us.
©2016 MERCUSYS


Product specificaties

Merk: Mercusys
Categorie: Niet gecategoriseerd
Model: MS108
Kleur van het product: Wit
Breedte: 127 mm
Diepte: 60.2 mm
Hoogte: 22 mm
Gewicht verpakking: 180 g
Breedte verpakking: 132 mm
Diepte verpakking: 80 mm
Hoogte verpakking: 57 mm
Gebruikershandleiding: Ja
Stroombron: DC
LED-indicatoren: Activity, Power
Stroom: 0.4 A
Snelstartgids: Ja
Certificering: RoHS\nCE
Ingangsspanning: 5 V
Netwerkstandaard: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Temperatuur bij opslag: -40 - 70 °C
Luchtvochtigheid bij opslag: 5 - 90 procent
Rack-montage: Nee
Vermogenstoevoer inclusief: Ja
Auto MDI/MDI-X: Ja
Power over Ethernet (PoE): Nee
Stapelbaar: Nee
Switchingcapaciteit: - Gbit/s
MAC-adrestabel: - entries
Switch type: Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten: 8
Netstekker: DC-in ingang
Type basis-switching RJ-45 Ethernet-poorten: Fast Ethernet (10/100)
Jumbo Frames ondersteuning: Ja
Full duplex: Ja
Auto-negotiation: Ja
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Code geharmoniseerd systeem (HS): 85176990
Jumbo frames: 2000
Store-and-forward: Ja
Half-duplex: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Mercusys MS108 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Mercusys

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024