McIntosh C49 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor McIntosh C49 (32 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
C53
Audio Preamplifier
Owner’s Manual
2
Your decision to own this McIntosh C53 Audio Pre-
amplifier ranks you at the very top among discrimi-
nating music listeners. You now have “The Best.” The
McIntosh dedication to “Quality,” is assurance that
you will receive many years of musical enjoyment
from this unit.
Please take a short time to read the information in
this manual. We want you to be as familiar as pos-
sible with all the features and functions of your new
McIntosh.
Copyright 2019 © by McIntosh Laboratory, Inc.
Table of Contents
Thank You
Please Take A Moment
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands
that may be part of your system. If you or your Dealer
wish additional help concerning a suspected problem,
you can receive technical assistance for all McIntosh
products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3512
Fax: 607-724-0549
Customer Service
If it is determined that your McIntosh product is in
need of repair, you can return it to your Dealer. You
can also return it to the McIntosh Laboratory Service
Department. For assistance on factory repair return
procedure, contact the McIntosh Service Department
at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance
claim or future service. The spaces below have been
provided for you to record that information:
Serial Number: _______________________________
Purchase Date: _______________________________
Dealer Name: ________________________________
Safety Instrections ..............................................................
2
(Separate Sheet)..........................Important Additional
............................................Operation Information Guide
Thank You and Please Take a Moment 2
..............................
Technical Assistance and Customer Service 2
......................
Table of Contents ................................................................
2
General Information ...........................................................
3
Trademark and License Information 3 ..................................
Connector and Cable Information ......................................
3
Introduction ........................................................................
4
Performance Features .........................................................
4
Dimensions .........................................................................
5
Installation ..........................................................................
6
Connections:
Rear Panel Connections, Connecting Components .........
7-8
Rear Panel Connections (Separate Sheet) ...................
Mc2B
Connecting Components (Separate Sheets) ...............
Mc1A,
......................................................................... Mc1B, Mc2A
Input Assignment Chart (Separate Sheet) .................
Mc5A,
......................................................................................Mc5B
Remote Control:
HR085 Remote Control Push-buttons ...............................
10
How to use the HR085 Remote Control ............................
11
Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide”
Front Panel:
Front Panel Displays, Controls, Push-buttons
and Jack ..............................................................................
12
Setup:
How to Operate the Setup Mode .......................................
13
Default Settings .................................................................
13
Firmware Version ..............................................................
13
Input Settings .....................................................................
13
Rename Input .....................................................................
14
Output Settings ..................................................................
15
Power Control Triggers 1, 2, 3 and 4 .................................
16 Data Ports........................................................................... 17
Passthru ..............................................................................
17
HDMI (ARC) and (CEC) ...................................................
17
Lip Sync Mode (ARC) .......................................................
18
Digital Gain .......................................................................
18
Comm Port Baud Rate .......................................................
19 Remote Control Codes, IR Sensor .................................... 19
Power Mode, Factory Reset, .............................................
20
Operation:
How to Operate the C53 ....................................................
22
Trim Functions..............................................................22-24
Mute, Equalizer Controls and Fundamental
Frequencies of Acoustical Music ..................................
24-25
Output 1&2, ......................................................................
25
Trim, and Passthru Headphone Jack and
How to make a Recording Optical
and Coaxial Inputs .............................................................
26
USB Input Operation and Driver Installation,
Installing the Software, USB Connection,
Windows Sound Setting ...............................................
27-28
Control Panel Settings, USB Music Playback ...................
28
Reset of Microprocessors ..................................................
28
Additional Information:
Specifications................................................................29-30
Packing Instruction ............................................................
31
3
General Information, Trademark and License Information, and Connector Information
Connector and Cable Information
XLR Connectors
Pin configuration for the XLR Balanced Input and Out-
put Connector. Refer to the diagrams for connections:
PIN 1: Shield/Ground
PIN 2: + Input/Output
PIN 3: - Input/Output
Power Control and Trigger Connectors
The C53 Power Control Out, Trigger and PASSTHRU
Output Jacks send Power On/Off Sig-
nals (+12 volt/0 volt) when connected
to other Components. An additional
connection is for controlling McIn-
tosh Power Amplifiers Output Meters.
A 3.5mm stereo mini phone plug is
used for connection to the Power Control (Trigger) and
PASSTHRU Output.
Note: The Six Foot Cables are available from the McIn-
tosh Parts Department. Part No. 170-202.
Data Port Connectors
The C53 Data Out Ports send Remote
Control Signals to Source Components.
A 3.5mm stereo mini phone plug is
used for connection.
IR IN Port Connectors
The IR IN Port also uses a 3.5mm stereo
mini phone plug and allows the connec-
tion of other brand IR Receivers to the
C53.
RS232 Data Port Cable
The RS232 Data Cable is a 3.5mm stereo mini phone
plug to a subminiature DB 9 connector:
Data
Signal
N/C
Data
Ground
PIN 2 PIN 1
PIN 3
PIN 1 PIN 2
PIN 3
1. Refer to pages 7-8 for component(s) connection to
the C53 Preamplifier.
2. Do not apply AC Power to the C53 and other
Component(s) until they are connected to the C53
so operational malfunctioning does not occur.
3. Balanced and Unbalanced Inputs and Outputs can
be mixed. For example, you may connect signal
sources to Unbalanced Inputs and send signals
from the Balanced Outputs. You can also use Bal-
anced and Unbalanced Outputs simultaneously,
connected to different Power Amplifiers.
4. The C53 internal Digital to Analog Converter Cir-
cuitry is designed to decode PCM, DSD and DTS
Digital Signals. The Coaxial and Optical Digital
Audio Inputs are for PCM Digital Signals, Dolby
Signals and DTS Signals. The C53 also decodes
USB and HDMI (ARC) Digital Signals. Other Digi-
tal Audio Signal Format Types will cause the Audio
Outputs of the C53 to be muted and the Front Panel
Information Display will indicate an error message.
5. The Audio Sound is measured in units called Deci-
bels and “dB” is the abbreviation.
6. The McIntosh C53 is factory configured for imme-
diate use. It can also be customized to complement
the components making up your system. Refer to
the C53 “Setup Mode” starting on page 13 for ad-
ditional information.
7. The Remote Control Supplied with the C53 Pream-
plifier is capable of operating other components.
For additional information go to www.mcintosh-
labs.com.
8. The IR Input is configured for non-McIntosh IR
sensors such as a Xantech Model HL85BK Kit. Use
a Connection Block such as a Xantech Model ZC21
when two or more IR sensors need to be connected
to the C53. The signal from a connected External
General Information
Power
Control
Meter
Illumination
Control Ground
Main, Triggers 1-4
and PASSTHRU
IR Sensor will have priority over the signal from
the Front Panel IR Sensor.
9. For additional information on the C53 and other
McIntosh Products please visit the McIntosh Web
Site at www.mcintoshlabs.com.
IR Data
Control
Ground
N/C
Data In
(DB9-pin2)
Ground
(DB9-pin5)
Data Out
(DB9-pin3)
PIN 1
PIN 6
PIN 5
PIN 9
DB9
(male connector)
The McIntosh C53 incorporates copyright protected
technology that is protected by U.S. patents and other
intellectual property rights. The C53 uses the follow-
ing Technologies:
Trademark License Information
ASIO is a trademark and
software of Steinberg Media
Technologies GmbH
Manufactured under license
from Dolby Laboratories. Dolby,
Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://
patents.dts.com. Manufactured
under license from DTS, Inc.
DTS, the Symbol, DTS and
the Symbol together, and
Digital Surround are registered
trademarks and/or trademarks
of DTS, Inc. in the United
States and/or other countries.
DTS, Inc. All Rights Reserved.
The terms HDMI, HDMI
High-Deî‚żnition Multimedia
Interface, and the HDMI Logo
are trademarks or registered
trademarks of HDMI Licensing
Administrator, Inc.
Trademark and License Information
HIGH-DEFINITION MULTIMEDIA INTERFACE
TM


Product specificaties

Merk: McIntosh
Categorie: Receiver
Model: C49

Vragen van gebruikers

Beste heer - we weten uit een mail dat de mc intosh c49 via een digital optical kabel aangesloten kan worden aan een sony kd 55a1b inzake sound. kunt u finaal ook even uitleggen welk(e) symbool ik aan de voorknop moet draaien vb coax1 = cd - coax2 = blue streamer - unbal3 = cassette speler - mm phono = platenspeler ik geloof dat je me begrijpt. via jouw mogelijke info zou ik het wel halen aansluitend de achterkant van de versterker - moet je de kabel volgens u in : digital audio inputs en daaronder optical2 of optical1 insteken of denkt u usb of audio of mct tot genoegen

  Marc DECKERS - 23 Mei 2023

Heb je hulp nodig?

Als je hulp nodig hebt met McIntosh C49 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver McIntosh

Handleiding Receiver

Nieuwste handleidingen voor Receiver