Maxxus RunMaxx 7.4 Handleiding

Maxxus Loopband RunMaxx 7.4

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Maxxus RunMaxx 7.4 (44 pagina's) in de categorie Loopband. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
ENG
RunMaxx 7.4
Treadmill
I N S TA L L AT I O N & O P E R AT I N G M A N U A L
2
Index
Index 2
Safety Instructions 3
Overall View of the Device 4
Scope of Delivery 4
Assembly 5 – 8
Folding Mechanism 9-10
Transport 10
Mains Connection 11
Safety Distance 11
Disabling Function 11
Safety Key 12
What to do in an Emergency 12
Maintenance & Care 13 – 15
Cockpit 16 – 30
Pulse & Heart Rate 31 – 32
Training Recommendations 33 – 34
Technical Details 35
Disposal 35
Recommended Accessories 35
Exploded Drawing 36 – 37
Spare Parts List 38 – 39
Warranty 42
Service Contract 43
Β© 2019 MAXXUS Group GmbH & Co. KG
All rights reserved / All rights reserved
This publication may not be reproduced, stored in a retrieval system, or transmitted in whole or in part, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise without the prior written permission of Maxxus Group GmbH & Co. KG.
Errors, colour and technical modication subject to change, reproduction as well as electronic duplication only with written permission of MAXX-
US Group GmbH & Co. KG.
3
ENG
Safety Instructions
Before you start exercising, be sure to read the entire operating manual, especially the Safety Information, the Maintenance and Clean-
ing Information and the Training Information. Also make sure that anyone else who uses this training device is familiar with this informa-
tion and observes it.
Always follow the maintenance and safety instructions in this manual very carefully.
This training device may only be used for its specic intended use. Any misuse can cause risk of possible accident, damage to health
or damage to the device for which the Distributor will not assume any liability.
Electrical Connection
βˆ’A mains voltage of 220-230V is required to operate this training device.
βˆ’The training device is only to be connected to the mains with the mains cable supplied using a 16A individually fused and earthed
socket installed by a qualied electrician.
βˆ’ The training device is only to be switched on and o󰀨 using the ON/OFF switch.
βˆ’Always remove the electric plug from the socket before moving the training device.
βˆ’Remove the electric plug from the socket before commencing any cleaning, maintenance or other works.
βˆ’Do not connect the mains plug to a socket on a socket strip or on a cable drum.
βˆ’ If using a cable extension please ensure that this complies with DIN standards, VDE regulations and guidelines, technical rules
issued by other European Union states.
βˆ’Always place the mains cable so it cannot be damaged or cause a tripping hazard.
βˆ’In operating or standby mode, electrical devices such as mobile phones, PCs, Televisions (LCD, plasma, tube, etc.), game con-
soles etc. will emit electro-magnetic radiation. For this reason, all these types of devices should be kept away from your training
device as they could lead to malfunction, disturbances or false outputs being shown in heart rate measurements.
βˆ’For safety reasons, always remove the electrical plug from the socket when the device is not in use.
Training Environment
βˆ’Select a suitable space for your training device to provide an optimum amount of free space and highest level of safety. You
should leave a free space measuring a minimum of 200 cm long and at least the width of the treadmill behind the device. A free
space measuring a minimum of 50cm long and at least the width of the treadmill should be left in front of the device.
βˆ’Make sure that the area is well ventilated and that an optimum amount of oxygen is available during training. Avoid draughts.
βˆ’Your training device is not suitable for outside use and so storage and training can only take place in a temperate, clean dry room.
βˆ’The temperature range to operate or store this device is between a minimum of 10Β° and maximum of 30Β°
βˆ’Do not operate or store your training device in wet areas such as in swimming pools, saunas etc.
βˆ’ Make sure that your training device is kept on at, hard, clean ground both in operation and at rest. Any uneven surfaces must be
removed or made good.
βˆ’ It is recommended that a oor covering (carpet, mat, etc.) should be placed under the device to protect damageable oors such as
wood, laminates, oor tiles etc. Please ensure that this underlay cannot slip or slide.
βˆ’Do not put this training device on pale or white coloured carpets or rugs as the feet of the device may leave marks.
βˆ’Make sure that your training device and mains cable are kept out of contact with hot surfaces and are kept at a safe distance from
any sources of heat e.g. central heating, hot stoves, furnaces, ovens or open res.
Personal Safety Instructions for Training
βˆ’The safety key must be inserted correctly before each training session can begin.
βˆ’Remove the safety key and mains cable from the training device when not in use to avoid inappropriate or uncontrolled use by any
other third party, e.g. children.
βˆ’You should have a health check carried out by your doctor before you start any training
βˆ’ Stop training immediately if you feel physically unwell or are experiencing any breathing di󰀩culties.
βˆ’Always start your training session at a low workload increasing it slowly but steadily throughout. Reduce the workload again to-
wards the end of your training session.
βˆ’Suitable sports shoes and clothes should always be worn during training sessions. Make sure that loose clothes do not get caught
up in the treadmill belt or rollers.
βˆ’Your training device is only to be used by one person at a time.
βˆ’ Check each time before a training session to see if your device is in perfect condition. Never use your training device if it is faulty
or defective.
βˆ’You are only permitted to carry out repairs to the device yourself after having contacted our Service Department and on receipt of
explicit permission to do so. Only original spare parts may be used at any time.
βˆ’Your training device must be cleaned after each use. Remove all dirt including body sweat or any other liquids.
βˆ’Always make sure that liquids (drinks, body sweat, etc.) do not get onto the vibrating plate or into the cockpit as this can cause
damage to the mechanical and electronic components.
βˆ’Your training device is not suitable for use by children.
βˆ’Third parties, especially children and animals, must be kept at an appropriate safety distance during training.
βˆ’ Check if there are any items underneath the training device before each training session and remove them without fail. Never use
the training device when items are underneath it.
βˆ’Do not allow children to use your training device as a toy or climbing frame at any time.
βˆ’Ensure that no body parts of your own or of third parties ever come in contact with any of the moving mechanisms.
Warning for pulse and heart rate measurement
Pulse and heart rate monitoring systems may be inaccurate. Excessive training can lead to serious injury or lead to death. If you feel
unwell and / or faint, you must stop training immediately. Make sure that all persons using this exercise device are familiar with and
understand this information and abide by it without fail.
The construction of this training device is based on state-of-the-art technology and highest modern technical safety standards. This
training device is to be used by adults only! Extreme misuse and/or unplanned training can cause damage to your health!


Product specificaties

Merk: Maxxus
Categorie: Loopband
Model: RunMaxx 7.4

Heb je hulp nodig?

Als je hulp nodig hebt met Maxxus RunMaxx 7.4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Loopband Maxxus

Handleiding Loopband

Nieuwste handleidingen voor Loopband