Maxxus 8.1 Handleiding

Maxxus Roeimachine 8.1

Lees hieronder de 📖 handleiding in het Nederlandse voor Maxxus 8.1 (32 pagina's) in de categorie Roeimachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

ENG

MAXXUS 8.1

Rowing Machine

I N S TA L L AT I O N & O P E R AT I N G M A N U A L

Index

Index 2

Safety Instructions 3

Overview of the Device 4

Fixing Material 4

Assembly 5 – 6

Mains Connection 6

Folding Mechanism 7 – 8

Location & Storage 9

Transport 9

Care & Maintenance 9

Adjusting the Pedals 10

Positioning the Cockpit 10

Rowing Handle Storage 10

Cockpit 11 – 17

Heart & Pulse Rate 18 – 19

Training Instructions 20

Training Recommendations 21 – 22

FAQ 23

Recommended Accessories 24

Technical Details 25

Disposal 25

Exploded Drawing 26

Spare Parts List 27

Warranty 30

Service Contract 31

This publication may not be reproduced, stored in a retrieval system, or transmitted in whole or in part, in any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Maxxus Group

GmbH & Co. KG.

Errors, colour and technical modication subject to change, reproduction as well as electronic duplication only with written

permission of MAXXUS Group GmbH & Co. KG.

ENG

Safety Instructions

Please read and observe all sections of this Operating Manual before you start with training. Thorough attention should

be paid to the safety, cleaning and maintenance instructions and the training information. Please also make sure that

anyone using this device is familiar with all this information.

It is very important to adhere strictly to the safety and maintenance instructions contained in this Manual. This training

device is only to be used for its intended purpose. If this equipment is used for any other purposes than intended, there

is a possible risk of accident, damage to health or damage to the training device for which the Distributor cannot be

held responsible.

Electrical Connection (only applies to devices with an external electrical connection)

−A mains voltage of 220-230V is required to operate this training device.

−The training device is only to be connected to the mains with the mains cable supplied using a 16A individually

fused and earthed socket installed by a qualied electrician.

− The training device is only to be switched on and o󰀨 using the ON/OFF switch.

−Always remove the electric plug from the socket before moving the training device.

−Remove the electric plug from the socket before commencing any cleaning, maintenance or other works.

−Do not connect the mains plug to a socket on a socket strip or on a cable drum.

− If using a cable extension please ensure that this complies with DIN standards, VDE regulations and guidelines,

technical rules issued by other European Union states.

−Always place the mains cable so it cannot be damaged or cause a tripping hazard.

−In operating or standby mode, electrical devices such as mobile phones, PCs, Televisions (LCD, plasma, tube,

etc.), game consoles etc. will emit electro-magnetic radiation. For this reason, all these types of devices should be

kept away from your training device as they could lead to malfunction, disturbances or false outputs being shown

in heart rate measurements.

−For safety reasons, always remove the electrical plug from the socket when the device is not in use.

Training Environment

−Select a suitable space for your training device to provide an optimum amount of free space and highest level of

safety. You should leave a free space of at least 100 cm in front of and behind the device and a minimum of 100

cm to each side of the training device.

−Make sure that the area is well ventilated and that an optimum amount of oxygen is available during training. Avoid

draughts.

−Your training device is not suitable for outside use and so storage and training can only take place in a temperate,

clean dry room.

−Do not operate or store your training device in wet areas such as in swimming pools, saunas etc.

− Make sure that your training device is kept on at, hard, clean ground both in operation and at rest. Any uneven

surfaces must be removed or made good.

− It is recommended that a oor covering (carpet, mat, etc.) should be placed under the device to protect damagea-

ble oors such as wood, laminates, oor tiles etc. Please ensure that this underlay cannot slip or slide.

−Do not put this training device on pale or white coloured carpets or rugs as the feet of the device may leave marks.

−Make sure that your training device and mains cable are kept out of contact with hot surfaces and are kept at a

safe distance from any sources of heat e.g. central heating, hot stoves, furnaces, ovens or open res.

Personal Safety Instructions for Training

−Remove the batteries or mains cable (if present) when the training device is not in use to avoid inappropriate or

uncontrolled use by any other third party, e.g. children.

−You should have a health check carried out by your doctor before you start any training

− Stop training immediately if you feel physically unwell or are experiencing any breathing di󰀩culties.

−Always start your training session at a low workload increasing it slowly but steadily throughout. Reduce the work-

load again towards the end of your training session.

−Suitable sports shoes and clothes should always be worn during training sessions. Make sure that loose clothes

do not get caught up in slide rail or rollers.

−Your training device is only to be used by one person at a time.

− Check each time before a training session to see if your device is in perfect condition. Never use your training

device if it is faulty or defective.

−You are only permitted to carry out repairs to the device yourself after having contacted our Service Department

and on receipt of explicit permission to do so. Only original spare parts may be used at any time.

−Your training device must be cleaned after each use. Remove all dirt including body sweat or any other liquids.

−Always make sure that liquids (drinks, body sweat, etc.) do not get onto the vibrating plate or into the cockpit as

this can cause damage to the mechanical and electronic components.

−Your training device is not suitable for use by children.

−Third parties, especially children and animals, must be kept at an appropriate safety distance during training.

−Check if there are any items underneath the training device before each training session and remove them without

fail. Never use the training device when items are underneath it.

−Do not allow children to use your training device as a toy or climbing frame at any time.

−Ensure that no body parts of your own or of third parties ever come in contact with any of the moving mechanisms.

The construction of this training device is based on state-of-the-art technology and highest modern technical safety

standards. This training device is to be used by adults only! Extreme misuse and/or unplanned training can cause dam-

age to your health!

Product specificaties

Merk:	Maxxus
Categorie:	Roeimachine
Model:	8.1

Heb je hulp nodig?

Als je hulp nodig hebt met Maxxus 8.1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Roeimachine Maxxus

Maxxus 7.4 Handleiding

20 April 2023

Maxxus Oxford AXR Handleiding

18 Februari 2023

Maxxus 8.1 Handleiding

30 Januari 2023

Handleiding Roeimachine

Nieuwste handleidingen voor Roeimachine

Christopeit Vico Handleiding

17 December 2024

York Fitness WR1000 Handleiding

18 November 2024

Christopeit Garda Handleiding

30 September 2024

Skandika Nemo V Hybrid Handleiding

23 September 2024

Skandika Styrke Handleiding

23 September 2024

Prixton Oxford Handleiding

28 Augustus 2024

First Degree Fitness Viking Pro XL Handleiding

21 Augustus 2024

First Degree Fitness Viking Pro V Handleiding

21 Augustus 2024

First Degree Fitness Viking Pro Plus V Handleiding

21 Augustus 2024

First Degree Fitness Apollo Plus Handleiding

21 Augustus 2024