Maxsa 43218 Handleiding
Maxsa
Bewegingsdetector
43218
Lees hieronder de 📖 handleiding in het Nederlandse voor Maxsa 43218 (6 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
Model #: 43218
ASSEMBLY & OPERATING INSTRUCTIONS
ABOUT YOUR DUAL HEAD LED SECURITY SPOTLIGHT
The Dual Head LED Security Spotlight is perfect for porches, doorways, or around the exterior of your home
or business. The 8 super bright LEDs in the Dual Head LED Security Spotlight have an estimated life of
30,000 hours so they should never need changing.
This Dual Head LED Security Spotlight has an adjustable TIME dial that allows light duration of up to 30
seconds. New batteries should last roughly a year with normal usage.
The Dual Head LED Security Spotlight has a built-in motion sensor, which automatically turns on the light
when movement of a heat source (such as people, animals, or cars) is detected in the area. The light
remains on while motion continues to be detected in the area.
The Dual Head LED Security Spotlight has a LUX setting which can be adjusted to control the functioning of
the built-in photosensor so that the light only turns on at night.
The Dual Head LED Security Spotlight requires 3 C cell batteries (not included). The batteries typically
last up to 1 year under normal use. The shorter the time period used, the longer the batteries will last. The
spotlight may function irregularly or not at all at temperatures near or below freezing (2 Ëš F/ Ëš ) due to the 0-6 C
functionality of alkaline batteries. Normal operation will return when the temperature rises.
2
INCLUDED PARTS:
Carefully remove and identify all the parts from their protective packaging and lay them out in front of you.
Adjustment dials are located on the backside of the motion sensor as shown in the pictures below. Rotate
the motion sensor so you have access to the backside of it. This is the side that is opposite of the front,
denoted by an arrow and the word FRONT on the motion sensor.
INSTALLING / REPLACING THE BATTERIES:
When the batteries run out of power, you can replace the batteries with 3 new C-Cell batteries. Follow the
steps below when replacing the battery.
1. Switch the Dual Head LED Security Spotlight to OFF.
2. Remove the Dual Head LED Security Spotlight from its mounted back.
3. Remove the thumbscrew from the bottom of the back of the Dual Head LED Security Spotlight.
a. Gently press on the button on the top of the back of the Dual Head LED Security Spotlight and
pull the light away from the mounting bracket.
b. If replacing old batteries, carefully remove the old batteries from the battery tray by hand and
replace with three (3) new C-Cell batteries. If installing batteries for the î‚¿rst time, just insert
three (3) new C-Cell batteries into the battery tray. Ensure that the new batteries are inserted in
the correct +/- polarity orientation as indicated in the battery compartment.
WARNING: BATTERIES INSTALLED INCORRECTLY COULD POTENTIALLY DAMAGE THE UNIT.
4. Press the Dual Head LED Security Spotlight back into the mounted back until the top button clicks
into place. You will have to press the button down î‚¿rst to get the mount to slide in.
5. Replace the thumb screw in the bottom of the back of the Dual Head LED Security Spotlight.
6. Switch the Dual Head LED Security Spotlight back to AUTO
NOTE: DO NOT DISPOSE OF BATTERIES IN GENERAL HOUSEHOLD TRASH OR INTO A
FIRE SINCE THE BATTERIES MAY EXPLODE. CONSULT YOUR LOCAL REGULATIONS FOR
CORRECT DISPOSAL OF BATTERIES. DO NOT TAKE APART THE BATTERIES SINCE THEY
CONTAIN CORROSIVE CHEMICALS.
3
CHOOSING A LOCATION FOR YOUR DUAL HEAD LED SECURITY SPOTLIGHT:
This Dual Head LED Security Spotlight provides safety and security around your home. It is ideal for lighting
up areas where electricity is not available such as porches, driveways, carports outside, garages and
entrance areas.
When deciding where to mount the light, keep in mind that the motion sensor has a horizontal î‚¿eld of vision
of 130º at a distance of up to 26 feet when the surrounding temperature is 75°F. The outside temperature
will impact the detection distance. As temperatures get colder the motion sensor will become more sensitive
and the range of the motion sensor will increase.
HOW TO INSTALL YOUR DUAL HEAD LED SECURITY SPOTLIGHT:
TOOLS REQUIRED FOR INSTALL:
You only need a Phillips head screwdriver, however if you want to mount into harder surfaces like cement,
concrete, or brick, you will want to pre-drill holes.
Use the included mounting bracket and (2) screws to mount the Dual Head LED Security Spotlight securely
to a wall.
TO INSTALL THE MOUNTING BRACKET:
1. Remove the mounting bracket from the back of the light by unscrewing the
(one) thumb screw and pushing the button at the top of base of the light.
Be careful not to damage the mounting bracket as it also serves as the back of the light and the
battery cover.
2. Align the mounting bracket on the wall and mark the locations of the two holes to be drilled with a
pencil. Remove the mounting bracket from the wall.
3. Drill pilot holes for screws if needed. Screw anchors should be used for cement, brick, or similar
surfaces.
4. Align the mounting bracket on the wall and install the two screws using a screwdriver.
5. Press the Dual Head LED Security Spotlight back into the mounted back until the top button clicks
into place. You will have to press the button down î‚¿rst to get the mount to slide into place.
6. Replace the thumb screw in the base of the back.
Product specificaties
| Merk: | Maxsa |
| Categorie: | Bewegingsdetector |
| Model: | 43218 |
Heb je hulp nodig?
Als je hulp nodig hebt met Maxsa 43218 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewegingsdetector Maxsa
11 September 2024
11 September 2024
Handleiding Bewegingsdetector
- Bewegingsdetector Philips
- Bewegingsdetector Gigaset
- Bewegingsdetector Honeywell
- Bewegingsdetector Abus
- Bewegingsdetector ACME
- Bewegingsdetector Alecto
- Bewegingsdetector Axis
- Bewegingsdetector Berker
- Bewegingsdetector Blaupunkt
- Bewegingsdetector Brinno
- Bewegingsdetector D-Link
- Bewegingsdetector DESQ
- Bewegingsdetector Devolo
- Bewegingsdetector Eaton
- Bewegingsdetector Elgato
- Bewegingsdetector Eminent
- Bewegingsdetector EQ-3
- Bewegingsdetector ESYLUX
- Bewegingsdetector Gira
- Bewegingsdetector Goobay
- Bewegingsdetector Grothe
- Bewegingsdetector Hager
- Bewegingsdetector Hikvision
- Bewegingsdetector HQ
- Bewegingsdetector Iget
- Bewegingsdetector Interlogix
- Bewegingsdetector KlikaanKlikuit
- Bewegingsdetector Kogan
- Bewegingsdetector Konig
- Bewegingsdetector Kopp
- Bewegingsdetector Marmitek
- Bewegingsdetector Nedis
- Bewegingsdetector Niko
- Bewegingsdetector Perel
- Bewegingsdetector Powerfix
- Bewegingsdetector Renkforce
- Bewegingsdetector Satel
- Bewegingsdetector Schneider
- Bewegingsdetector Smartwares
- Bewegingsdetector Somfy
- Bewegingsdetector Steinel
- Bewegingsdetector Suevia
- Bewegingsdetector Theben
- Bewegingsdetector TP Link
- Bewegingsdetector Trust
- Bewegingsdetector V-Tac
- Bewegingsdetector Velleman
- Bewegingsdetector Xavax
- Bewegingsdetector Yale
- Bewegingsdetector Joy-it
- Bewegingsdetector Jung
- Bewegingsdetector Olympia
- Bewegingsdetector Optex
- Bewegingsdetector Orbis
- Bewegingsdetector Schwaiger
- Bewegingsdetector Steren
- Bewegingsdetector Cotech
- Bewegingsdetector Arlo
- Bewegingsdetector Techly
- Bewegingsdetector DSC
- Bewegingsdetector Merten
- Bewegingsdetector Chacon
- Bewegingsdetector Nexa
- Bewegingsdetector Swann
- Bewegingsdetector Vemer
- Bewegingsdetector Fibaro
- Bewegingsdetector GEV
- Bewegingsdetector Lucide
- Bewegingsdetector Massive
- Bewegingsdetector XQ-Lite
- Bewegingsdetector Chamberlain
- Bewegingsdetector IFM
- Bewegingsdetector Dahua Technology
- Bewegingsdetector Speed-Link
- Bewegingsdetector Aqua Joe
- Bewegingsdetector Busch-Jaeger
- Bewegingsdetector EVE
- Bewegingsdetector Wentronic
- Bewegingsdetector EQ3
- Bewegingsdetector Homematic IP
- Bewegingsdetector Extron
- Bewegingsdetector Vernier
- Bewegingsdetector Crestron
- Bewegingsdetector Chuango
- Bewegingsdetector ORNO
- Bewegingsdetector Vimar
- Bewegingsdetector Legrand
- Bewegingsdetector Intertechno
- Bewegingsdetector Inovonics
- Bewegingsdetector Bitron
- Bewegingsdetector InLine
- Bewegingsdetector EtiamPro
- Bewegingsdetector Pentatech
- Bewegingsdetector RAB
- Bewegingsdetector BEA
- Bewegingsdetector Tellur
- Bewegingsdetector Megatron
- Bewegingsdetector Ledvance
- Bewegingsdetector Gewiss
- Bewegingsdetector ALC
- Bewegingsdetector Avigilon
- Bewegingsdetector Pepperl+Fuchs
Nieuwste handleidingen voor Bewegingsdetector
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
8 December 2024
8 December 2024
8 December 2024
5 December 2024