Maxsa 40242 Handleiding

Maxsa Niet gecategoriseerd 40242

Lees hieronder de 📖 handleiding in het Nederlandse voor Maxsa 40242 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

1. To access the battery compartment, twist open the back half

of the light counterclockwise.

2. Remove the battery compartment cover by squeezing the

two tabs on the cover inward. 5. Reassemble the Motion-Activated Anywhere Light by twisting

the back half of the light clockwise tightly to ensure a weather

proof seal.

3.Totally portable and weatherproof.

Perfect outdoors for doors, steps, decks, sheds, garages,

pathways, porches, and anywhere additional light is needed.

Also perfect indoors for hallways, stairways,closets, and

bathrooms.

Built-in motion sensor automatically turns on the light when

movement is detected in the area. The light remains on while

motion continues to be detected in the area.

Built-in photosensor enables the light to only turn on at night.

The 4 super bright LEDs have an estimated life of 30,000 hours,

so they never need changing.

40240, 40241

ANYWHERE LIGHT

motion-activated

ABOUT YOUR MOTION-ACTIVATED ANYWHERE LIGHT

Anywhere

Requires 4 D cell batteries (not included). The batteries typically

last up to 1 year under normal use.

1. In order to mount the light securely to a wall or other stable

surfaces, the mounting base needs to be installed. Slide the

the mounting place to separate it from the main body.

2. If you are installing the mounting place on a very hard

surface, you may need to drill holes for the screws first.

The included screw anchors can be used for drywall,

cement, brick, or similar surfaces.

3. Use the two screws supplied to install the mounting plate.

1. Align the base to the mounting plate. Slide the main body

onto the mounting plate until it snaps into place.

At night, the LED lights will remain on for approximately 40

seconds after the last detected movement. If a movement is

detected while the lights are on, the light duration will be reset

and remain on for another 40 seconds.

Depending on your preferences, you can rotate the base on

the mounting plate or make the motion sensor and the light

swivel to aim at different directions.

because

25 feet

fresh

Anywhere

approx. 40 seconds

v10.1

2010

info@maxsainnovations.com

Product specificaties

Merk:	Maxsa
Categorie:	Niet gecategoriseerd
Model:	40242
Kleur van het product:	Brons
Aantal lampen:	4 gloeilamp(en)
Type lamp:	LED
Internationale veiligheidscode (IP):	IP44
Type stroombron:	Batterij/Accu
Ondersteund aantal accu's/batterijen:	4
Geschikt voor buitengebruik:	Ja
Geschikt voor gebruik binnen:	Ja
Compatibele batterij grootte:	D
Maximale wattage van vervangende lamp:	0.72 W
Voltage lamp:	6 V
Geschikte locatie:	Bathroom, Toilet
Batterijtechnologie:	Alkaline