Maruyama MD830 Handleiding

Maruyama Niet gecategoriseerd MD830

Lees hieronder de 📖 handleiding in het Nederlandse voor Maruyama MD830 (34 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/34

L i s e z e t a s s i m i l e z l a t o t a l i t é d e c e m a n u e l a v a n t d ' u t i l i s e r c e t a p p a r e i l .

L e a y e n t i e n d a e s t e m a n u a l a f o n d o , a n t e s d e u s a r e s t e a p a r a t o .

— 1 —

English

TABLE OF CONTENTS

FOREWORD

This Owner’s/Operator’s Manual is designed to familiarize the operator with the various features

and component parts of the equipment and to assist you with the assembly, operation and

maintenance of your new Backpack Blower.

It is essential that any operator of this Backpack Blower product reads and understands the

contents of this manual before using the Backpack Blower.

Important safety instructions will be identified by the following safety symbol:

Failure to comply with the instructions in this manual may result in serious injury or death.

For additional assistance, contact any local authorized Maruyama dealer or Maruyama U.S., Inc.,

4770 Mercantile Drive, suite100, Fort Worth, TX 76137 U.S.A.

phone : 940-383-7400

web : www.maruyama-us.com

MANUAL SAFETY SYMBOLS

Throughout this manual and on the product itself, you will find safety alerts and helpful, information

message preceded by symbols or key words. The following is an explanation of those symbols and

key words and what they mean to you.

Warning label

• Always remove dirt or mud to make the indications legible.

• The following alarm labels are attached.

Alarm label

Foreword ··························································1 Name of each part ···········································8

Safety symbols·················································1 Operating instructions····································11

Warning label ·················································· 1 Regular maintenance···································· 13

Warranty·························································· 4 Storage···························································15

Specifications ·················································· 7 Emission control information························· 15

Assembly parts ················································7

This symbol accompanied by the words WARNING and

DANGER calls attention to an act or condition that can lead

to serious personal injury to operator and bystanders.

Read Owner's/Operator's Manual thoroughly.

Make sure you read the Owner's/Operator's

Manual thoroughly prior to use.

Wear a protector.

Wear protectors such as hat, safety

glasses, ear plugs during work.

Cautions for high temperatures

Muer of engine, n of cylinder, etc. are at

high temperatures. Don't touch them.

Prohibition of re

Don't put a naked flame close to a place

where supplying fuel or doing maintenance.

Cautions for exhaust gas.

Take care not to breathe in exhaust gas

from the engine.

English

— 2 —

Limited Warranty Statement

All Maruyama commercial/ industrial products are warranted to the original purchaser to be free from

defects in material and workmanship for the time periods listed as follows:from the date of purchase

Lifetime for inner drive shaft on trimmers and brushcutters and all ignition modules.

5 years for Commercial and Residential use.

1 year for Rental use.

All Maruyama engines and Kawasaki TK45/TK65 are covered exclusively for five years of

industrial, commercial, institutional, and income producing use. These engines are warranted for

one year of rental use.

This warranty will be in full effect provided the engine is operated for the initial 80 hour

optimization period using Maruyama Premium 2-Cycle oil. After the optimization period the

engine should always be run with either Maruyama Premium 2-Cycle oil or equivalent ISO-L-

EGD & JASO FC 2-Cycle oil.

Any part of a Maruyama product found to be defective within the applicable warranty period shall, at

Maruyama's option, be repaired or replaced without charge. Warranty consideration is obtained by

delivering any Maruyama product believed to be defective to an Authorized Maruyama Servicing Dealer

within the applicable warranty period.

The purchaser shall not be charged for diagnostic labor that leads to the determination that a warranted

part is defective, if the diagnostic work is performed at a Maruyama Dealer.

Any warranted part which is not scheduled for replacement as required maintenance, or which is

scheduled only for regular inspection to the effect of "repair or replace as necessary" shall be warranted

for the warranty period. Any warranted part, which is scheduled for replacement as, required maintenance

shall be warranted for the period of time up to the first scheduled replacement point for that part.

Maruyama Mfg. Co., Inc. is liable for damages to other engine components caused by the failure of a

warranted part still under warranty.

The purchaser is responsible for the performance of the required maintenance, as defined by Maruyama

Mfg. Co., Inc. in the Owner's/Operator's Manual.

EMISSION-RELATED PARTS WARRANTY: In addition to the above warranty coverage, Maruyama

Mfg. Co., Inc. will repair or replace, free of charge, for the original purchaser and each subsequent

purchaser any emission-related part or parts found to be defective in material and workmanship for two

(2) years from original retail delivery date except catalytic converter. Catalytic converter is warranted

one year from original retail delivery date. Emission-related parts are the carburetor assembly, the

ignition coil assembly, the ignition rotor, the spark plug, the catalytic converter and the

fuel tank. Any replacement part that is equivalent in performance and durability may be used

in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of Maruyama Mfg.

Co., Inc.

This warranty does not cover the following:

1. Maintenance items (excluding defects in materials and workmanship) including hoses, spark plugs,

starter rope, air and fuel filters, clutch shoes, vibration isolators, throttle cables and all cutting

attachments, etc.

2. Extra expenses including shipping and handling, travel, payment for lost time or pay and for any

inconvenience and storage.

3. Alterations or modifications including aftermarket parts not authorized by Maruyama U.S., Inc.

4. Wear, accident, abuse, neglect, misuse, negligence, improper fuels, lubricants, fuel mixtures (when

applicable), or failure to operate or maintain the product in accordance with instructions approved by

Maruyama, repair or replacement as provided under this warranty is the exclusive remedy of the

consumer.

Product specificaties

Merk:	Maruyama
Categorie:	Niet gecategoriseerd
Model:	MD830

Heb je hulp nodig?

Als je hulp nodig hebt met Maruyama MD830 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Maruyama

Maruyama S80 PRO Handleiding

8 Augustus 2024

Maruyama MX404 Handleiding

8 Augustus 2024

Maruyama MX401 Handleiding

8 Augustus 2024

Maruyama MM92 Handleiding

8 Augustus 2024

Maruyama MM91 Handleiding

8 Augustus 2024

Maruyama MD830 Handleiding

8 Augustus 2024

Maruyama MS0735W Handleiding

8 Augustus 2024

Maruyama MS40V Handleiding

8 Augustus 2024

Maruyama PS300 Handleiding

8 Augustus 2024

Maruyama MS40Li Handleiding

8 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024

Sabrent SB-HTSS Handleiding

21 December 2024