Martin RoboScan 804 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Martin RoboScan 804 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 206 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
ROBOSCAN 804/805
USERS GUIDE
Table Of Contents
INTRODUCTION .................................... 3
HOW TO INSTALL THE ROBOSCAN . . . . . . . . . . . . . . . . . . . . . 3
OPERATING WITH A CONTROLLER . . . . . . . . . . . . . . . . . . . . . 4
SETTING THE OPERATING ADDRESS OF EACH ROBOSCAN . . 4
OPERATING WITHOUT A CONTROLLER (STAND ALONE) . . . . 4
DIP SWITCH SETTING TABLES . . . . . . . . . . . . . . . . . . . . . . . . . 5
TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . 5
Page 2
INTRODUCTION
The RoboScan 804/805 is a high-performance, intelligent spotlight which
features :
High quality stepper motors
4 dichroic colors, plus white
The RoboScan 804 has 8 manually selectable gobos
The RoboScan 805 has motorized gobos featuring 5 dierent patterns.
Precision optics
Adjustable focus
180 degree pan and 90 degree tilt
150 watt halogen lamp
Ecient fan cooling
Can be controlled by Martin 2501 (32 pcs.), 2308 (8 pcs.), 2032 (32
pcs.), 3032 (96 pcs.)
Can be controlled by DMX 512 via Martin Interface.
Can run without controller using built-in random-sequence programmes
with and without music trig. (Stand alone)
Built-in microphone for music triggering.
Built-in variable speed control.
HOW TO INSTALL THE ROBOSCAN
Before opening the RoboScan 804/805 be sure to position the mirror
as shown in gure 1. Failure to do this can result in damage to the
mirror.
Remove the 4 knurled screws as shown in gure 2 pull out the
RoboScan 804/805 chassis, as shown in to gure 3. The lamp can
now be installed. On the RoboScan 804 the desired gobo can be
selected by turning the gobo wheel.
Check the mains voltage on the power supply board (see gure 4):
USA/Canada 110 / 115 / 120V - 60 Hz.
Europe 220 / 230 / 240V - 50 Hz.
If the lamp-life is shorter than expected you can set the voltage to a
higher value. This reduces the voltage applied to the lamp.
Push the RoboScan 804/805 chassis back into place and tighten the
screws.
Mount the RoboScan 804/805, without fully tightening the clamps.
Remove the transport xture from the mirror.
Page 3


Product specificaties

Merk: Martin
Categorie: Niet gecategoriseerd
Model: RoboScan 804

Heb je hulp nodig?

Als je hulp nodig hebt met Martin RoboScan 804 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Martin

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd