Martin Mach TX112 MKII Handleiding

Martin Niet gecategoriseerd Mach TX112 MKII

Lees hieronder de 📖 handleiding in het Nederlandse voor Martin Mach TX112 MKII (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
TX Series
user manual
© 2000 Martin Professional A/S, Denmark.
All rights reserved. No part of this manual may be
reproduced, in any form or by any means, without
permission in writing from Martin Professional A/S,
Denmark.
Printed in Denmark.
3
D E S I G N C O N C E P T
The TX line from Mach is a complete series of professional speakers that borrows may design
features from the larger Mach speakers. The speakers in the TX line deliver clean, loud, and
dynamic sound in a rugged, easy to handle package.
Features include a heavy 1.5 mm steel grill with maximum air-to-metal ratio, protective metal
corners and integrated handles. The cabinets are made of high quality MDF that is highly
resistant to humidity and include excellent inner damping for improved clarity.
The top-boxes are easily placed in arrays due to their 15° trapezoidal shape. They feature our
customized 1" compression driver with a specially designed 90° x 40° horn, which utilizes the
WaveShaper technology from the larger Mach models, ensuring excellent dispersion control
and clarity. All TX models feature a professional Speakon terminal with link option.
For additional sub-bass output, the speakers in the TX line can be supported by the TXS18, a
reflex loaded subwoofer with stackable corners and integrated high-pass filter. The high-pass
filter enables you to operate two subs and top-boxes with one amplifier. When connecting the
TX12F or 15F through the high-pass output, the top-box woofer is protected against over-
excursion.
The TXS18 also features an integrated aluminium top-hat adapter that enables you to place the
TX12F or TX15F above the subwoofer with a speaker pole (P/N 93943004).
CO N N E C T I O N S
All models in the TX line are connected through the 1+ / 1- pins on the Speakon terminal. For
correct polarity, connect the red (+) terminal on the amplifier to 1+ on the speaker. Likewise,
connect the black (-) terminal on the amplifier to 1- on the speaker. If one speaker is operated
with reverse signal polarity, the result is a strong decrease in bass output and lack of focus in the
mid/high frequencies.
When using the high-pass output from the sub-woofer, simply link from the high-pass output on
the sub to the input on the speaker. Pin configuration is stated on the label. Please refer to the
recommended amplifier sizes in the specifications on the last page. Do not connect the
subwoofer high-pass output to the amplifier output, as this will cause damage to the amplifier.
All models feature a Speakon speaker terminal with link option. This option allows two or more
speakers to be operated in parallel from one amplifier.
When using the link output option, be aware that impedance drops with each additional speaker
connected through the link terminal. The impedance is 4 ohm when two TX top-boxes are
operated in parallel and approximately 2.5 ohm when three are operated in parallel. Always
check the recommended minimum load of the amplifier.


Product specificaties

Merk: Martin
Categorie: Niet gecategoriseerd
Model: Mach TX112 MKII

Heb je hulp nodig?

Als je hulp nodig hebt met Martin Mach TX112 MKII stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Martin

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024