Martin DMX Switch Pack Handleiding

Martin Niet gecategoriseerd DMX Switch Pack

Lees hieronder de 📖 handleiding in het Nederlandse voor Martin DMX Switch Pack (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
DMX Switch Pack
user manual
© 1998 - 2006 Martin Professional A/S, Denmark.
All rights reserved. No part of this manual may be
reproduced, in any form or by any means, without
permission in writing from Martin Professional A/S,
Denmark.
Printed in Denmark.
P/N 35000010 Rev.D
3User Manual
Thank you for selecting the Martin DMX Switch Pack. This DMX-controlled switching
device allows you to turn on and off up to six 350 watt devices with the Martin 2518 DMX
Controller or any other DMX board. It allows you to control non-intelligent lights; and is
ideal for combining fixtures from Martin’s DJ Series with intelligent lights.
The DMX Switch Pack is not suitable for switching products with discharge lamps (prod-
ucts with fluorescent tubes or metal halide lamps).
The DMX Switch Pack is ruggedly built for years of trouble-free use. Setup and operation
are simple; please read this manual before setting up and operating the device.
S a f e t y i n f o r m a t i o n
W A R N I N G !
This product presents risks of lethal or severe injury.
This product is for professional use only. It is not for household use. Read this manual
before powering or installing the fixture, follow the safety precautions listed below and
observe all warnings in this manual and printed on the fixture. If you have questions about
how to operate the fixture safely, please contact your Martin dealer or call the Martin 24-
hour service hotline at +45 70 200 201.
To p r o t e ct yo u r s e l f a n d o t h e r s f ro m e l e c t r i c s h o c k
Disconnect the fixture from AC power before removing or installing fuses or any part,
and when not in use.
Always ground (earth) the fixture electrically.
Use only a source of AC power that complies with local building and electrical codes
and has both overload and ground-fault protection.
Do not expose the fixture to rain or moisture.
Refer all service to a qualified technician.
Never operate the fixture with missing or damaged covers.
To p r o t e ct yo u r s e l f a n d o t h e r s f ro m b u r n s a n d f i r e
Never use the device to power fixtures that exceed the specified maximum load.
Never attempt to bypass the fuses.
Always replace defective fuses with ones of the specified type and rating.
Do not modify the fixture or install other than genuine Martin parts.
To p r o t e c t yo u r s e l f a n d o t h e r s f r o m i n j u r y d u e t o f a l l s
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.
Secure the device with a safety wire threaded through the side holes.
Block access below the work area whenever installing or removing the fixture.


Product specificaties

Merk: Martin
Categorie: Niet gecategoriseerd
Model: DMX Switch Pack

Heb je hulp nodig?

Als je hulp nodig hebt met Martin DMX Switch Pack stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Martin

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024