Marmitek WPR 400 Handleiding

Marmitek Niet gecategoriseerd WPR 400

Lees hieronder de 📖 handleiding in het Nederlandse voor Marmitek WPR 400 (26 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/26

WPR 400

Wireless presentation

remote

Easily navigate through your slides

and highlight details on the screen

- air mouse

- magnify function

- built-in battery

- Windows/Mac

user guide

Set content

1 x WPR 400 remote

1 x WPR 400 receiver

1 x sleeve

1 x USB-C power cable

Professional

Safety Instructions

Please read these instructions thoroughly before you use the device and

keep them for future reference.

 Only for indoor use.

 Do not use the product in a damp environment or near water.

 Do not expose the product to extremely high or low temperatures,

strong light sources or direct sunlight.

 This product is not a toy. Keep out of reach of children.

 The built-in rechargeable battery is not replaceable. Do not remove or

replace the battery. Dispose of unit properly. Do not dispose unit in

trash or fire.

 Never open the product: the device may contain parts with deadly

voltage.

 Repairs or service should only be performed by qualified personnel.

 Improper use, self installed modifications or repairs will void any and all -

warranties.

 Marmitek does not accept any product responsibility for incorrect use of

the product or use other than for which the product is intended.

 Marmitek does not accept liability for any consequential damage other

than the legal product responsibility.

Setup

Before using the , please charge the device for 1 WPR 400 for the first time

hour with the included USB C charging cable.-

1. Plug one end of the USB cable into charger (or into the USB port of a a

computer).

2. Plug the other end of the cable into the USB port on your -C WPR . 400

Note: The LED indicator will slowly blink red while charging. When the

battery is full, the LED indicator . will turn off

After charging, remove the charging cable and insert either the USB-A or

USB-C side of the receiver into an available USB port of your PC.-

The WPR 400 requires software in order to use the highlight, magnify and

digital pointer functionality on screen Download the. software from

www.marmitek.com/pages/software and install on your windows or

macOS PC. The ‘Marmitek presenter’ software does not gather or save

any information regarding you or the device it is installed on.

Starting the WPR400

To start switch the mode switchusing the device, (1) vto either ideo (VID)

or presentation ( ) PPT mode. While starting, the indicator will blink green

for a time. After the indicator goes off the connection made to the , is

receiver.

Presentation m ode

Presentation mode (PPT) should be enabled when you are presenting a

slideshow. Beside some buttons that will only work during a presentation,

there are also buttons that work outside the presentation.

1. Mode switch: Switch between ‘OFF’, ‘VID’ and ‘PPT’ for the mode you

want to use.

2. Highlight pointer button: /magnify/digital Press and hold the button

to have the highlight, magnify or on screen. After digital point er

releasing the button, the effect will freeze on screen until the button is

pressed again. Double press the button to switch between highlight,

magnif and digital pointerier . This button works during and outside of

your presentation.

3. Previous button: slide Sends you to the previous in your presentation.

4. Next button: Sends you to the next slide in your presentation.

5. Start/stop and black screen button: While in the presentation edit

screen, press once to start the presentation. During the presentation,

press once to turn the screen black. Press again to show the

presentation again. Double press the button to stop presenting.

6. Air mouse and annotation button: The WPR 400 supports air mouse.

Press the button once to start air mouse mode and move the presenter

to move the cursor on screen. In this mode, the previous(3) and next(4)

button changes function to left and right click respectively. Press the

button once again to quit air mouse mode.

In a presentation, you can start annotation mode by double pressing

the button. This will change the cursor in a dot. In annotation mode, to

press and hold the button to make notes on screen ouble press the . D

button in annotation mode to remove all notes. To quit out of annotation

mode, deactivate air mouse mode by single pressing the air mouse

button.*

7. Volume +: Increases the volume of the PC. holding the highlight e Whil

button, this button also enlarges the circle on screen. This button works

during and outside of your presentation.

8. Volume - : Lowers the volume of the PC. holding the highlight e Whil

button, this button also shrinks the circle on screen. This button works

during and outside of your presentation.

*note: not all presentation programs support s annotation mode Check the .

user guide of your software to see if annotation is supported.

Video mode

Video mode (VID) should be enabled when you are playing media on the

screen. Beside some buttons that will only work , there while watching media

are also buttons that work outside the media player.

1. Mode switch: Switch between ‘OFF’, ‘VID’ and ‘PPT’ for the

mode you want to use.

2. Highlight/ pointer button: magnify/digital Press and hold the button

to have the highlight, magnify or digital point er on screen. After

releasing the button, the effect will freeze on screen until the button is

pressed again. Double press the button to switch between highlight,

magnif and digital pointerier . This button works while in a media player

and outside of the program.

3. Previous button: Skips backwards media playlist.through your

4. Next button: Skips forward through your playlist.media

5. Start/stop and mute button: Single press the button to start or stop

your video. Double press the button to mute or unmute the audio of the

PC.

Product specificaties

Merk:	Marmitek
Categorie:	Niet gecategoriseerd
Model:	WPR 400

Heb je hulp nodig?

Als je hulp nodig hebt met Marmitek WPR 400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Marmitek

Marmitek Cam 4K Pro Handleiding

25 Juni 2024

Marmitek WPR 400 Handleiding

25 Juni 2024

Marmitek Glow MI Handleiding

7 Juli 2023

Marmitek Split 422 Handleiding

19 Juni 2023

Marmitek Split 412 Handleiding

13 Juni 2023

Marmitek AMM31 Handleiding

7 Juni 2023

Marmitek DAIX12 Handleiding

6 Juni 2023

Marmitek Speaker Anywhere 352 Handleiding

3 Juni 2023

Marmitek SAX4 Handleiding

3 Juni 2023

Marmitek DoorGuard 400 Handleiding

3 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024

Bosch KSZ2AVU00 Handleiding

22 November 2024