Marmitek LM12W Handleiding

Marmitek Niet gecategoriseerd LM12W

Lees hieronder de 📖 handleiding in het Nederlandse voor Marmitek LM12W (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

LM12

LAMP MODULE

20135/20070403 • LM12TM LAMP MODULE

LM12

LAMP MODULE

USER MANUAL 2

GEBRAUCHSANLEITUNG 5

GUIDE UTILISATEUR 8

MODO DE EMPLEO 11

MANUALE D’ISTRUZIONI 14

GEBRUIKSAANWIJZING 18

2© MARMITEK

USER MANUAL LM12 LAMP MODULE

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces.

Do not expose the components to rain or moisture. Do not use the product close to a bath,

swimming pool etc.

• Do not expose the components of your systems to extremely high temperatures or bright

light sources.

• Do not open the product: the device contains live parts. The product should only be

repaired or serviced by a qualified repairman.

• In case of improper usage or if you have opened, altered and repaired the product yourself,

all guarantees expire. Marmitek does not accept responsibility in the case of improper usage

of the product or when the product is used for purposes other than specified. Marmitek

does not accept responsibility for additional damage other than covered by the legal

product responsibility.

• Adapters: Only connect the adapter to the mains after checking whether the mains voltage

is the same as the values on the identification tags. Never connect an adapter or power cord

when it is damaged. In that case, contact your supplier.

• Automatic switching devices provide comfort, but can also be dangerous. They can surprise

people or can ignite clothing hanging over an electric heat source. Please be careful and take

appropriate measures to avoid accidents.

How does Marmitek X-10 work?

Marmitek X-10 components use the existing mains wiring to communicate (using Marmitek X-

10 signals). You can build a complete system using the three different kind of components of

the Marmitek X-10 System:

1. Modules: These components will receive Marmitek X-10 signals and will switch or dim

the attached lamp or appliance.

2. Controllers: These components will transmit Marmitek X-10 signals and thus will control

the Modules.

3. Transmitters: Wireless components like remotes. The signals of these components will be

received by a controller with transceiver functionality (IRRF 7243, TM13 or

console of a Marmitek Security System). The Transceiver will translate the

signals into Marmitek X-10 signals on the power line.

Addresses

You can select up to 256 addresses by setting two code wheels on the modules. The two code

wheels are dividing the address into a House Code ( A .. P) and a Unit Code (1 .. 16). On

Controllers the House Code is also selectable. When Modules and Controllers are set to the

same House Code they will work together.

The Marmitek X-10 System contains many standardized commands whereby modules set to the

same House Code will respond simultaneously (e.g. All lights on, all off).

Signal Range

Range of Marmitek X-10 signals over the Power Line and how to increase the range.

The Marmitek X-10 System is based on power line communication. The range of the

Marmitek X-10 signals very much depends on the local circumstances. On average the range

is a cable length of 80 meters.

ENGLISH

3LM12TM

If you have difficulties with the range of your Marmitek X-10 signals, please pay

attention to the following facts:

1. When more than one phase is used for your electrical system, it is necessary to couple

these phases for the Marmitek X-10 signals. For coupling you can use FD10 Phase

Couplers/Filters. You only need to install a Phase Coupler/Filter when your wall outlets and

light switches are divided over more than one phase (more than one group is no problem).

For bigger buildings or longer distances we advice you to use an active repeater instead of

passive FD10’s.

2. It is possible that Marmitek X-10 signals are attenuated by devices and lights which are

connected to the power line. In a normal home situation this effect is negligible (the

Marmitek X-10 system is using active gain control to eliminate the effects). However, it is pos-

sible that a particular device in your house is attenuating the signals so much that the range

of Marmitek X-10 signals is decreased significantly. When you have range problems, it is wise

to try to locate the device which is attenuating the signals simply by unplugging devices from

the power line, and testing the differences in range for your Marmitek system. When e.g.

your conclusion is that e.g. your computer monitor is attenuating the signal, you can use a

FM10 Plug-in Filter between the power line and the monitor to eliminate the effects.

Known devices which can cause attenuation are:

PC Monitors

PC’s with heavy internal power supplies

Old Televisions

Copiers

Fluorescent Lights

Gas Discharge Lamps (Energy Saving Lamps)

3. Some (old) devices are able to disturb the signal by transmitting noise on the power line.

Because the Marmitek X-10 signals are transmitted on 120 kHz, only noise on or near this fre-

quency will have influence on the range. When you use a FM10 Filter to connect this device

to the power line, the noise will be filtered.

4. The Marmitek X-10 protocol has several mechanism to avoid modules to be switched on or

off by other sources than your Marmitek X-10 Controllers. However, it is possible that the

Marmitek X-10 signals are disturbed by e.g. baby phones which are in TALK mode (continu-

ous transmission). When these kind of signals are present on the power line it is possible that

the Marmitek X-10 signals will not come through.

5. The mains do not stop at the front door of your home. Everything that is attached to

mains nearby your home can have influence on Marmitek X-10 signals (e.g. heavy machinery).

If you think that your system is influenced by devices out of your house, it is advisable to

install FD10 Phase Coupler/Filter on each phase entering the house. These filters will block

signals coming into or going out of your house, but will also match the impedance for the

mains. The FD10’s will not only filter but will also couple the phases (please see 1).

FAQ

What is the reason for modules to switch on/off spontaneously?

It is possible that a Marmitek X-10 System is installed at one of your neighbours using the

same House Code. To solve this problem try to change the House Code of your system, or

have FD10 Phase Coupler/Filter installed at your incoming mains.

Product specificaties

Merk:	Marmitek
Categorie:	Niet gecategoriseerd
Model:	LM12W

Heb je hulp nodig?

Als je hulp nodig hebt met Marmitek LM12W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Marmitek

Marmitek Cam 4K Pro Handleiding

25 Juni 2024

Marmitek WPR 400 Handleiding

25 Juni 2024

Marmitek Glow MI Handleiding

7 Juli 2023

Marmitek Split 422 Handleiding

19 Juni 2023

Marmitek Split 412 Handleiding

13 Juni 2023

Marmitek AMM31 Handleiding

7 Juni 2023

Marmitek DAIX12 Handleiding

6 Juni 2023

Marmitek Speaker Anywhere 352 Handleiding

3 Juni 2023

Marmitek SAX4 Handleiding

3 Juni 2023

Marmitek DoorGuard 400 Handleiding

3 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic NB-W250 Handleiding

25 November 2024

Alpine CHM-S611 Handleiding

25 November 2024

AOpen DE3650-C Handleiding

25 November 2024

Lazer Urbanize MIPS Handleiding

25 November 2024

Symmons Dia 353GB-24 Handleiding

25 November 2024

SoundTube IPD-RS62-EZ Handleiding

25 November 2024

Moen Camerist 4905 Handleiding

25 November 2024

Lazer Cameleon DLX Handleiding

25 November 2024

DMT DLD-85 Handleiding

25 November 2024

AOpen AM1120T Handleiding

25 November 2024