Makita UH004GZ Handleiding

Makita Heggenschaar UH004GZ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita UH004GZ (20 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

INSTRUCTION MANUAL

Cordless Hedge Trimmer

UH004G

UH005G

UH006G

UH007G

UH008G

UH009G

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: UH004G UH005G UH006G

Blade length 600 mm 750 mm 600 mm

Strokes per minute 2,000 / 3,600 / 5,000 min

-1 2,000 / 3,000 /

4,000 min-1

Overall length 1,120 mm 1,263 mm 1,123 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 4.3 - 4.9 kg 4.5 - 5.1 kg 4.4 - 5.0 kg

Protection degree IPX4

Model: UH007G UH008G UH009G

Blade length 750 mm 600 mm 750 mm

Strokes per minute 2,000 / 3,000 /

4,000 min-1 2,000 / 3,600 / 5,000 min

-1

Overall length 1,274 mm 1,120 mm 1,262 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 4.6 - 5.2 kg 4.3 - 4.9 kg 4.4 - 5.0 kg

Protection degree IPX4

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL4020* / BL4025* / BL4040* / BL4050F

*:Recommendedbattery

Charger DC40RA / DC40RB / DC40RC

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Recommended portable power pack

Portable power pack PDC1200 / PDC01

• Theportablepowerpack(s)listedabovemaynotbeavailabledependingonyourregionofresidence.

• Beforeusingtheportablepowerpack,readinstructionandcautionarymarkingsontheportablepowerpack.

Symbols

Thefollowingsshowthesymbolswhichmaybeused

fortheequipment.Besurethatyouunderstandtheir

meaning before use.

Read instruction manual.

Weareyeprotection.

DANGER-Keephandsawayfromblade.

Ni-MH

Li-ion

OnlyforEUcountries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

andbatteriesmayhaveanegativeimpact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive

on waste electrical and electronic equipment

and on accumulators and batteries and

waste accumulators and batteries, as well as

their adaptation to national law, waste elec-

trical equipment, batteries and accumulators

shouldbestoredseparatelyanddelivered

to a separate collection point for municipal

waste, operating in accordance with the

regulations on environmental protection.

Thisisindicatedbythesymbolofthe

crossed-out wheeled bin placed on the

equipment.

3 ENGLISH

Intended use

The tool is intended for trimming hedges.

Noise

Applicable standard : EN62841-4-2

Model Sound pressure level Sound power level

LpA(dB(A)) UncertaintyK

(dB(A))

LWA(dB(A)) UncertaintyK

(dB(A))

UH004G 85 963 3

UH005G 86 973 3

UH006G 81 923 3

UH007G 81 923 3

UH008G 82 933 3

UH009G 83 943 3

NOTE:Thedeclarednoiseemissionvalue(s)hasbeenmeasuredinaccordancewithastandardtestmethodand

maybeusedforcomparingonetoolwithanother.

NOTE:Thedeclarednoiseemissionvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)determinedaccordingtoEN62841-4-2:

Model Front handle Rear handle

ah (m/s2) Uncertainty K

(m/s2)

ah (m/s2) Uncertainty K

(m/s2)

UH004G 2.9 1.5 1.52.5 or less

UH005G 3.1 1.5 2.7 1.5

UH006G 3.0 1.5 1.52.5 or less

UH007G 3.4 1.5 3.1 1.5

UH008G 3.1 1.5 1.52.5 or less

UH009G 3.2 1.5 2.5 1.5

NOTE:Thedeclaredvibrationtotalvalue(s)hasbeenmeasuredinaccordancewithastandardtestmethodand

maybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during actual use of the power tool can dier from the declared

value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

Product specificaties

Merk:	Makita
Categorie:	Heggenschaar
Model:	UH004GZ

Heb je hulp nodig?

Als je hulp nodig hebt met Makita UH004GZ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heggenschaar Makita

Makita DUH604S Handleiding

21 December 2024

Makita DUN461WZ Handleiding

1 Juni 2023

Makita EN7350SH Handleiding

29 Mei 2023

Makita BUH521Z Handleiding

16 Mei 2023

Makita DUP361 Handleiding

15 Mei 2023

Makita DUN600LRTE Handleiding

13 Mei 2023

Makita DUH523 Handleiding

10 Mei 2023

Makita UH4830 Handleiding

7 Mei 2023

Makita UH200DWX Handleiding

2 Mei 2023

Makita UH303DST Handleiding

1 Mei 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Gardena Set AccuCut Li Art. 9852-33 Handleiding

17 December 2024

Powerplus POW615 Handleiding

1 Oktober 2024

Gardena THS 500-48 Art. 8883 Handleiding

17 December 2024

Anova E60HT Handleiding

20 December 2024

Turbo-Silent HS 6060 Handleiding

17 December 2024

Turbo-Silent HS 5542 Handleiding

17 December 2024

Bavaria BPH 2652/1 Handleiding

5 December 2024

Powerplus POW6128 Handleiding

1 Oktober 2024

Powerplus POW6110 Handleiding

1 Oktober 2024

Worx WG263E.9 Handleiding

3 December 2024