Makita DUN600LRTE Handleiding
Makita
Heggenschaar
DUN600LRTE
Lees hieronder de ๐ handleiding in het Nederlandse voor Makita DUN600LRTE (20 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
INSTRUCTION MANUAL
Cordless Pole Hedge Trimmer
DUN500W
DUN600L
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUN500W DUN600L
Blade length 500 mm 600 mm
Strokes per minute 2,000 / 3,600 / 4,400 min
-1
Cutting blade angle 115ยฐ (up 45ยฐ, down 70ยฐ) โ
Overall length 2,115 mm 2,050 mm
Rated voltage D.C. 18 V
Net weight 3.9 - 4.3 kg 3.7 - 4.1 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎may๎di๏er๎from๎country๎to๎country.
โข๎ The๎weight๎may๎di๏er๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
โข๎ Some๎of๎the๎battery๎cartridges๎and๎chargers๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎Use๎of๎any๎other๎battery๎cartridges๎
and๎chargers๎may๎cause๎injury๎and/or๎๎ฟre.
Recommended battery adapter
Battery๎adapter PDC01
โข๎ The๎battery๎adapter(s)๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎residence.
โข๎ Before๎using๎the๎battery๎adapter,๎read๎instruction๎and๎cautionary๎markings๎on๎the๎battery๎adapter.
Symbols
The๎followings๎show๎the๎symbols๎used๎for๎the๎equip-
ment.๎Be๎sure๎that๎you๎understand๎their๎meaning๎before๎
use.
Read instruction manual.
Do not expose to moisture.
Wear a helmet, goggles and ear protection.
Beware of pinching.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Ni-MH
Li-ion
Only๎for๎EU๎countries
Do๎not๎dispose๎of๎electric๎equipment๎or๎battery๎
pack together with household waste material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment๎and๎Batteries๎and๎Accumulators๎
and Waste Batteries and Accumulators
and their implementation in accordance
with๎national๎laws,๎electric๎equipment๎and๎
batteries๎and๎battery๎pack(s)๎that๎have๎
reached the end of their life must be col-
lected๎separately๎and๎returned๎to๎an๎envi-
ronmentally๎compatible๎recycling๎facility.
Intended use
The tool is intended for trimming hedges.
Noise
The๎typical๎A-weighted๎noise๎level๎determined๎accord-
ing to EN62841-4-2:
Model DUN500W
Sound pressure level (L
pA) : 81.5 dB(A)
Sound power level (L
WA) : 92.5 dB (A)
Uncertainty๎(K)๎:๎3๎dB(A)
Model DUN600L
Sound pressure level (L
pA) : 82.5 dB(A)
Sound power level (L
WA) : 93.5 dB (A)
Uncertainty๎(K)๎:๎3๎dB(A)
3 ENGLISH
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method๎and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎
another.
NOTE: The declared noise emission value(s)
may๎also๎be๎used๎in๎a๎preliminary๎assessment๎of๎
exposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can di๏er from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o๏ and when
it is running idle in addition to the trigger time).
Vibration
Applicable standard : EN62841-4-2
Model Left hand (Front grip / Handle) Right hand (Rear grip)
ah (m/s2)Uncertainty๎K๎
(m/s2)
ah (m/s2)Uncertainty๎K๎
(m/s2)
DUN500W 4.7 1.5 2.5 m/s2 or
less
1.5
DUN600L 3.8 1.5 2.7 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may๎be๎used๎for๎comparing๎one๎tool๎with๎another.
NOTE:๎The๎declared๎vibration๎total๎value(s)๎may๎also๎be๎used๎in๎a๎preliminary๎assessment๎of๎exposure.
WARNING: The vibration emission during actual use of the power tool can di๏er from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o๏ and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The๎EC๎declaration๎of๎conformity๎is๎included๎as๎Annex๎A๎
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided
with this power tool. Failure to follow all instructions
listed๎below๎may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎
serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which๎may๎ignite๎the๎dust๎or๎fumes.
3.
Keep children and bystanders away while operating a
power tool.๎Distractions๎can๎cause๎you๎to๎lose๎control.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodi๎ฟed๎plugs๎and๎
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎shock๎if๎your๎body๎is๎earthed๎or๎grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Product specificaties
Merk: | Makita |
Categorie: | Heggenschaar |
Model: | DUN600LRTE |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita DUN600LRTE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heggenschaar Makita
21 December 2024
1 Juni 2023
29 Mei 2023
16 Mei 2023
15 Mei 2023
13 Mei 2023
10 Mei 2023
7 Mei 2023
2 Mei 2023
1 Mei 2023
Handleiding Heggenschaar
- Heggenschaar Bosch
- Heggenschaar DeWalt
- Heggenschaar Karcher
- Heggenschaar WOLF-Garten
- Heggenschaar Al-ko
- Heggenschaar Atika
- Heggenschaar Batavia
- Heggenschaar Bavaria
- Heggenschaar Black Decker
- Heggenschaar Brandson
- Heggenschaar Budget
- Heggenschaar Dolmar
- Heggenschaar Echo
- Heggenschaar Efco
- Heggenschaar Einhell
- Heggenschaar Eurogarden
- Heggenschaar Ferm
- Heggenschaar Ferrex
- Heggenschaar Florabest
- Heggenschaar Flymo
- Heggenschaar Fuxtec
- Heggenschaar Gamma
- Heggenschaar Garden Feelings
- Heggenschaar Garden Groom
- Heggenschaar Gardena
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Greenworks
- Heggenschaar Grizzly
- Heggenschaar Gude
- Heggenschaar Hanseatic
- Heggenschaar Hikoki
- Heggenschaar Hitachi
- Heggenschaar Hoberg
- Heggenschaar Homelite
- Heggenschaar Honda
- Heggenschaar Husqvarna
- Heggenschaar Hyundai
- Heggenschaar Kaaz
- Heggenschaar Kibani
- Heggenschaar Kingcraft
- Heggenschaar Kress
- Heggenschaar Levita
- Heggenschaar Lux Tools
- Heggenschaar McCulloch
- Heggenschaar Metabo
- Heggenschaar Milwaukee
- Heggenschaar Mr Gardener
- Heggenschaar Parkside
- Heggenschaar Pattfield
- Heggenschaar Powerpeak
- Heggenschaar Powerplus
- Heggenschaar Remington
- Heggenschaar Robust
- Heggenschaar Ryobi
- Heggenschaar Scheppach
- Heggenschaar Shindaiwa
- Heggenschaar Skil
- Heggenschaar Sterwins
- Heggenschaar Stiga
- Heggenschaar Stihl
- Heggenschaar Tanaka
- Heggenschaar Tel Sell
- Heggenschaar Texas
- Heggenschaar Toledo
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar Varo
- Heggenschaar Vonroc
- Heggenschaar Worx
- Heggenschaar Yardforce
- Heggenschaar Zipper
- Heggenschaar Ozito
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar Meec Tools
- Heggenschaar Cotech
- Heggenschaar Fieldmann
- Heggenschaar McGregor
- Heggenschaar Sun Joe
- Heggenschaar Challenge
- Heggenschaar Cramer
- Heggenschaar EGO
- Heggenschaar Grouw
- Heggenschaar Gtech
- Heggenschaar Hurricane
- Heggenschaar MacAllister
- Heggenschaar Maruyama
- Heggenschaar Sovereign
- Heggenschaar Spear & Jackson
- Heggenschaar CMI
- Heggenschaar Powerworks
- Heggenschaar Craftsman
- Heggenschaar Verto
- Heggenschaar G-Technology
- Heggenschaar Jonsered
- Heggenschaar Qualcast
- Heggenschaar Bestgreen
- Heggenschaar Baumr-AG
- Heggenschaar Martha Stewart
- Heggenschaar Mac Allister
- Heggenschaar Deltafox
- Heggenschaar Anova
- Heggenschaar Challenge Xtreme
- Heggenschaar Palmera
- Heggenschaar Proviel
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
- Heggenschaar Maxbear
- Heggenschaar Yellow Garden Line
- Heggenschaar Turbo-Silent
Nieuwste handleidingen voor Heggenschaar
17 December 2024
1 Oktober 2024
17 December 2024
20 December 2024
17 December 2024
17 December 2024
5 December 2024
1 Oktober 2024
1 Oktober 2024
3 December 2024