Makita M6501 Handleiding

Makita Boormachine M6501

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita M6501 (11 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

GB High Speed Drill Instruction Manual

F Perceuse à Haute Vitesse Manuel d’Instructions

DHochgeschwindigkeits-

Bohrmaschine Betriebsanleitung

I Trapano ad alta velocità Istruzioni d’Uso

NL Hoge-snelheid boormachine Gebruiksaanwijzing

E Taladro de Alta Velocidad Manual de Instrucciones

P Furadeira de Alta Velocidade Manual de Instruções

DK Hurtigløbende boremaskine Brugsanvisning

GR Τρυπάνι υψηλής ταχύτητας Οδηγίες χρήσεως

TR Yüksek Hızlı ı Matkap Kullanma k lavuzu

M6500

M6501

1 2

3 4

013476 013477

013475 013712

015473

ENGLISH (Original instructions)

Explanation of general view

1 Switch trigger

2 Lock button

3 Reversing switch lever

4 Chuck key

5 Depth gauge

6 Washer

7 Clamp screw

SPECIFICATIONS

• Due to our continuing program of research and

development, the specifications herein are subject to

change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE032-1

Intended use

The tool is intended for drilling in wood, metal and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future

reference.

GEB001-6

DRILL SAFETY WARNINGS

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

4. Hold the tool firmly.

5. Keep hands away from rotating parts.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

8. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always check to see the

switch trigger actuates properly and returns to the

“OFF” position when released.

• Switch can be locked in “ON” position for ease of

operator comfort during extended use. Apply caution

when locking tool in “ON” position and maintain firm

grasp on tool.

For Model M6500

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop. For continuous operation, pull

the switch trigger, push in the lock button and then

release the switch trigger. To stop the tool from the

locked position, pull the switch trigger fully, then release

it.

Model M6500 M6501

Capacities

Steel 6.5 mm

Wood 9 mm

No load speed (min–1 ) 4,500 0 – 4,500

Overall length 200 mm 203 mm

Net weight 0.92 kg 0.95 kg

Safety class /II

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	M6501
Kleur van het product:	Black,Red
Gewicht:	950 g
Breedte:	63 mm
Diepte:	203 mm
Hoogte:	171 mm
Stroombron:	AC
Soft grip:	Ja
Input vermogen:	230 W
Stationair toerental (max):	4500 RPM
Boor diameter in staal (max):	6.5 mm
Boor diameter in beton (max):	- mm
Boor diameter in hout (max):	9 mm
Geluidsdrukniveau:	70 dB
Onzekerheid K:	1.5 m/s²
Reverse:	Ja
Spanklauw breedte (min):	0.5 mm
Spanklauw breedte (max):	6.5 mm
Trillingsniveau (metaalboren):	3 m/s²
Aanpasbare snelheid:	Ja
Geluidsniveau onzekerheid:	3 dB