Makita LXPH01 Handleiding

Makita Boormachine LXPH01

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita LXPH01 (32 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Cordless Hammer Driver Drill
Perceuse Percussion-
V
isseuse sans
Fil
Rotomartillo Atornillador
Inalámbrico
LXPH01
LXPH02
011491
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model LXPH01 LXPH02
Concrete 13 mm (1/2") 13 mm (1/2")
Steel 13 mm (1/2") 13 mm (1/2")
Wood 38 mm (1-1/2") 38 mm (1-1/2")
Wood screw 10 mm x 89 mm (3/8" x 3-1/2") 6 mm x 75 mm (1/4" x 2-15/16")
Capacities
Machine screw M6 (1/4") M6 (1/4")
High (2) 0 - 1,500/min. 0 - 1,500/min.
No load speed (RPM) Low (1) 0 - 400/min. 0 - 400/min.
High (2) 0 - 22,500/min. 0 - 22,500/min.
Blows per minute Low (1) 0 - 6,000/min. 0 - 6,000/min.
Overall length 206 mm (8-1/8") 206 mm (8-1/8")
Net weight 1.6kg (3.4 lbs) 1.8kg (4.0 lbs) 1.7kg (3.8 lbs)
Rated voltage D.C. 18 V D.C. 14.4 V
Standard battery cartridge BL1815 BL1830 BL1430
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
3
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
16.
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
dust collection can reduce dust-related hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
20. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Battery tool use and care
24. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
25. Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
26. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a fire.
27. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
Service
28. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
29. Follow instruction for lubricating and
changing accessories.
30. Keep handles dry, clean and free from oil and
grease.
GEB056-4
CORDLESS HAMMER DRIVER
DRILL SAFETY WARNINGS
1. Wear ear protectors with impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the
cutting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
4. Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.

Product specificaties

Merk: Makita
Categorie: Boormachine
Model: LXPH01

Heb je hulp nodig?

Als je hulp nodig hebt met Makita LXPH01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Boormachine Makita

Makita

Makita DDF459 Handleiding

21 December 2024
Makita

Makita HR4002 Handleiding

23 November 2024
Makita

Makita DX10 Handleiding

7 Mei 2024
Makita

Makita DX16 Handleiding

7 Mei 2024
Makita

Makita DX12 Handleiding

7 Mei 2024
Makita

Makita DHP485 Handleiding

30 Augustus 2023
Makita

Makita HP347DWE Handleiding

8 Juli 2023
Makita

Makita DK0025 set Handleiding

27 Juni 2023
Makita

Makita DX08 Handleiding

20 Juni 2023
Makita

Makita DX09 Handleiding

19 Juni 2023

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

Total

Total TRHLI1601 Handleiding

16 December 2024
Black Decker

Black Decker 1963 Handleiding

8 December 2024
Black Decker

Black Decker 1350-09 Handleiding

8 December 2024
Gude

Gude GTB 16/5 R Handleiding

8 December 2024
Hikoki

Hikoki DV36DA Handleiding

7 December 2024
Hikoki

Hikoki DH26PC2 Handleiding

7 December 2024
Hikoki

Hikoki DH28PCY2 Handleiding

7 December 2024
Zipper

Zipper ZI-BHA1500DN Handleiding

7 December 2024
Bavaria

Bavaria BRH 850 Handleiding

5 December 2024
Bavaria

Bavaria BCD 18/1 2B Handleiding

5 December 2024