Makita JS1601 Handleiding

Makita Schaar JS1601

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita JS1601 (28 pagina's) in de categorie Schaar. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

Metal Shear/ Straight Metal Shear Instruction Manual

Cisaille/ Cisaille à coupe droite Manuel d’instructions

Blechschere/ Blechschere Betriebsanleitung

Cesoia metallica/

Cesoia metallica diritta Istruzioni d’uso

Plaatschaar/ Rechte plaatschaar Gebruiksaanwijzing

Cizalla para Metal/

Cizalla Recta para Metal Manual de instrucciones

Tesoura Faca/ Tesoura Faca

Manual de instruções

Metalpladesaks/ Lige metalpladesaks Brugsanvisning

GR Ψαλίδι μετάλλων/ Ίσιο ψαλίδι μετάλλων Οδηγίες χρήσεως

JS1000

JS1601

1 2

3 4

5 6

ENGLISH (Original instructions)

Explanation of general view

1 Switch lever

2 Hex wrench

3 Screw

4 Thickness gauge

5 Center blade

6 Side blade

7 Hex socket head bolt

8 Pin

SPECIFICATIONS

Model JS1000 JS1601

Max. cutting capacities

Steel up to 400 N/mm2 ............................................................. 1.0 mm (20 ga.) 1.6 mm (16 ga.)

Steel up to 600 N/mm2 ............................................................. 0.7 mm (23 ga.) 1.2 mm (18 ga.)

Steel up to 800 N/mm2 ............................................................. 0.5 mm (26 ga.) 0.8 mm (21 ga.)

Aluminum up to 200 N/mm2 ..................................................... 2.5 mm (12 ga.) 2.5 mm (12 ga.)

Min. cutting radius ....................................................................... 30 mm 250 mm

Strokes per minute (min-1 )............................................................ 4,500 4,500

Overall length .............................................................................. 322 mm 320 mm

Net weight .................................................................................... 1.4 kg 1.4 kg

Safety class ................................................................................. /II /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE037-1

Intended use

The tool is intended for cutting sheet steel and stainless

sheet steel.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB027-2

SHEAR SAFETY WARNINGS

1. Hold the tool firmly.

2. Secure the workpiece firmly.

3. Keep hands away from moving parts.

4. Edges and chips of the workpiece are sharp.

Wear gloves. It is also recommended that you

put on thickly bottomed shoes to prevent injury.

5. Do not put the tool on the chips of the work-

piece. Otherwise it can cause damage and trou-

ble on the tool.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

8. Do not touch the blade or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

9. Avoid cutting electrical wires. It can cause seri-

ous accident by electric shock.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

Product specificaties

Merk:	Makita
Categorie:	Schaar
Model:	JS1601
Kleur van het product:	Black, Blue
Gewicht:	1400 g
Breedte:	70 mm
Diepte:	320 mm
Hoogte:	78 mm
Stroombron:	AC
Input vermogen:	380 W
Stationair aantal zaagbewegingen (max):	4500 spm
Snijcapaciteit in aluminium (250 N/mm²):	2.5 mm
Snijcapaciteit in staal (600 N/mm²):	1.2 mm
Snijcapaciteit in staal (400 N/mm²):	1.6 mm
Minimale snijradius:	250 mm
Snijcapaciteit in staal (800 N/mm²):	0.8 mm