Makita HR2601 Handleiding

Makita Boormachine HR2601

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita HR2601 (16 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Rotary Hammer

Combination Hammer

HR2300

HR2310T

HR2600

HR2601

HR2610

HR2610T

HR2611F

HR2611FT

010712

ENGLISH (Original instructions)

SPECIFICATIONS

Model HR2300

HR2310T

HR2600 HR2601 HR2610

HR2610T HR2611F

HR2611FT

Concrete 23 mm 26 mm

Core bit 68 mm 68 mm 68 mm

Diamond core bit (dry type)

70 mm 80 mm 80 mm

Steel 13 mm 13 mm 13 mm

Capacities

Wood 32 mm 32 mm 32 mm

No load speed (min-1) 0 - 1,200

Blows per minute 0 - 4,600

Overall length 356 mm 380 mm 361 mm 385 mm 361 mm 385 mm

Net weight 2.7 kg 2.9 kg 2.8 kg 2.9 kg 2.8 kg 2.9 kg 2.9 kg 3.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE042-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone.

It is also suitable for drilling without impact in wood, metal,

ceramic and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model HR2300, HR2601, HR2611F, HR2611FT

Sound pressure level (L

pA) : 90 dB (A)

Sound power level (L

WA) : 101 dB (A)

Uncertainty (K) : 3 dB (A)

Model HR2310T, HR2600, HR2610, HR2610T

Sound pressure level (L

pA) : 91 dB (A)

Sound power level (L

WA) : 102 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model HR2300, HR2600

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 15.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

Uncertainty (K) : 1.5 m/s2

Model HR2310T

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 15.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 10.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model HR2601

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 12.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model HR2610

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 15.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model HR2610T

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 15.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model HR2611F

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 12.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 9.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model HR2611FT

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 11.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Rotary Hammer

Model No./ Type: HR2300, HR2310T, HR2600, HR2601

Conforms to the following European Directives:

2006/42/EC

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	HR2601
Stroombron:	AC
Input vermogen:	800 W
Boor diameter in staal (max):	13 mm
Boor diameter in hout (max):	32 mm
Boorhouder:	SDS-plus
Aanslag-energie:	2.4 J
Nominale snelheid:	1200 RPM