Makita HR004GD202 Handleiding

Makita Boormachine HR004GD202

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita HR004GD202 (28 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
INSTRUCTION MANUAL
Cordless Combination Hammer
HR001G
HR002G
HR003G
HR004G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HR001G HR002G HR003G HR004G
Capacities Concrete 28 mm
Core bit 54 mm
Diamond core bit (dry type) 65 mm
Steel 13 mm
Wood 32 mm
No load speed 0 - 980 min-1
Blows per minute 0 - 5,000 min-1
Rated voltage D.C. 36 V - 40 V max
Overall length with BL4025 358 mm 389 mm 358 mm 389 mm
with BL4040 373 mm 404 mm 373 mm 404 mm
Net weight 3.9 - 4.6 kg 4.1 - 4.6 kg 3.9 - 4.6 kg 4.0 - 4.5 kg
Optional accessory
Model: DX12 (For HR001G/HR003G) DX14 (For HR002G/HR004G)
Suction performance 350 l/min
Operating stroke Up to 190 mm
Suitable drill bit Up to 260 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 1.6 kg
โ€ข๎€ƒ Due๎€ƒto๎€ƒour๎€ƒcontinuing๎€ƒprogram๎€ƒof๎€ƒresearch๎€ƒand๎€ƒdevelopment,๎€ƒthe๎€ƒspeci๎‚ฟcations๎€ƒherein๎€ƒare๎€ƒsubject๎€ƒto๎€ƒchange๎€ƒ
without notice.
โ€ข๎€ƒ Speci๎‚ฟcations๎€ƒmay๎€ƒdiffer๎€ƒfrom๎€ƒcountry๎€ƒto๎€ƒcountry.
โ€ข The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
โ€ข Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and๎€ƒchargers๎€ƒmay๎€ƒcause๎€ƒinjury๎€ƒand/or๎€ƒ๎‚ฟre.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-6:
Model HR001G
Sound pressure level (L
pA) : 95 dB(A)
Sound power level (L
WA) : 106 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR002G
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
3 ENGLISH
Model HR003G
Sound pressure level (LpA ) : 95 dB(A)
Sound power level (LWA) : 106 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR004G
Sound pressure level (LpA ) : 93 dB(A)
Sound power level (LWA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR001G with DX12
Sound pressure level (LpA ) : 93 dB(A)
Sound power level (LWA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR002G with DX14
Sound pressure level (LpA ) : 93 dB(A)
Sound power level (LWA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR003G with DX12
Sound pressure level (LpA ) : 93 dB(A)
Sound power level (LWA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR004G with DX14
Sound pressure level (LpA ) : 93 dB(A)
Sound power level (LWA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Vibration
The following table shows the vibration total value (tri-axial
vector sum) determined according to applicable standard.
Model HR001G
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD )
7.0 m/s
21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX12 (ah, HD)
7.0 m/s
21.5 m/s2EN60745-2-6
Chiselling
function with
side grip (ah,
Cheq )
6.5 m/s
21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
2.5 m/s
2 or
less
1.5 m/s2EN60745-2-1
Model HR002G
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD)
6.5 m/s21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX14 (ah, HD )
6.0 m/s21.5 m/s2EN60745-2-6
Chiselling
function with
side grip (ah,
Cheq)
7.5 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
2.5 m/s21.5 m/s2EN60745-2-1
Model HR003G
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD)
7.0 m/s21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX12 (ah, HD )
7.0 m/s21.5 m/s2EN60745-2-6
Chiselling
function with
side grip (ah,
Cheq)
7.0 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
2.5 m/s2 or
less
1.5 m/s2EN60745-2-1
Model HR004G
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD)
6.5 m/s21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX14 (ah, HD )
6.0 m/s21.5 m/s2EN60745-2-6
Chiselling
function with
side grip (ah,
Cheq)
7.5 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
2.5 m/s21.5 m/s2EN60745-2-1
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.


Product specificaties

Merk: Makita
Categorie: Boormachine
Model: HR004GD202

Heb je hulp nodig?

Als je hulp nodig hebt met Makita HR004GD202 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Makita

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine