Makita HP347DWE Handleiding

Makita Boormachine HP347DWE

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita HP347DWE (48 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

GB Cordless Hammer Driver Drill Instruction manual

F Perceuse Percussion-Visseuse Manuel d’instructions

sans Fil

D Akku-Schlagbohrschrauber Betriebsanleitung

I Trapano avvitatore a batterie Istruzioni per l’uso

con percussione

NL Accuschroef- Gebruiksaanwijzing

boorhamermachine

E Rotomartillo Atornillador Manual de instrucciones

Inalámbrico

P Furadeira de Impacto / Manual de instruções

Parafusadeira a Bateria

DK Ledningsfri slagboremaskine Brugsanvisning

GR Κρουστικό δραπανοκατσάβιδο Οδηγίες χρήσης

μπαταρίας

HP347D

HP457D

011786

1011787 0117882

3011789 0117904

5011791 0117926

7 8002449 011793

ENGLISH (Original instructions)

Explanation of general view

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change without

notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use ENE039-1

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

General Power Tool Safety

Warnings GEA010-1

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

CORDLESS HAMMER DRILL

SAFETY WARNINGS GEB056-3

1. Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

4. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

5. Hold the tool firmly.

6. Keep hands away from rotating parts.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the bit or the workpiece immediately

after operation; they may be extremely hot and

could burn your skin.

9. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation and

skin contact. Follow material supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

1. Red indicator

2. Button

3. Battery cartridge

4. Switch trigger

5. Reversing switch lever

6. Speed change lever

7. Adjusting ring

8. Action mode changing ring

9. Graduation

10. Arrow

11. Sleeve

12. Blow-out bulb

Model HP347D HP457D

Capacities

Concrete 10 mm 13 mm

Steel 10 mm 13 mm

Wood 25 mm 36 mm

Wood screw 5.1 mm x 63 mm 6 mm x 75 mm

Machine screw 6 mm

No load speed (min-1)High (2) 0 - 1,400

Low (1) 0 - 400

Blows per minute (min -1)High (2) 0 - 21,000

Low (1) 0 - 6,000

Overall length North/South America 216 mm 246 mm

Other countries 239 mm

Net weight 1.5 kg 1.7 kg

Rated voltage D.C. 14.4 V D.C. 18 V

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	HP347DWE
Kleur van het product:	Black, Green, Silver
Gewicht:	1500 g
Breedte:	83 mm
Diepte:	216 mm
Hoogte:	235 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	14.4 V
Inactieve snelheid (1ste versnelling):	400 RPM
Inactieve snelheid (2e versnelling):	1400 RPM
Boor diameter in staal (max):	10 mm
Boor diameter in beton (max):	10 mm
Boor diameter in hout (max):	25 mm
Aantal versnellingen:	2
Opbergetui:	Ja
Reverse:	Ja
Boren:	Ja
Schroeven:	Ja
Draaistanden:	16
Maximale koppel (zachte applicaties):	15 Nm
Spanklauw breedte (min):	1.5 mm
Spanklauw breedte (max):	10 mm
Maximale koppel (harde applicaties):	30 Nm
Inclusief acculader:	Ja
Inclusief batterij:	Ja
Batterij capaciteit:	1.3 Ah
Klopboren:	Ja
Aantal slagen (hoge snelheid):	21000 bpm
Aantal inbegrepen batterijen:	2 stuk(s)
Productontwerp:	Boormachine met pistoolgreep
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Aantal slagen (lage snelheid):	6000 bpm