Makita HP332D Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita HP332D (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
INSTRUCTION MANUAL
Cordless Hammer Driver Drill
HP332D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HP332D
Drilling capacities 8 mmConcrete
Steel 10 mm
Wood 28 mm
Fastening capacities Wood screw 5.1 mm x 63 mm
Machine screw M6
No load speed High (2) 0 - 1,500 min-1
Low (1) 0 - 450 min-1
Blows per minute High (2) 0 - 22,500 min-1
Low (1) 0 - 6,750 min-1
Overall length 168 mm
Rated voltage D.C. 10.8 V - 12 V max
Battery cartridge BL1016, BL1021B BL1041B
Net weight 1.1 kg 1.3 kg
โ€ข๎€ƒ Due๎€ƒto๎€ƒour๎€ƒcontinuing๎€ƒprogram๎€ƒof๎€ƒresearch๎€ƒand๎€ƒdevelopment,๎€ƒthe๎€ƒspeci๎‚ฟcations๎€ƒherein๎€ƒare๎€ƒsubject๎€ƒto๎€ƒchange๎€ƒ
without notice.
โ€ข๎€ƒ Speci๎‚ฟcations๎€ƒand๎€ƒbattery๎€ƒcartridge๎€ƒmay๎€ƒdiffer๎€ƒfrom๎€ƒcountry๎€ƒto๎€ƒcountry.
โ€ข๎€ƒ Weight,๎€ƒwith๎€ƒbattery๎€ƒcartridge,๎€ƒaccording๎€ƒto๎€ƒEPTA-Procedure๎€ƒ01/2003
Symbols
The๎€ƒfollowing๎€ƒshow๎€ƒthe๎€ƒsymbols๎€ƒused๎€ƒfor๎€ƒthe๎€ƒequip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Cd
Ni-MH
Li-ion
Only๎€ƒfor๎€ƒEU๎€ƒcountries
Do๎€ƒnot๎€ƒdispose๎€ƒof๎€ƒelectric๎€ƒequipment๎€ƒor๎€ƒ
battery pack together with household waste
material!
In๎€ƒobservance๎€ƒof๎€ƒthe๎€ƒEuropean๎€ƒDirectives,๎€ƒ
on๎€ƒWaste๎€ƒElectric๎€ƒand๎€ƒElectronic๎€ƒ
Equipment๎€ƒand๎€ƒBatteries๎€ƒand๎€ƒAccumulators๎€ƒ
and๎€ƒWaste๎€ƒBatteries๎€ƒand๎€ƒAccumulators๎€ƒ
and their implementation in accordance
with๎€ƒnational๎€ƒlaws,๎€ƒelectric๎€ƒequipment๎€ƒand๎€ƒ
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The๎€ƒtool๎€ƒis๎€ƒintended๎€ƒfor๎€ƒimpact๎€ƒdrilling๎€ƒin๎€ƒbrick,๎€ƒconcrete๎€ƒ
and stone. It is also suitable for screw driving and drill-
ing without impact in wood, metal, ceramic and plastic.
Noise
The๎€ƒtypical๎€ƒA-weighted๎€ƒnoise๎€ƒlevel๎€ƒdetermined๎€ƒaccord-
ing๎€ƒto๎€ƒEN60745:
Sound pressure level (LpA)๎€ƒ:๎€ƒ82๎€ƒdB(A)
Sound power level (LWA)๎€ƒ:๎€ƒ93๎€ƒdB๎€ƒ(A)
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ3๎€ƒdB(A)
WARNING: Wear ear protection.
Vibration
The๎€ƒvibration๎€ƒtotal๎€ƒvalue๎€ƒ(tri-axial๎€ƒvector๎€ƒsum)๎€ƒdeter-
mined๎€ƒaccording๎€ƒto๎€ƒEN60745:
Work๎€ƒmode:๎€ƒimpact๎€ƒdrilling๎€ƒinto๎€ƒconcrete
Vibration emission (a
h,ID)๎€ƒ:๎€ƒ12.5๎€ƒm/s2
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ1.5๎€ƒm/s
2
Work๎€ƒmode:๎€ƒdrilling๎€ƒinto๎€ƒmetal
Vibration emission (a
h,D)๎€ƒ:๎€ƒ2.5๎€ƒm/s2 or less
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ1.5๎€ƒm/s
2
NOTE:๎€ƒThe๎€ƒdeclared๎€ƒvibration๎€ƒemission๎€ƒvalue๎€ƒhas๎€ƒ
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:๎€ƒThe๎€ƒdeclared๎€ƒvibration๎€ƒemission๎€ƒvalue๎€ƒ
may also be used in a preliminary assessment of
exposure.
WARNING:๎€ƒThe๎€ƒvibration๎€ƒemission๎€ƒduring๎€ƒactual๎€ƒ
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita๎€ƒdeclares๎€ƒthat๎€ƒthe๎€ƒfollowing๎€ƒMachine(s):
Designation๎€ƒof๎€ƒMachine:๎€ƒCordless๎€ƒHammer๎€ƒDriver๎€ƒDrill
Model๎€ƒNo./๎€ƒType:๎€ƒHP332D
Conforms๎€ƒto๎€ƒthe๎€ƒfollowing๎€ƒEuropean๎€ƒDirectives:๎€ƒ
2006/42/EC
3 ENGLISH
They๎€ƒare๎€ƒmanufactured๎€ƒin๎€ƒaccordance๎€ƒwith๎€ƒthe๎€ƒfollowing๎€ƒ
standard๎€ƒor๎€ƒstandardized๎€ƒdocuments:๎€ƒEN60745
The๎€ƒtechnical๎€ƒ๎‚ฟle๎€ƒin๎€ƒaccordance๎€ƒwith๎€ƒ2006/42/EC๎€ƒis๎€ƒ
available๎€ƒfrom:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
11.6.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions๎€ƒmay๎€ƒresult๎€ƒin๎€ƒelectric๎€ƒshock,๎€ƒ๎‚ฟre๎€ƒand/or๎€ƒ
serious๎€ƒinjury.
Save all warnings and instruc-
tions for future reference.
The๎€ƒterm๎€ƒ"power๎€ƒtool"๎€ƒin๎€ƒthe๎€ƒwarnings๎€ƒrefers๎€ƒto๎€ƒyour๎€ƒ
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ƒ€ammable
liquids, gases or dust.๎€ƒPower๎€ƒtools๎€ƒcreate๎€ƒsparks๎€ƒ
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎‚ฟed๎€ƒplugs๎€ƒand๎€ƒmatching๎€ƒoutlets๎€ƒwill๎€ƒ
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.๎€ƒThere๎€ƒis๎€ƒan๎€ƒincreased๎€ƒrisk๎€ƒof๎€ƒelec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.๎€ƒUse๎€ƒof๎€ƒ
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.๎€ƒUse๎€ƒof๎€ƒan๎€ƒRCD๎€ƒreduces๎€ƒ
the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎ƒ€uence of drugs, alcohol or med-
ication.๎€ƒA๎€ƒmoment๎€ƒof๎€ƒinattention๎€ƒwhile๎€ƒoperating๎€ƒ
power๎€ƒtools๎€ƒmay๎€ƒresult๎€ƒin๎€ƒserious๎€ƒpersonal๎€ƒinjury.
2. Use personal protective equipment. Always
wear eye protection.๎€ƒProtective๎€ƒequipment๎€ƒsuch๎€ƒ
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will๎€ƒreduce๎€ƒpersonal๎€ƒinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your๎€ƒ๎‚ฟnger๎€ƒon๎€ƒthe๎€ƒswitch๎€ƒor๎€ƒenergising๎€ƒpower๎€ƒtools๎€ƒ
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎€ƒA๎€ƒwrench๎€ƒor๎€ƒa๎€ƒkey๎€ƒleft๎€ƒ
attached to a rotating part of the power tool may
result๎€ƒin๎€ƒpersonal๎€ƒinjury.
5. Do not overreach. Keep proper footing and
balance at all times.๎€ƒThis๎€ƒenables๎€ƒbetter๎€ƒcontrol๎€ƒ
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.๎€ƒLoose๎€ƒclothes,๎€ƒjewel-
lery or long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.๎€ƒUse๎€ƒof๎€ƒ
dust collection can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application.๎€ƒThe๎€ƒcorrect๎€ƒ
power๎€ƒtool๎€ƒwill๎€ƒdo๎€ƒthe๎€ƒjob๎€ƒbetter๎€ƒand๎€ƒsafer๎€ƒat๎€ƒthe๎€ƒ
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off.๎€ƒAny๎€ƒpower๎€ƒtool๎€ƒthat๎€ƒcannot๎€ƒ
be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre
-
ventive safety measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool.๎€ƒPower๎€ƒtools๎€ƒare๎€ƒdangerous๎€ƒin๎€ƒthe๎€ƒ
hands of untrained users.
5. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power toolโ€™s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean.๎€ƒProperly๎€ƒ
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,


Product specificaties

Merk: Makita
Categorie: Boormachine
Model: HP332D
Kleur van het product: Black,Blue
Gewicht: 1300 g
Breedte: 66 mm
Diepte: 168 mm
Hoogte: 236 mm
Stroombron: Batterij/Accu
Accu/Batterij voltage: 10.8 V
Soft grip: Ja
Inactieve snelheid (1ste versnelling): 450 RPM
Inactieve snelheid (2e versnelling): 6750 RPM
Boor diameter in staal (max): 10 mm
Boor diameter in beton (max): 10 mm
Boor diameter in hout (max): 28 mm
Geluidsdrukniveau: 82 dB
Aantal versnellingen: 2
Onzekerheid K: 1.5 m/sยฒ
Opbergetui: Ja
Ingebouwd licht: Ja
Boren: Ja
Schroeven: Ja
Draaistanden: 21
Maximale koppel (zachte applicaties): 21 Nm
Spanklauw breedte (min): 1 mm
Spanklauw breedte (max): 10 mm
Trillingsniveau (metaalboren): 2.5 m/sยฒ
Maximale koppel (harde applicaties): 35 Nm
Inclusief acculader: Ja
Inclusief batterij: Ja
Batterij capaciteit: 4 Ah
Geluidsniveau onzekerheid: 3 dB
Klopboren: Ja
Aantal slagen (hoge snelheid): 22500 bpm
Trillingsniveau (betonboren): 12.5 m/sยฒ
Aantal inbegrepen batterijen: 2 stuk(s)
Productontwerp: Boormachine met pistoolgreep
Batterijtechnologie: Lithium-Ion (Li-Ion)
Aantal slagen (lage snelheid): 1500 bpm

Heb je hulp nodig?

Als je hulp nodig hebt met Makita HP332D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Makita

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine