Makita HK0500 Handleiding

Makita Boormachine HK0500

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita HK0500 (32 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Power Scraper Instruction Manual

Décapeur Manuel d’Instructions

Kratzer Betriebsanleitung

Scalpellatore Istruzioni d’Uso

Bikhamer Gebruiksaanwijzing

Raspadora Manual de Instrucciones

Hartelo minidemolidor para descasque

Manual de instruções

Elektronisk mejselhammer Brugsanvisning

GR Ηλεκτρικς ξύστης Οδηγίες χρήσεως

HK0500

1 2

3 4

5 6

ENGLISH (Original instructions)

Explanation of general view

1 Switch trigger

2 Adjusting dial

3 Bit

4 Chuck cover

5 Change ring

6 Scaling chisel

7 Tile

SPECIFICATIONS

Model HK0500

Blows per minute (min–1)........................... 2,000 – 3,500

Overall length .................................................... 468 mm

Net weight .............................................................. 3.2 kg

Safety class ............................................................... /II

• Due to our continuing programme of research and

development, the specifications herein are subject to

change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE047-1

Intended use

The tool is intended for chiselling work in concrete, brick,

stone and asphalt as well as for driving and compacting

with appropriate accessories.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB004-6

HAMMER SAFETY WARNINGS

1. Wear ear protectors. Exposure to noise can cause

hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly recom-

mended that you wear a dust mask and thickly

padded gloves.

5. Be sure the bit is secured in place before opera-

tion.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difficult.

8. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

9. Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-

one seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Do not operate the tool at no-load unnecessarily.

15. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	HK0500
Gewicht:	3000 g
Stroombron:	AC
Input vermogen:	550 W
Boorhouder:	SDS-plus
Aanpasbare snelheid:	Ja
Aanslag-energie:	1.8 J
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz