Makita GF600SE Handleiding
Makita
Nietmachine
GF600SE
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita GF600SE (12 pagina's) in de categorie Nietmachine. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Brad Nailer
GF600
012803
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GF600
Nail length Nail Gauge 16Ga :15 mm - 65 mm
Nail capacity 100 nails (2strip)
Dimensions (L X H X W) 266 mm X 90 mm X 304 mm
Net weight 2.2 kg
Rated voltage D.C. 7.2 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END107-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ Container under pressure, keep away
from temperatures over 50℃ (for ex.
sun radiation) Keep container in a well
ventilated place.
ï½¥ Use only outside or well ventilated
rooms. Do not breathe gas.
ï½¥ Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air mixture.
ï½¥ Do not damage, puncture or burn even
after use.
ï½¥ Wear safety glasses.
ï½¥ Keep fingers away from trigger when not
driving fasteners to avoid accidental
firing.
ï½¥ Use only in ventilated area to avoid
nausea and unconsciousness. Never
use tool in combustible atmospheres.
The tool exhaust may ignite flammable
materials.
ï½¥ Do not use on scaffoldings, ladders.
ï½¥ Warning: hot surface!
Do not touch around this symbol.
Touching the surface may cause burns
or injuries.
ï½¥ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE073-1
Intended use
The tool is intended for fastening on interior work and
furniture work.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN792:
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 106 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG904-2
Vibration
The vibration total value determined according to EN792:
Vibration emission (ah) : 3.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Cd
Ni-MH
Li-ion
3
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH003-13
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Brad Nailer
Model No./ Type: GF600
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN792,EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
26. 4. 2011
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
Product specificaties
Merk: | Makita |
Categorie: | Nietmachine |
Model: | GF600SE |
Kleur van het product: | Black,Blue |
Gewicht: | 2200 g |
Breedte: | 305 mm |
Diepte: | 90 mm |
Hoogte: | 266 mm |
Stroombron: | Pneumatisch |
Accu/Batterij voltage: | 7.2 V |
Inclusief batterij: | Ja |
Batterij capaciteit: | 1 Ah |
Maximum werkdruk: | - bar |
Batterijen inbegrepen: | Ja |
Batterijtechnologie: | Lithium-Ion (Li-Ion) |
Ondersteunde nietlengtes: | 15 - 64 mm |
Magazijn capaciteit: | 100 |
Spijker diameters ondersteund: | 1.6 mm |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita GF600SE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Nietmachine Makita
10 Juni 2023
9 Juni 2023
9 Juni 2023
3 Juni 2023
2 Juni 2023
22 Mei 2023
20 Mei 2023
13 Mei 2023
21 April 2023
15 April 2023
Handleiding Nietmachine
- Nietmachine Bosch
- Nietmachine DeWalt
- Nietmachine Whirlpool
- Nietmachine Einhell
- Nietmachine Fellowes
- Nietmachine Gude
- Nietmachine Hikoki
- Nietmachine Hitachi
- Nietmachine Holzmann
- Nietmachine Iluv
- Nietmachine Kensington
- Nietmachine Leitz
- Nietmachine Meister
- Nietmachine Metabo
- Nietmachine Milwaukee
- Nietmachine Parkside
- Nietmachine Powerfix
- Nietmachine Powerplus
- Nietmachine President
- Nietmachine Proline
- Nietmachine Ryobi
- Nietmachine Sencor
- Nietmachine Silverline
- Nietmachine Targus
- Nietmachine Topcraft
- Nietmachine Vonroc
- Nietmachine Workzone
- Nietmachine Klein Tools
- Nietmachine Rapid
- Nietmachine Genesis
- Nietmachine Fieldmann
- Nietmachine Porter-Cable
- Nietmachine Sun Joe
- Nietmachine Rapoo
- Nietmachine Dedra
- Nietmachine MSW
- Nietmachine Craftsman
- Nietmachine Surtek
- Nietmachine Rexel
- Nietmachine Swingline
- Nietmachine Aqua Joe
- Nietmachine Abac
- Nietmachine CTA Digital
- Nietmachine Meister Craft
- Nietmachine Werckmann
- Nietmachine POWERNAIL
- Nietmachine Neo
- Nietmachine Syscom
- Nietmachine Mannesmann
- Nietmachine Smart365
Nieuwste handleidingen voor Nietmachine
6 December 2024
3 December 2024
3 December 2024
15 Oktober 2024
27 Augustus 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024