Makita EK7650H Handleiding
Makita
Cirkelzagen
EK7650H
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita EK7650H (28 pagina's) in de categorie Cirkelzagen. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
Instruction Manual
Original Instruction Manual
EK7650H
EK7651H
Important:
Read this instruction manual carefully before putting the Power Cutter into operation and strictly observe the safety
regulations!
Keep this instruction manual!
2
Thank you for purchasing a MAKITA
product!
Congratulations on choosing a MAKITA Power Cutter! We are
condent that you will be satised with this modern piece of
equipment.
We want you to be satised with your MAKITA product.
In order to guarantee the optimal function and performance of your
Power Cutter and to ensure your personal safety we would request
you to perform the following:
Read this instruction manual carefully before putting the Power
Cutter into operation for the rst time, and strictly observe the
safety regulations! Failure to observe these precautions can
lead to severe injury or death!
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine: Power Cutter
Model No./ Type: EK7650H, EK7651H
Specications: see “Technical data” table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or
standardised documents:
EN ISO 19432
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by Directive
2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 113 dB (A)
Guaranteed Sound Power Level: 114 dB (A)
14. 1. 2011
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
English
Table of Contents Page
Packing ............................................................................................2
Delivery inventory ..........................................................................3
Symbols...........................................................................................3
SAFETY PRECAUTIONS ................................................................4
General precautions ...................................................................4
Protective equipment .................................................................4
Fuels / Refuelling .......................................................................5
Putting into operation .................................................................5
Cutoff discs ................................................................................6
Kickback and lock-in ..................................................................7
Working behavior / Method of working .......................................7
Cutting metals ............................................................................8
Cutting masonry and concrete ...................................................8
Transport and storage ................................................................9
Maintenance .............................................................................10
First aid ....................................................................................10
Technical data ............................................................................... 11
Denomination of components .....................................................12
PUTTING INTO OPERATION ........................................................13
Mounting the cutting disc ......................................................... 13
Tightening the V-belt / Checking V-belt tension .......................14
Before operating .......................................................................14
Operating .......................................................................................16
Starting .....................................................................................16
Adjusting the carburetor ............................................................17
MAINTENANCE .............................................................................17
V-belt .......................................................................................18
Cleaning the protection hood ...................................................18
Cleaning/changing the air lter .................................................19
Spark plug maintenance ..........................................................20
Replacing the suction head ......................................................20
Cleaning the starter ..................................................................21
Changing the cutting attachment position (central/side) ..........22
SPECIAL ACCESSORIES .............................................................23
Diamond cutting discs ..............................................................23
Guide trolley ............................................................................. 23
Water tank (the component of trolley) ......................................23
Mains/pressure water system ..................................................23
Maintenance chart ........................................................................24
Fault location ................................................................................25
Troubleshooting ...........................................................................26
Storage .......................................................................................... 27
Packing
Your MAKITA Power Cutter is packed in a cardboard box to prevent
shipping damage.
Cardboard is a basic raw material and is consequently reuseable or
suitable for recycling (waste paper recycling).
(Original instructions)
3
You will notice the following symbols on the saw and in the Instruction Manual:
Symbols
Read instruction manual and follow the
warning and safety precautions! Cutting disc dimensions
Particular care and caution! Engine-Manual start
Forbidden! Stop engine!
Wear protective helmet, eye and ear
protection, and respiratory protection! Warning! Kickback!
Wear protective gloves! Fuel (Gasoline)
No smoking! First Aid
No open re! Recycling
Direction of cutting wheel rotation CE - Marking
WARNING: the max. peripheral
speed of the cutting disc is 80 m/s!
1
2 3 4 5
Delivery inventory
1. Power Cutter
2. 13/19 AF combination wrench
3. Star-shaped wrench
4. Carburetor adjustment screwdriver
5. Adapter ring (Tools for some countries may not require this
ring.)
6. Instruction manual (not shown)
In case one of the parts listed should not be included in the
delivery inventory, please consult your sales agent.
Product specificaties
| Merk: | Makita |
| Categorie: | Cirkelzagen |
| Model: | EK7650H |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita EK7650H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Cirkelzagen Makita
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Cirkelzagen
- Cirkelzagen Panasonic
- Cirkelzagen DeWalt
- Cirkelzagen Ferm
- Cirkelzagen Hitachi
- Cirkelzagen Parkside
- Cirkelzagen Skil
- Cirkelzagen Triton
- Cirkelzagen Vonroc
- Cirkelzagen Worx
- Cirkelzagen Black And Decker
- Cirkelzagen Hilti
- Cirkelzagen Truper
- Cirkelzagen Fieldmann
- Cirkelzagen Mafell
- Cirkelzagen Malmbergs
- Cirkelzagen Porter-Cable
Nieuwste handleidingen voor Cirkelzagen
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022