Makita DUN461W Handleiding

Makita Heggenschaar DUN461W

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita DUN461W (16 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
INSTRUCTION MANUAL
Cordless Pole Hedge Trimmer
DUN461W
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUN461W
Blade length 460 mm
Strokes per minute 3,600 min-1
Cutting blade angle 135ยฐ (up 60ยฐ, down 75ยฐ)
Overall length 1,889 - 2,511 mm
Rated voltage D.C. 18 V
Net weight 3.0 - 3.3 kg
โ€ข๎˜ƒ Due๎˜ƒto๎˜ƒour๎˜ƒcontinuing๎˜ƒprogram๎˜ƒof๎˜ƒresearch๎˜ƒand๎˜ƒdevelopment,๎˜ƒthe๎˜ƒspeci๎šฟcations๎˜ƒherein๎˜ƒare๎˜ƒsubject๎˜ƒto๎˜ƒchange๎˜ƒ
without notice.
โ€ข๎˜ƒ Speci๎šฟcations๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒfrom๎˜ƒcountry๎˜ƒto๎˜ƒcountry.
โ€ข๎˜ƒ The๎˜ƒweight๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒdepending๎˜ƒon๎˜ƒthe๎˜ƒattachment(s),๎˜ƒincluding๎˜ƒthe๎˜ƒbattery๎˜ƒcartridge.๎˜ƒThe๎˜ƒlightest๎˜ƒand๎˜ƒheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎˜ƒcartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
โ€ข๎˜ƒ Some๎˜ƒof๎˜ƒthe๎˜ƒbattery๎˜ƒcartridges๎˜ƒand๎˜ƒchargers๎˜ƒlisted๎˜ƒabove๎˜ƒmay๎˜ƒnot๎˜ƒbe๎˜ƒavailable๎˜ƒdepending๎˜ƒon๎˜ƒyour๎˜ƒregion๎˜ƒof๎˜ƒ
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎˜ƒUse๎˜ƒof๎˜ƒany๎˜ƒother๎˜ƒbattery๎˜ƒcartridges๎˜ƒ
and๎˜ƒchargers๎˜ƒmay๎˜ƒcause๎˜ƒinjury๎˜ƒand/or๎˜ƒ๎šฟre.
Recommended cord connected power source
Portable power pack PDC01
โ€ข๎˜ƒ The๎˜ƒcord๎˜ƒconnected๎˜ƒpower๎˜ƒsource(s)๎˜ƒlisted๎˜ƒabove๎˜ƒmay๎˜ƒnot๎˜ƒbe๎˜ƒavailable๎˜ƒdepending๎˜ƒon๎˜ƒyour๎˜ƒregion๎˜ƒof๎˜ƒresidence.
โ€ข๎˜ƒ Before๎˜ƒusing๎˜ƒthe๎˜ƒcord๎˜ƒconnected๎˜ƒpower๎˜ƒsource,๎˜ƒread๎˜ƒinstruction๎˜ƒand๎˜ƒcautionary๎˜ƒmarkings๎˜ƒon๎˜ƒthem.
Symbols
The๎˜ƒfollowings๎˜ƒshow๎˜ƒthe๎˜ƒsymbols๎˜ƒwhich๎˜ƒmay๎˜ƒbe๎˜ƒused๎˜ƒ
for๎˜ƒthe๎˜ƒequipment.๎˜ƒBe๎˜ƒsure๎˜ƒthat๎˜ƒyou๎˜ƒunderstand๎˜ƒtheir๎˜ƒ
meaning before use.
Read instruction manual.
Do not expose to moisture.
Wear a helmet, goggles and ear protection.
DANGER๎˜ƒ-๎˜ƒKeep๎˜ƒhands๎˜ƒaway๎˜ƒfrom๎˜ƒblade.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Ni-MH
Li-ion
Only๎˜ƒfor๎˜ƒEU๎˜ƒcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and๎˜ƒbatteries๎˜ƒmay๎˜ƒhave๎˜ƒa๎˜ƒnegative๎˜ƒimpact๎˜ƒ
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators๎˜ƒshould๎˜ƒbe๎˜ƒstored๎˜ƒseparately๎˜ƒ
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This๎˜ƒis๎˜ƒindicated๎˜ƒby๎˜ƒthe๎˜ƒsymbol๎˜ƒof๎˜ƒthe๎˜ƒ
crossed-out wheeled bin placed on the
equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation
Intended use
The tool is intended for trimming hedges.
3 ENGLISH
Noise
The๎˜ƒtypical๎˜ƒA-weighted๎˜ƒnoise๎˜ƒlevel๎˜ƒdetermined๎˜ƒaccord-
ing to EN62841-4-2:
Sound pressure level (LpA ) : 74 dB(A)
Uncertainty๎˜ƒ(K)๎˜ƒ:๎˜ƒ3๎˜ƒdB(A)
The๎˜ƒnoise๎˜ƒlevel๎˜ƒunder๎˜ƒworking๎˜ƒmay๎˜ƒexceed๎˜ƒ80๎˜ƒdB๎˜ƒ(A).
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and๎˜ƒmay๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒanother.
NOTE:
The๎˜ƒdeclared๎˜ƒnoise๎˜ƒemission๎˜ƒvalue(s)๎˜ƒmay๎˜ƒ
also๎˜ƒbe๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒexposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can di๓ฐ€จer from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o๓ฐ€จ and when
it is running idle in addition to the trigger time).
Vibration
Applicable standard : EN62841-4-2
Left hand (Front grip) Right hand (Rear grip)
ah (m/s2)Uncertainty๎˜ƒK๎˜ƒ(m/s2) ah (m/s2)Uncertainty๎˜ƒK๎˜ƒ(m/s2)
2.5 m/s2 or less 2.5 m/s1.5 2 or less 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒanother.
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue(s)๎˜ƒmay๎˜ƒalso๎˜ƒbe๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒexposure.
WARNING: The vibration emission during actual use of the power tool can di๓ฐ€จer from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o๓ฐ€จ and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The๎˜ƒEC๎˜ƒdeclaration๎˜ƒof๎˜ƒconformity๎˜ƒis๎˜ƒincluded๎˜ƒas๎˜ƒAnnex๎˜ƒA๎˜ƒ
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speci๎šฟcations provided with this
power tool. Failure to follow all instructions listed below
may๎˜ƒresult๎˜ƒin๎˜ƒelectric๎˜ƒshock,๎˜ƒ๎šฟre๎˜ƒand/or๎˜ƒserious๎˜ƒinjury.
Save all warnings and instruc-
tions for future reference.
The๎˜ƒterm๎˜ƒ"power๎˜ƒtool"๎˜ƒin๎˜ƒthe๎˜ƒwarnings๎˜ƒrefers๎˜ƒto๎˜ƒyour๎˜ƒ
mains-operated๎˜ƒ(corded)๎˜ƒpower๎˜ƒtool๎˜ƒor๎˜ƒbattery-operated๎˜ƒ
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎›€ammable
liquids, gases or dust. Power tools create sparks
which๎˜ƒmay๎˜ƒignite๎˜ƒthe๎˜ƒdust๎˜ƒor๎˜ƒfumes.
3.
Keep children and bystanders away while operating
a power tool.๎˜ƒDistractions๎˜ƒcan๎˜ƒcause๎˜ƒyou๎˜ƒto๎˜ƒlose๎˜ƒcontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎šฟed๎˜ƒplugs๎˜ƒand๎˜ƒmatching๎˜ƒoutlets๎˜ƒwill๎˜ƒ
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎˜ƒshock๎˜ƒif๎˜ƒyour๎˜ƒbody๎˜ƒis๎˜ƒearthed๎˜ƒor๎˜ƒgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
7. Power tools can produce electromagnetic
๎šฟelds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.

Product specificaties

Merk: Makita
Categorie: Heggenschaar
Model: DUN461W

Heb je hulp nodig?

Als je hulp nodig hebt met Makita DUN461W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Heggenschaar Makita

Makita

Makita DUN461WZ Handleiding

1 Juni 2023
Makita

Makita EN7350SH Handleiding

29 Mei 2023
Makita

Makita BUH521Z Handleiding

16 Mei 2023
Makita

Makita DUP361 Handleiding

15 Mei 2023
Makita

Makita DUN600LRTE Handleiding

13 Mei 2023
Makita

Makita DUH523 Handleiding

10 Mei 2023
Makita

Makita UH4830 Handleiding

7 Mei 2023
Makita

Makita UH200DWX Handleiding

2 Mei 2023
Makita

Makita UH303DST Handleiding

1 Mei 2023
Makita

Makita DUH651 Handleiding

30 April 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Proviel

Proviel PVH 600 Handleiding

19 November 2024
Proviel

Proviel PVHA 24 Handleiding

19 November 2024
Proviel

Proviel PVH 660 Handleiding

19 November 2024
Proviel

Proviel PVH 550 Handleiding

19 November 2024
Anova

Anova CG2660 Handleiding

17 November 2024
Sovereign

Sovereign SHT 550 Handleiding

16 November 2024
Gardenline

Gardenline GLH 690 Handleiding

16 November 2024
Gardenline

Gardenline GLHT 680 Handleiding

16 November 2024
Gardenline

Gardenline GLH 664 Handleiding

16 November 2024
Gardenline

Gardenline GLHT 551 Handleiding

16 November 2024