Makita DUH752 Handleiding
Makita
Heggenschaar
DUH752
Lees hieronder de ๐ handleiding in het Nederlandse voor Makita DUH752 (16 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 109 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
INSTRUCTION MANUAL
Cordless Hedge Trimmer
DUH501
DUH601
DUH751
DUH502
DUH602
DUH752
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUH501 DUH601 DUH751
Blade length 500 mm 600 mm 750 mm
Strokes per minute 0 - 2,000 / 0 - 3,600 / 0 - 4,400 min
-1
Overall length 1,016 mm 1,121 mm 1,261 mm
Rated voltage D.C. 18 V
Net weight 3.8 - 4.5 kg
Model: DUH502 DUH602 DUH752
Blade length 500 mm 600 mm 750 mm
Strokes per minute 0 - 2,000 / 0 - 3,600 / 0 - 4,400 min
-1
Overall length 1,016 mm 1,121 mm 1,261 mm
Rated voltage D.C. 18 V
Net weight 3.8 - 4.5 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎may๎differ๎from๎country๎to๎country.
โข๎ The๎weight๎may๎differ๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
โข๎ Some๎of๎the๎battery๎cartridges๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎residence.
WARNING: Only use the battery cartridges listed above.๎Use๎of๎any๎other๎battery๎cartridges๎may๎cause๎
injury๎and/or๎๎ฟre.
Symbols
The๎followings๎show๎the๎symbols๎used๎for๎the๎equip-
ment.๎Be๎sure๎that๎you๎understand๎their๎meaning๎before๎
use.
Read instruction manual.
Do not expose to moisture.
Ni-MH
Li-ion
Only๎for๎EU๎countries
Do๎not๎dispose๎of๎electric๎equipment๎or๎
battery๎pack๎together๎with๎household๎waste๎
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment๎and๎Batteries๎and๎Accumulators๎
and Waste Batteries and Accumulators
and their implementation in accordance
with๎national๎laws,๎electric๎equipment๎and๎
batteries๎and๎battery๎pack(s)๎that๎have๎
reached the end of their life must be col-
lected๎separately๎and๎returned๎to๎an๎envi-
ronmentally๎compatible๎recycling๎facility.
Intended use
The tool is intended for trimming hedges.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided with this
power tool. Failure to follow all instructions listed below
may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless)๎power๎tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which๎may๎ignite๎the๎dust๎or๎fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎to๎lose๎control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎ฟed๎plugs๎and๎matching๎outlets๎will๎
reduce risk of electric shock.
3 ENGLISH
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎shock๎if๎your๎body๎is๎earthed๎or๎grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
๎ฟelds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎tools๎may๎result๎in๎serious๎personal๎injury.
2. Use personal protective equipment. Always
wear eye protection.๎Protective๎equipment๎such๎
as๎a๎dust๎mask,๎non-skid๎safety๎shoes,๎hard๎hat๎or๎
hearing protection used for appropriate conditions
will๎reduce๎personal๎injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎Carrying๎power๎tools๎with๎
your๎๎ฟnger๎on๎the๎switch๎or๎energising๎power๎tools๎
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎A๎wrench๎or๎a๎key๎left๎
attached๎to๎a๎rotating๎part๎of๎the๎power๎tool๎may๎
result๎in๎personal๎injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.๎Loose๎clothes,๎jewellery๎or๎
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can๎cause๎severe๎injury๎within๎a๎fraction๎of๎a๎
second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
power๎tool๎will๎do๎the๎job๎better๎and๎safer๎at๎the๎
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off.๎Any๎power๎tool๎that๎cannot๎
be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing power
tools.๎Such๎preventive๎safety๎measures๎reduce๎
the๎risk๎of๎starting๎the๎power๎tool๎accidentally.
4. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
5.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, break-
age of parts and any other condition that may
affect the power toolโs operation. If damaged, have
the power tool repaired before use.๎Many๎accidents๎
are๎caused๎by๎poorly๎maintained๎power๎tools.
6. Keep cutting tools sharp and clean.๎Properly๎
maintained cutting tools with sharp cutting edges
are๎less๎likely๎to๎bind๎and๎are๎easier๎to๎control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
8. Keep handles and grasping surfaces dry,
clean and free from oil and grease.๎Slippery๎
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
Product specificaties
| Merk: | Makita |
| Categorie: | Heggenschaar |
| Model: | DUH752 |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita DUH752 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heggenschaar Makita
1 Juni 2023
29 Mei 2023
16 Mei 2023
15 Mei 2023
13 Mei 2023
10 Mei 2023
7 Mei 2023
2 Mei 2023
1 Mei 2023
30 April 2023
Handleiding Heggenschaar
- Heggenschaar Bosch
- Heggenschaar DeWalt
- Heggenschaar Karcher
- Heggenschaar WOLF-Garten
- Heggenschaar Al-ko
- Heggenschaar Atika
- Heggenschaar Batavia
- Heggenschaar Bavaria
- Heggenschaar Black Decker
- Heggenschaar Brandson
- Heggenschaar Budget
- Heggenschaar Dolmar
- Heggenschaar Echo
- Heggenschaar Efco
- Heggenschaar Einhell
- Heggenschaar Eurogarden
- Heggenschaar Ferm
- Heggenschaar Ferrex
- Heggenschaar Florabest
- Heggenschaar Flymo
- Heggenschaar Fuxtec
- Heggenschaar Gamma
- Heggenschaar Garden Feelings
- Heggenschaar Garden Groom
- Heggenschaar Gardena
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Greenworks
- Heggenschaar Grizzly
- Heggenschaar Gude
- Heggenschaar Hanseatic
- Heggenschaar Hikoki
- Heggenschaar Hitachi
- Heggenschaar Hoberg
- Heggenschaar Homelite
- Heggenschaar Honda
- Heggenschaar Husqvarna
- Heggenschaar Hyundai
- Heggenschaar Kaaz
- Heggenschaar Kibani
- Heggenschaar Kingcraft
- Heggenschaar Kress
- Heggenschaar Levita
- Heggenschaar Lux Tools
- Heggenschaar McCulloch
- Heggenschaar Metabo
- Heggenschaar Milwaukee
- Heggenschaar Mr Gardener
- Heggenschaar Parkside
- Heggenschaar Pattfield
- Heggenschaar Powerpeak
- Heggenschaar Powerplus
- Heggenschaar Remington
- Heggenschaar Robust
- Heggenschaar Ryobi
- Heggenschaar Scheppach
- Heggenschaar Shindaiwa
- Heggenschaar Skil
- Heggenschaar Sterwins
- Heggenschaar Stiga
- Heggenschaar Stihl
- Heggenschaar Tanaka
- Heggenschaar Tel Sell
- Heggenschaar Texas
- Heggenschaar Toledo
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar Varo
- Heggenschaar Vonroc
- Heggenschaar Worx
- Heggenschaar Yardforce
- Heggenschaar Zipper
- Heggenschaar Ozito
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar Meec Tools
- Heggenschaar Cotech
- Heggenschaar Fieldmann
- Heggenschaar McGregor
- Heggenschaar Sun Joe
- Heggenschaar Challenge
- Heggenschaar Cramer
- Heggenschaar EGO
- Heggenschaar Grouw
- Heggenschaar Gtech
- Heggenschaar Hurricane
- Heggenschaar MacAllister
- Heggenschaar Maruyama
- Heggenschaar Sovereign
- Heggenschaar Spear & Jackson
- Heggenschaar CMI
- Heggenschaar Powerworks
- Heggenschaar Craftsman
- Heggenschaar Verto
- Heggenschaar G-Technology
- Heggenschaar Jonsered
- Heggenschaar Qualcast
- Heggenschaar Bestgreen
- Heggenschaar Baumr-AG
- Heggenschaar Martha Stewart
- Heggenschaar Mac Allister
- Heggenschaar Deltafox
- Heggenschaar Anova
- Heggenschaar Palmera
- Heggenschaar Proviel
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
- Heggenschaar Maxbear
- Heggenschaar Yellow Garden Line
Nieuwste handleidingen voor Heggenschaar
19 November 2024
19 November 2024
19 November 2024
19 November 2024
17 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024