Makita DUH604SRT Handleiding

Makita Heggenschaar DUH604SRT

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DUH604SRT (20 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

INSTRUCTION MANUAL

Cordless Hedge Trimmer

DUH604S

DUH754S

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DUH604S DUH754S

Blade length 600 mm 750 mm

Strokes per minute 2,000 / 3,600 / 4,400 min

-1

Overall length 1,061 mm 1,200 mm

Rated voltage D.C. 18 V

Net weight 3.4 - 3.9 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

•

Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionofresidence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Recommended battery adapter

Batteryadapter PDC01

• Thebatteryadapter(s)listedabovemaynotbeavailabledependingonyourregionofresidence.

• Beforeusingthebatteryadapter,readinstructionandcautionarymarkingsonthebatteryadapter.

Symbols

Thefollowingsshowthesymbolsusedfortheequipment.

Besurethatyouunderstandtheirmeaningbeforeuse.

Read instruction manual.

Do not expose to moisture.

Beware of pinching.

Wearsafetyglasses.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentor

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

EquipmentandBatteriesandAccumulators

and Waste Batteries and Accumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for trimming hedges.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-4-2:

Model DUH604S

Soundpressurelevel(L

pA):79.3dB(A)

Soundpowerlevel(L

WA):90.3dB(A)

Uncertainty(K):3dB(A)

Model DUH754S

Soundpressurelevel(L

pA):80.6dB(A)

Soundpowerlevel(L

WA):91.6dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

NOTE:Thedeclarednoiseemissionvalue(s)has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE:Thedeclarednoiseemissionvalue(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN62841-4-2:

Model DUH604S

Vibrationemission(a

h):2.5m/s2 or less

Uncertainty(K):1.5m/s

Model DUH754S

Vibrationemission(a

h):2.5m/s2 or less

Uncertainty(K):1.5m/s

NOTE:Thedeclaredvibrationtotalvalue(s)hasbeen

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during

actual use of the power tool can dier from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless)powertool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

asadustmask,non-skidsafetyshoes,hardhator

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.Carryingpowertoolswith

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

Product specificaties

Merk:	Makita
Categorie:	Heggenschaar
Model:	DUH604SRT

Heb je hulp nodig?

Als je hulp nodig hebt met Makita DUH604SRT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heggenschaar Makita

Makita DUN461WZ Handleiding

1 Juni 2023

Makita EN7350SH Handleiding

29 Mei 2023

Makita BUH521Z Handleiding

16 Mei 2023

Makita DUP361 Handleiding

15 Mei 2023

Makita DUN600LRTE Handleiding

13 Mei 2023

Makita DUH523 Handleiding

10 Mei 2023

Makita UH4830 Handleiding

7 Mei 2023

Makita UH200DWX Handleiding

2 Mei 2023

Makita UH303DST Handleiding

1 Mei 2023

Makita DUH651 Handleiding

30 April 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Proviel PVH 600 Handleiding

19 November 2024

Proviel PVHA 24 Handleiding

19 November 2024

Proviel PVH 660 Handleiding

19 November 2024

Proviel PVH 550 Handleiding

19 November 2024

Anova CG2660 Handleiding

17 November 2024

Sovereign SHT 550 Handleiding

16 November 2024

Gardenline GLH 690 Handleiding

16 November 2024

Gardenline GLHT 680 Handleiding

16 November 2024

Gardenline GLH 664 Handleiding

16 November 2024

Gardenline GLHT 551 Handleiding

16 November 2024