Makita DS4011 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DS4011 (32 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 90 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
GB
Drill Instruction Manual
F
Perceuse Manuel d’instructions
D
Bohrmaschine Betriebsanleitung
I
Trapano Istruzioni per l’uso
NL
Boormachine Gebruiksaanwijzing
E
Taladro Manual de instrucciones
P
Furadeira Manual de instruções
DK
Boremaskine Brugsanvisning
GR Τρυπάνι Οδηγίες χρήσεως
DS4010
DS4011
DS5000
2
1
2
3
14
5
6
7
8
1 2
3 4
5 6
7
3
ENGLISH (Original instructions)
Explanation of general view
1 Switch trigger
2 Lock button
3 Counterclockwise
4 Clockwise
5 Drill chuck
6 Limit mark
7 Brush holder cap
8 Screwdriver
SPECIFICATIONS
Model DS4010 DS4011 DS5000
Capacities
Steel ................................................................... 13 mm 13 mm 16 mm
Wood .................................................................. 36 mm 36 mm 36 mm
No load speed (min–1 ) ........................................... 0 – 600 600 600
Overall length ........................................................ 340 mm 340 mm 348 mm
Net weight .............................................................. 2.8 kg 2.8 kg 3.0 kg
Safety class ........................................................... /II /II /II
Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
ENE032-1
Intended use
The tool is intended for drilling in wood, metal and plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB001-6
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting alive” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.


Product specificaties

Merk: Makita
Categorie: Boormachine
Model: DS4011
Gewicht: 2800 g
Breedte: 83 mm
Diepte: 340 mm
Hoogte: 401 mm
Stroombron: AC
Uitgangsvermogen: 750 W
Stationair toerental (max): 600 RPM
Boor diameter in staal (max): 13 mm
Boor diameter in hout (max): 36 mm
Boorhouder: Sleutel

Heb je hulp nodig?

Als je hulp nodig hebt met Makita DS4011 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Makita

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine