Makita DHP485RTJ Handleiding

Makita Boormachine DHP485RTJ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DHP485RTJ (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

DHP485

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DHP485

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

• Specicationsmaydifferfromcountrytocountry.

Applicable battery cartridge

WARNING: Only use the battery cartridges listed above.

injuryand/orre.

Symbols

Ni-MH

Li-ion

Intended use

Noise

WARNING: Wear ear protection.

Vibration

NOTE:

3 ENGLISH

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.Looseclothes,jewelleryor

long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action

cancausesevereinjurywithinafractionofa

second.

9. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	DHP485RTJ
Kleur van het product:	Black,Blue
Gewicht:	1500 g
Breedte:	79 mm
Diepte:	169 mm
Hoogte:	256 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Soft grip:	Ja
Inactieve snelheid (1ste versnelling):	500 RPM
Inactieve snelheid (2e versnelling):	1900 RPM
Stationair toerental (max):	28500 RPM
Maximum koppel:	50 Nm
Boor diameter in staal (max):	13 mm
Boor diameter in beton (max):	13 mm
Boor diameter in hout (max):	38 mm
Geluidsdrukniveau:	82 dB
Aantal versnellingen:	2
Onzekerheid K:	1.5 m/s²
Opbergetui:	Ja
Reverse:	Ja
Boorhouder:	Zonder sleutel
Ingebouwd licht:	Ja
Boren:	Ja
Schroeven:	Ja
Draaistanden:	21
Maximale koppel (zachte applicaties):	25 Nm
Spanklauw breedte (min):	1.5 mm
Spanklauw breedte (max):	13 mm
Schroefdraad booras:	1/2"
Trillingsniveau (metaalboren):	2.5 m/s²
Maximale koppel (harde applicaties):	50 Nm
Inclusief acculader:	Ja
Inclusief batterij:	Ja
Batterij capaciteit:	5 Ah
Aanpasbare snelheid:	Ja
Geluidsniveau onzekerheid:	3 dB
Klopboren:	Ja
Aantal slagen (hoge snelheid):	7500 bpm
Vibratie emissie:	2.5 m/s²
Trillingsniveau (betonboren):	8 m/s²
Productontwerp:	Boormachine met pistoolgreep
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Geluidsvermogensniveau:	93 dB
Aantal slagen (lage snelheid):	28500 bpm