Makita DHP482T1JW Handleiding

Makita Boormachine DHP482T1JW

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DHP482T1JW (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

DHP482

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DHP482

Drilling capacities 13 mmConcrete

Steel 13 mm

Wood 38 mm

Fastening capacities Wood screw 10 mm x 90 mm

Machine screw M6

No load speed High (2) 0 - 1,900 min-1

Low (1) 0 - 600 min-1

Blows per minute High (2) 0 - 28,500 min-1

Low (1) 0 - 9,000 min-1

Overall length 198 mm

Rated voltage D.C. 18 V

Battery cartridge BL1815N, BL1820, BL1820B BL1830, BL1840, BL1850,

BL1840B, BL1850B

Net weight 1.5 kg 1.8 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for impact drilling in brick, concrete

and stone. It is also suitable for screw driving and drill-

ing without impact in wood, metal, ceramic and plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 82 dB(A)

Sound power level (LWA) : 93 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (a

h,ID) : 6.0 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

Makita declares that the following Machine(s):

Designation of Machine: Cordless Hammer Driver Drill

Model No./ Type: DHP482

Conforms to the following European Directives:

2006/42/EC

3ENGLISH

They are manufactured in accordance with the following

standard or standardized documents: EN60745

Thetechnicalleinaccordancewith2006/42/ECis

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

30.3.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.Looseclothes,jewel-

lery or long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

Power tool use and care

1. Do not force the power tool. Use the correct

power tool for your application. The correct

powertoolwilldothejobbetterandsaferatthe

rate for which it was designed.

2. Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

3. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such pre

ventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

5. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	DHP482T1JW
Kleur van het product:	Black, Blue, White
Gewicht:	1800 g
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Soft grip:	Ja
Stationair toerental (max):	1900 RPM
Maximum koppel:	62 Nm
Boor diameter in staal (max):	13 mm
Boor diameter in beton (max):	- mm
Boor diameter in hout (max):	38 mm
Geluidsdrukniveau:	82 dB
Aantal versnellingen:	2
Onzekerheid K:	1.5 m/s²
Opbergetui:	Ja
Reverse:	Ja
Boorhouder:	Zonder sleutel
Ingebouwd licht:	Ja
Boren:	Ja
Schroeven:	Ja
Draaistanden:	22
Spanklauw breedte (min):	1.5 mm
Spanklauw breedte (max):	13 mm
Trillingsniveau (metaalboren):	2.5 m/s²
Inclusief acculader:	Ja
Inclusief batterij:	Ja
Batterij capaciteit:	5 Ah
Aanpasbare snelheid:	Ja
Stationair toerental (min):	600 RPM
Klopboren:	Ja
Instelbaar aandraaimoment:	Ja
Moment (min):	36 Nm
Aantal inbegrepen batterijen:	1 stuk(s)
Boorstift inbegrepen:	Nee
Productontwerp:	Boormachine met pistoolgreep
Trillingsniveau onzekerheid (betonboren):	6 m/s²
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Geluidsvermogensniveau:	93 dB
Inclusief draadloos gereedschap:	Draadloze combiboormachine
Indicator voor vooruit/achteruit:	Ja