Makita DHP458RM3J Handleiding

Makita Boormachine DHP458RM3J

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DHP458RM3J (21 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Hammer Driver Drill

DHP448

DHP458

012710

ENGLISH (Original instructions)

SPECIFICATIONS

Model DHP448 DHP458

Drilling into concrete 14 mm 16 mm

Drilling into steel 13 mm 13 mm

Drilling into wood 65 mm 76 mm

Fastening wood screw 8 mm x 75 mm 10 mm x 90 mm

Capacities

Fastening machine screw 6 mm

High (2) 0 - 1,800 min-1 0 - 2,000 min-1

No load speed Low (1) 0 - 350 min-1 0 - 400 min-1

High (2) 0 - 27,000 min

-1 0 - 30,000 min

-1

Blows per minute Low (1) 0 - 5,200 min-1 0 - 6,000 min-1

Overall length 225 mm

Net weight 2.2 kg 2.3 kg

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

󺹮 Read instruction manual.

󺹮 Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE079-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone. It is also suitable for screw driving and drilling

without impact in wood, metal, ceramic and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model DHP448

Sound pressure level (L

pA) : 82 dB (A)

Sound power level (L

WA) : 93 dB (A)

Uncertainty (K) : 3 dB (A)

Model DHP458

Sound pressure level (L

pA) : 84 dB (A)

Sound power level (L

WA) : 95 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model DHP448

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

Model DHP458

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Ni-MH

Li-ion

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Hammer Driver Drill

Model No./ Type: DHP448,DHP458

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.12.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	DHP458RM3J
Kleur van het product:	Black, Blue, Metallic
Gewicht:	2300 g
Breedte:	79 mm
Diepte:	225 mm
Hoogte:	259 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Soft grip:	Ja
Batterij-indicator:	Ja
Inactieve snelheid (1ste versnelling):	400 RPM
Inactieve snelheid (2e versnelling):	2000 RPM
Stationair toerental (max):	2000 RPM
Maximum koppel:	91 Nm
Boor diameter in staal (max):	13 mm
Boor diameter in beton (max):	16 mm
Boor diameter in hout (max):	76 mm
Geluidsdrukniveau:	84 dB
Aantal versnellingen:	2
Onzekerheid K:	1.5 m/s²
Opbergetui:	Ja
Reverse:	Ja
Boorhouder:	Zonder sleutel
Ingebouwd licht:	Ja
Boren:	Ja
Schroeven:	Ja
Draaistanden:	21
Maximale koppel (zachte applicaties):	58 Nm
Spanklauw breedte (min):	1.5 mm
Spanklauw breedte (max):	13 mm
Maximale koppel (harde applicaties):	91 Nm
Inclusief acculader:	Ja
Inclusief batterij:	Ja
Batterij capaciteit:	4 Ah
Aanpasbare snelheid:	Ja
Geluidsniveau onzekerheid:	3 dB
Klopboren:	Ja
Aantal slagen (hoge snelheid):	30000 bpm
Vibratie emissie:	9.5 m/s²
Extra handgreep:	Ja
Aantal inbegrepen batterijen:	3 stuk(s)
Productontwerp:	Boormachine met pistoolgreep
Geluidsvermogensniveau:	95 dB
Aantal slagen (lage snelheid):	6000 bpm