Makita DF333DZ Handleiding
Makita
Boormachine
DF333DZ
Lees hieronder de ๐ handleiding in het Nederlandse voor Makita DF333DZ (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
INSTRUCTION MANUAL
Cordless Driver Drill
DF333D
DF033D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DF333D DF033D
Drilling capacities 10 mmSteel
Wood 21 mm
Fastening capacities Wood screw 5.1 mm x 63 mm
Machine screw M6
No load speed High (2) 0 - 1,700 min-1
Low (1) 0 - 450 min-1
Overall length 179 mm 149 mm
Rated voltage D.C. 10.8 V - 12 V max
Net weight 1.1 - 1.2 kg 0.93 - 1.1 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎may๎differ๎from๎country๎to๎country.
โข๎ The๎weight๎may๎differ๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE
โข๎ Some๎of๎the๎battery๎cartridges๎and๎chargers๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎Use๎of๎any๎other๎battery๎cartridges๎
and๎chargers๎may๎cause๎injury๎and/or๎๎ฟre.
Symbols
The๎following๎show๎the๎symbols๎used๎for๎the๎equipment.๎
Be๎sure๎that๎you๎understand๎their๎meaning๎before๎use.
Read instruction manual.
Ni-MH
Li-ion
Only๎for๎EU๎countries
Do๎not๎dispose๎of๎electric๎equipment๎or๎battery๎
pack together with household waste material!
In observance of the European Directives,
on๎Waste๎Electric๎and๎Electronic๎Equipment๎
and Batteries and Accumulators and Waste
Batteries and Accumulators and their imple-
mentation in accordance with national laws,
electric๎equipment๎and๎batteries๎and๎battery๎
pack(s) that have reached the end of their life
must๎be๎collected๎separately๎and๎returned๎to๎an๎
environmentally๎compatible๎recycling๎facility.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The๎typical๎A-weighted๎noise๎level๎determined๎accord-
ing to EN62841-2-1:
Model DF333D
Sound pressure level (LpA ) : 70 dB(A) or less
Uncertainty๎(K)๎:๎3๎dB(A)
The๎noise๎level๎under๎working๎may๎exceed๎80๎dB๎(A).
Model DF033D
Sound pressure level (LpA ) : 70 dB(A) or less
Uncertainty๎(K)๎:๎3๎dB(A)
The๎noise๎level๎under๎working๎may๎exceed๎80๎dB๎(A).
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-1:
Model DF333D
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2 or less
Uncertainty๎(K)๎:๎1.5๎m/s2
Model DF033D
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2 or less
Uncertainty๎(K)๎:๎1.5๎m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method๎and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎
another.
NOTE: The declared vibration emission value
may๎also๎be๎used๎in๎a๎preliminary๎assessment๎of๎
exposure.
3 ENGLISH
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value๎depending๎on๎the๎ways๎in๎which๎the๎tool๎is๎used.
WARNING:
Be๎sure๎to๎identify๎safety๎measures๎to๎pro-
tect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the
operating๎cycle๎such๎as๎the๎times๎when๎the๎tool๎is๎switched๎off๎
and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The๎EC๎declaration๎of๎conformity๎is๎included๎as๎Annex๎A๎
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided with this
power tool. Failure to follow all instructions listed below
may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which๎may๎ignite๎the๎dust๎or๎fumes.
3.
Keep children and bystanders away while operating a
power tool.๎Distractions๎can๎cause๎you๎to๎lose๎control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodi๎ฟed๎plugs๎and๎
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎shock๎if๎your๎body๎is๎earthed๎or๎grounded.
3.
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
5.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
7. Power tools can produce electromagnetic
๎ฟelds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎tools๎may๎result๎in๎serious๎personal๎injury.
2. Use personal protective equipment. Always
wear eye protection.๎Protective๎equipment๎such๎
as๎a๎dust๎mask,๎non-skid๎safety๎shoes,๎hard๎hat๎or๎
hearing protection used for appropriate conditions
will๎reduce๎personal๎injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎Carrying๎power๎tools๎with๎
your๎๎ฟnger๎on๎the๎switch๎or๎energising๎power๎tools๎
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎A๎wrench๎or๎a๎key๎left๎
attached๎to๎a๎rotating๎part๎of๎the๎power๎tool๎may๎
result๎in๎personal๎injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.๎Loose๎clothes,๎jewellery๎or๎
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8.
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe๎injury๎within๎a๎fraction๎of๎a๎second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
Product specificaties
Merk: | Makita |
Categorie: | Boormachine |
Model: | DF333DZ |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita DF333DZ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Makita
21 December 2024
23 November 2024
7 Mei 2024
7 Mei 2024
7 Mei 2024
30 Augustus 2023
8 Juli 2023
27 Juni 2023
20 Juni 2023
19 Juni 2023
Handleiding Boormachine
- Boormachine Bosch
- Boormachine IKEA
- Boormachine Panasonic
- Boormachine AEG
- Boormachine DeWalt
- Boormachine Baier
- Boormachine Basetech
- Boormachine Batavia
- Boormachine Bavaria
- Boormachine Berner
- Boormachine Black Decker
- Boormachine Blucave
- Boormachine Bort
- Boormachine Bruder Mannesmann
- Boormachine Defort
- Boormachine Delta
- Boormachine Dremel
- Boormachine Duro
- Boormachine Duro Pro
- Boormachine Ecomac
- Boormachine Economy
- Boormachine Einhell
- Boormachine Elu
- Boormachine Fe Powertools
- Boormachine Fein
- Boormachine Felisatti
- Boormachine Ferm
- Boormachine Ferrex
- Boormachine Festool
- Boormachine Flex
- Boormachine Gamma
- Boormachine Global
- Boormachine Goon
- Boormachine Gude
- Boormachine Hikoki
- Boormachine Hitachi
- Boormachine Holzmann
- Boormachine Huvema
- Boormachine Hyundai
- Boormachine Kawasaki
- Boormachine Kinzo
- Boormachine Kress
- Boormachine Laserliner
- Boormachine Lux Tools
- Boormachine Luxor
- Boormachine Maestro
- Boormachine Maktec
- Boormachine Max
- Boormachine Metabo
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Powerfix
- Boormachine Powerplus
- Boormachine Profitech
- Boormachine Protool
- Boormachine Robust
- Boormachine Rupes
- Boormachine Ryobi
- Boormachine Scheppach
- Boormachine Silverline
- Boormachine Skil
- Boormachine Sparky
- Boormachine Spit
- Boormachine Stanley
- Boormachine Stihl
- Boormachine Stomer
- Boormachine Tanaka
- Boormachine Texas
- Boormachine Toolcraft
- Boormachine Toolland
- Boormachine Topcraft
- Boormachine Trotec
- Boormachine Varo
- Boormachine Velleman
- Boormachine Vonroc
- Boormachine Westfalia
- Boormachine Workzone
- Boormachine Worx
- Boormachine Wurth
- Boormachine Zipper
- Boormachine Ozito
- Boormachine Clas Ohlson
- Boormachine Black And Decker
- Boormachine Steren
- Boormachine Cocraft
- Boormachine Meec Tools
- Boormachine Genesis
- Boormachine Carat
- Boormachine Eibenstock
- Boormachine Hilti
- Boormachine Cotech
- Boormachine Power Craft
- Boormachine Tacklife
- Boormachine Truper
- Boormachine Festo
- Boormachine Fieldmann
- Boormachine Mafell
- Boormachine Proxxon
- Boormachine Biltema
- Boormachine Malmbergs
- Boormachine Porter-Cable
- Boormachine Sun Joe
- Boormachine Dedra
- Boormachine Graphite
- Boormachine Narex
- Boormachine RIDGID
- Boormachine Tryton
- Boormachine Herkules
- Boormachine MSW
- Boormachine Sthor
- Boormachine Craftsman
- Boormachine Rikon
- Boormachine Cecotec
- Boormachine Verto
- Boormachine Alpha Tools
- Boormachine Hazet
- Boormachine G-Technology
- Boormachine Yato
- Boormachine Total
- Boormachine Stalco
- Boormachine Baumr-AG
- Boormachine Powerblade
- Boormachine Meister Craft
- Boormachine King Craft
- Boormachine Max Bahr
- Boormachine Toolson
- Boormachine Wolfcraft
- Boormachine Kreg
- Boormachine Rok
- Boormachine Netter Vibration
- Boormachine RUKO
- Boormachine Einhell Bavaria
- Boormachine McKenzie
- Boormachine Proviel
- Boormachine Ribimex
- Boormachine Ergotools Pattfield
- Boormachine MyTool
- Boormachine Rodcraft
- Boormachine Bavaria By Einhell
- Boormachine Handwerk
Nieuwste handleidingen voor Boormachine
16 December 2024
8 December 2024
8 December 2024
8 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
5 December 2024
5 December 2024