Makita DDF485Z Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita DDF485Z (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 124 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
INSTRUCTION MANUAL
Cordless Driver Drill
DDF485
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DDF485
Drilling capacities 13 mmSteel
Wood 38 mm
Fastening capacities Wood screw 6 mm x 75 mm
Machine screw M6
No load speed High (2) 0 - 1,900 min-1
Low (1) 0 - 500 min-1
Overall length 169 mm
Rated voltage D.C. 18 V
Net weight 1.4 - 1.7 kg
โ€ข๎€ƒ Due๎€ƒto๎€ƒour๎€ƒcontinuing๎€ƒprogram๎€ƒof๎€ƒresearch๎€ƒand๎€ƒdevelopment,๎€ƒthe๎€ƒspeci๎‚ฟcations๎€ƒherein๎€ƒare๎€ƒsubject๎€ƒto๎€ƒchange๎€ƒ
without notice.
โ€ข๎€ƒ Speci๎‚ฟcations๎€ƒmay๎€ƒdiffer๎€ƒfrom๎€ƒcountry๎€ƒto๎€ƒcountry.
โ€ข๎€ƒ The๎€ƒweight๎€ƒmay๎€ƒdiffer๎€ƒdepending๎€ƒon๎€ƒthe๎€ƒattachment(s),๎€ƒincluding๎€ƒthe๎€ƒbattery๎€ƒcartridge.๎€ƒThe๎€ƒlightest๎€ƒand๎€ƒheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
โ€ข๎€ƒ Some๎€ƒof๎€ƒthe๎€ƒbattery๎€ƒcartridges๎€ƒlisted๎€ƒabove๎€ƒmay๎€ƒnot๎€ƒbe๎€ƒavailable๎€ƒdepending๎€ƒon๎€ƒyour๎€ƒregion๎€ƒof๎€ƒresidence.
WARNING: Only use the battery cartridges listed above.๎€ƒUse๎€ƒof๎€ƒany๎€ƒother๎€ƒbattery๎€ƒcartridges๎€ƒmay๎€ƒcause๎€ƒ
injury๎€ƒand/or๎€ƒ๎‚ฟre.
Symbols
The๎€ƒfollowing๎€ƒshow๎€ƒthe๎€ƒsymbols๎€ƒused๎€ƒfor๎€ƒthe๎€ƒequip-
ment.๎€ƒBe๎€ƒsure๎€ƒthat๎€ƒyou๎€ƒunderstand๎€ƒtheir๎€ƒmeaning๎€ƒbefore๎€ƒ
use.
Read instruction manual.
Ni-MH
Li-ion
Only๎€ƒfor๎€ƒEU๎€ƒcountries
Do๎€ƒnot๎€ƒdispose๎€ƒof๎€ƒelectric๎€ƒequipment๎€ƒor๎€ƒ
battery๎€ƒpack๎€ƒtogether๎€ƒwith๎€ƒhousehold๎€ƒwaste๎€ƒ
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment๎€ƒand๎€ƒBatteries๎€ƒand๎€ƒAccumulators๎€ƒ
and Waste Batteries and Accumulators
and their implementation in accordance
with๎€ƒnational๎€ƒlaws,๎€ƒelectric๎€ƒequipment๎€ƒand๎€ƒ
batteries๎€ƒand๎€ƒbattery๎€ƒpack(s)๎€ƒthat๎€ƒhave๎€ƒ
reached the end of their life must be col-
lected๎€ƒseparately๎€ƒand๎€ƒreturned๎€ƒto๎€ƒan๎€ƒenvi-
ronmentally๎€ƒcompatible๎€ƒrecycling๎€ƒfacility.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The๎€ƒtypical๎€ƒA-weighted๎€ƒnoise๎€ƒlevel๎€ƒdetermined๎€ƒaccord-
ing to EN60745-2-1:
Sound pressure level (LpA ) : 74 dB(A)
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ3๎€ƒdB(A)
The๎€ƒnoise๎€ƒlevel๎€ƒunder๎€ƒworking๎€ƒmay๎€ƒexceed๎€ƒ80๎€ƒdB๎€ƒ(A).
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-1:
Work mode: drilling into metal
Vibration emission (a
h,D) : 2.5 m/s2 or less
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ1.5๎€ƒm/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method๎€ƒand๎€ƒmay๎€ƒbe๎€ƒused๎€ƒfor๎€ƒcomparing๎€ƒone๎€ƒtool๎€ƒwith๎€ƒ
another.
NOTE: The declared vibration emission value
may๎€ƒalso๎€ƒbe๎€ƒused๎€ƒin๎€ƒa๎€ƒpreliminary๎€ƒassessment๎€ƒof๎€ƒ
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission๎€ƒvalue๎€ƒdepending๎€ƒon๎€ƒthe๎€ƒways๎€ƒin๎€ƒwhich๎€ƒthe๎€ƒ
tool is used.
WARNING:๎€ƒBe๎€ƒsure๎€ƒto๎€ƒidentify๎€ƒsafety๎€ƒmeasures๎€ƒ
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account๎€ƒof๎€ƒall๎€ƒparts๎€ƒof๎€ƒthe๎€ƒoperating๎€ƒcycle๎€ƒsuch๎€ƒas๎€ƒ
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The๎€ƒEC๎€ƒdeclaration๎€ƒof๎€ƒconformity๎€ƒis๎€ƒincluded๎€ƒas๎€ƒAnnex๎€ƒA๎€ƒ
to this instruction manual.
3 ENGLISH
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speci๎‚ฟcations provided with this
power tool. Failure to follow all instructions listed below
may๎€ƒresult๎€ƒin๎€ƒelectric๎€ƒshock,๎€ƒ๎‚ฟre๎€ƒand/or๎€ƒserious๎€ƒinjury.
Save all warnings and instruc-
tions for future reference.
The๎€ƒterm๎€ƒ"power๎€ƒtool"๎€ƒin๎€ƒthe๎€ƒwarnings๎€ƒrefers๎€ƒto๎€ƒyour๎€ƒ
mains-operated๎€ƒ(corded)๎€ƒpower๎€ƒtool๎€ƒor๎€ƒbattery-operated๎€ƒ
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ƒ€ammable
liquids, gases or dust. Power tools create sparks
which๎€ƒmay๎€ƒignite๎€ƒthe๎€ƒdust๎€ƒor๎€ƒfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎€ƒto๎€ƒlose๎€ƒcontrol.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎‚ฟed๎€ƒplugs๎€ƒand๎€ƒmatching๎€ƒoutlets๎€ƒwill๎€ƒ
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎€ƒshock๎€ƒif๎€ƒyour๎€ƒbody๎€ƒis๎€ƒearthed๎€ƒor๎€ƒgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic ๎‚ฟelds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎ƒ€uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎€ƒtools๎€ƒmay๎€ƒresult๎€ƒin๎€ƒserious๎€ƒpersonal๎€ƒinjury.
2. Use personal protective equipment. Always
wear eye protection.๎€ƒProtective๎€ƒequipment๎€ƒsuch๎€ƒ
as๎€ƒa๎€ƒdust๎€ƒmask,๎€ƒnon-skid๎€ƒsafety๎€ƒshoes,๎€ƒhard๎€ƒhat๎€ƒor๎€ƒ
hearing protection used for appropriate conditions
will๎€ƒreduce๎€ƒpersonal๎€ƒinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎€ƒCarrying๎€ƒpower๎€ƒtools๎€ƒwith๎€ƒ
your๎€ƒ๎‚ฟnger๎€ƒon๎€ƒthe๎€ƒswitch๎€ƒor๎€ƒenergising๎€ƒpower๎€ƒtools๎€ƒ
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎€ƒA๎€ƒwrench๎€ƒor๎€ƒa๎€ƒkey๎€ƒleft๎€ƒ
attached๎€ƒto๎€ƒa๎€ƒrotating๎€ƒpart๎€ƒof๎€ƒthe๎€ƒpower๎€ƒtool๎€ƒmay๎€ƒ
result๎€ƒin๎€ƒpersonal๎€ƒinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.๎€ƒLoose๎€ƒclothes,๎€ƒjewellery๎€ƒor๎€ƒ
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause๎€ƒsevere๎€ƒinjury๎€ƒwithin๎€ƒa๎€ƒfraction๎€ƒof๎€ƒa๎€ƒsecond.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
power๎€ƒtool๎€ƒwill๎€ƒdo๎€ƒthe๎€ƒjob๎€ƒbetter๎€ƒand๎€ƒsafer๎€ƒat๎€ƒthe๎€ƒ
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off.๎€ƒAny๎€ƒpower๎€ƒtool๎€ƒthat๎€ƒcannot๎€ƒ
be controlled with the switch is dangerous and
must be repaired.


Product specificaties

Merk: Makita
Categorie: Boormachine
Model: DDF485Z
Kleur van het product: Black,Blue
Gewicht: 1700 g
Breedte: 79 mm
Diepte: 169 mm
Hoogte: 255 mm
Stroombron: Batterij/Accu
Accu/Batterij voltage: 18 V
Inactieve snelheid (1ste versnelling): 500 RPM
Inactieve snelheid (2e versnelling): 1900 RPM
Stationair toerental (max): 1900 RPM
Boor diameter in staal (max): 13 mm
Boor diameter in beton (max): - mm
Boor diameter in hout (max): 38 mm
Aantal versnellingen: 2
Boorhouder: Zonder sleutel
Ingebouwd licht: Ja
Boren: Ja
Schroeven: Ja
Maximale koppel (zachte applicaties): 27 Nm
Spanklauw breedte (min): 1.5 mm
Spanklauw breedte (max): 13 mm
Maximale koppel (harde applicaties): 50 Nm
Aanpasbare snelheid: Ja
Stationair toerental (min): 0 RPM
Instelbaar aandraaimoment: Ja
Productontwerp: Boormachine met pistoolgreep
Batterijtechnologie: Lithium-Ion (Li-Ion)
Type motor: Borstelloos
Geluidsvermogensniveau: 74 dB

Heb je hulp nodig?

Als je hulp nodig hebt met Makita DDF485Z stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Makita

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine