Makita DDF481RMJ Handleiding

Makita Boormachine DDF481RMJ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DDF481RMJ (12 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Driver Drill

DDF481

014688

ENGLISH (Original instructions)

SPECIFICATIONS

Model DDF481

Drilling into steel 13 mm

Drilling into wood 76 mm

Fastening wood screw 10 mm x 90 mm

Capacities

Fastening machine screw 6 mm

High (2) 0 - 2,100

No load speed (min-1) Low (1) 0 - 550

Overall length 205 mm

Net weight 2.6 kg

Rated voltage D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE034-1

Intended use

The tool is intended for drilling and screw driving in

wood, metal and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (LpA) : 73 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Driver Drill

Model No./ Type: DDF481

Conforms to the following European Directives:

2006/42/EC

Ni-MH

Li-ion

They are manufactured in accordance with the following

Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

22.8.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk

of electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10.

Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

moment of inattention while operating power tools

may result in serious personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

15.

Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.

Loose clothes, jewellery

or long hair can be caught in moving parts.

16.

If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used.

Use of dust

collection can reduce dust-related hazards.

Power tool use and care

17. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

18. Do not use the power tool if the switch does

not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	DDF481RMJ
Kleur van het product:	Black, Silver, Turquoise
Gewicht:	2400 g
Breedte:	79 mm
Diepte:	205 mm
Hoogte:	266 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Inactieve snelheid (1ste versnelling):	550 RPM
Inactieve snelheid (2e versnelling):	2100 RPM
Boor diameter in staal (max):	13 mm
Boor diameter in hout (max):	76 mm
Aantal versnellingen:	2
Opbergetui:	Ja
Boorhouder:	Zonder sleutel
Ingebouwd licht:	Ja
Boren:	Ja
Schroeven:	Ja
Maximale koppel (zachte applicaties):	60 Nm
Spanklauw breedte (min):	1.5 mm
Spanklauw breedte (max):	13 mm
Maximale koppel (harde applicaties):	115 Nm
Inclusief acculader:	Ja
Inclusief batterij:	Ja
Batterij capaciteit:	4 Ah
Extra handgreep:	Ja
Aantal inbegrepen batterijen:	2 stuk(s)
Productontwerp:	Boormachine met pistoolgreep
Batterijtechnologie:	Lithium-Ion (Li-Ion)